Feature: | Oxidative Degradable |
---|---|
CAS No.: | 32131-17-2 |
Formula: | (C12h22n2o2)N |
Samples: |
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
polyamide 6 based on a non-phosphorous and Non-halogenatedflame retardant system
https://forever-plastics.en.made-in-china.com/product/rJwRvlcdZpWD/China-Nylon-PA6-GF33-PA66-Granules-PA6-with-30GF-Polyamide-PA66-30-GF-PA6-Material.html Heat-conducting nylon
Product Description | ||||
TECHNYL PROTECT C 52G1 MX25 WT 9003 is a polyamide 6 based on a non-phosphorous and Non-halogenated flame retardant system, reinforced with 25% of mineral filler, heat stabilized, for injection moulding. This phosphorus and halogen free flame retardant grade offers a robust glow wire resitance. |
||||
General | ||||
Form Resin Pellets | ||||
Filler 25 % Mineral | ||||
Non-Brominated & Non- | ||||
Feature | Chlorinated Flame Retardant |
|||
Laser Markable | ||||
Uses Electrical | ||||
Physical | Nominal Value | Test Method | ||
Density / Specific Gravity | 1.38 g/cm³ | ISO 1183 | ||
Water Absorption(24 hr;23 °C) | 1.1 % | ISO 62 | ||
Water Absorption at Saturation(24 hr;23 °C) | 5.6 % | ISO 62 | ||
Molding shrinkage, parallel(50% RH;23 °C;72 hr) | 0.3 % | ISO 2577;ISO 294- 4 | ||
Molding shrinkage, normal(50% RH;23 °C;72 hr) | 0.65 % | ISO 2577;ISO 294- 4 | ||
Mechanical | Nominal Value | Test Method | ||
Dry: Tensile Modulus(1 mm/min) | 7600 MPa | ISO 527-1/-2 | ||
Condition: Tensile Modulus(1 mm/min) | 2800 MPa | ISO 527-1/-2 | ||
Dry: Stress at break | 90 MPa | ISO 527-1/-2 | ||
Condition: Stress at break | 35 MPa | ISO 527-1/-2 | ||
Dry: Strain at break | 2.2 % | ISO 527-1/-2 | ||
Condition: Strain at break | 30 % | ISO 527-1/-2 | ||
Dry: Flexural Modulus(2 mm/min) | 5500 MPa | ISO 178 | ||
Condition: Flexural Modulus(2 mm/min) | 2900 MPa | ISO 178 | ||
Dry: Flexural Strength(2 mm/min) | 100 MPa | ISO 178 | ||
Condition: Flexural Strength(2 mm/min) | 60 MPa | ISO 178 | ||
Dry: Charpy Impact Strength(23 °C) | 30 kJ/m² | ISO 179/1eU | ||
Condition: Charpy Impact Strength(23 °C) | 70 kJ/m² | ISO 179/1eU | ||
C harpy Impact Strength, Unnotched(- 30 °C) | 30 kJ/m² | ISO 179/1eU | ||
Dry: Charpy Notched Impact Strength(23 °C) | 3 kJ/m² | ISO 179/1eA | ||
Condition: Charpy Notched Impact Strength(23 °C) | 3 kJ/m² | ISO 179/1eA | ||
C harpy Notched Impact Strength(- 30 °C) | 1.5 kJ/m² | ISO 179/1eA | ||
Thermal | Nominal Value | Test Method | ||
Melting Temperature(10 °C/min) | 220 °C | ISO 11357-1 | ||
Temp. of deflection under load 0.45 MPa 1.8 MPa |
200 °C 120 °C |
ISO 75 | ||
Flammability 0.75 mm 1.5 mm 3 mm |
V-2 V-2 V-2 |
UL 94 | ||
Glow Wire Flammability Index 1.5 mm 3 mm |
960 °C 960 °C |
IEC 60695-2-12 | ||
Oxygen Index | 29 % | |||
Electrical | Nominal Value | Test Method | ||
Comparative Tracking Index(Solution A) | 600 V | IEC 60112 | ||
Dielectric Strength(1 mm) | 34 kV/mm | IEC 60243-1 | ||
Processing | Nominal Value | |||
Drying Temperature | 80 °C | |||
Dry Time(with a dehumidified air drying equipment, dew point mini -20°C) |
2 - 4 h | |||
Suggested Max Moisture | 0.002 | |||
Rear Temperature | 230 - 235 °C | |||
Middle Temperature | 235 - 240 °C | |||
Front Temperature | 235 - 245 °C | |||
Mold Temperature | 60 - 90 °C |
Forever Co.,Ltd
Suppliers with verified business licenses