CAS No.: | 9002-98-6 |
---|---|
Formula: | C39h30n2o6 |
EINECS: | 205-793-9 |
Samples: |
BAG
|
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
Product Description | ||||||||||
ULTEM HU1000E resin is an unreinforced amorphous polyetherimide (PEI) resin that may a high glass transition temperature (Tg) of 217°C. The material contains an internal mold release. The intended use for this material is in medical devices and pharmaceutical applications. The material is biocompatible (ISO 10993 or USP Class VI) and Healthcare management of change applies. The material may offer Steam-, Hydrogen Peroxide-, Gamma-, EtO-, UV-C- and E-beam resistance for repeated sterilization cycles. It may offer global food compliance (FDA, CN, EC). Features are excellent mechanical, electrical and dimensional propertie up to high temperatures. The material may offer very good chemical resistance for an amorphous material and is inherently flame retardant offering UL94 V0 and 5V ratings. The material is RoHS compliant. The base material is transparent amber colored but is also available in custom colors - transparent and opaque. | ||||||||||
General | ||||||||||
Form Resin Pellets | ||||||||||
Feature |
Biocompatible Chemical Resistant Good Thermal Clear/Transparent Low Smoke Eto And E-Beam St ili bl |
Steam Sterilization Fda Good Hardness Amorphous Low Creep Sensitivity Gamma Sterilizable |
Low Shrinkage Good Dimensional Hydrolysis Resistance Good Mechanicals Good Metal Adhesion Uv-C Resistant |
|||||||
Uses | Consumer | Healthcare | ||||||||
Physical | Nominal Value | Test Method | ||||||||
Melt Volume Rate, MVR(5 kg;MVR at 360 °C) | 13 cm³/10 min | ISO 1133 | ||||||||
Density / Specific Gravity | ||||||||||
1.27 g/cm³ | ISO 1183 | |||||||||
1.27 | ASTM D792 | |||||||||
Water Absorption | ||||||||||
24 hrs;23 °C | 0.25 % | ISO 62-1 | ||||||||
23 °C;saturated | 1.25 % | ISO 62-1 | ||||||||
24 hrs;23 °C | 0.25 % | ASTM D570 | ||||||||
23°C/Saturated | 1.25 % | ASTM D570 | ||||||||
Moisture Absorption 23 °C;50% RH/24hrs 23 °C;50% RH/Equilibrium |
0.2 % 0.7 % |
ISO 62-4 | ||||||||
Melt Flow Rate[MFR](337 °C;6.6 kgf) | 9 g/10min | ASTM D1238 | ||||||||
Poisson's Ratio | 0.36 | ASTM E132 | ||||||||
Mold Shrinkage, Flow(3.2 mm) | 0.5 - 0.7 % | Method | ||||||||
Mold Shrinkage, XFlow(3.2 mm) | 0.5 - 0.7 % | Method | ||||||||
Hardness, Rockwell M | ||||||||||
106 | ISO 2039-2 | |||||||||
109 | ASTM D785 | |||||||||
Mechanical | Nominal Value | Test Method | ||||||||
Izod Impact, Unnotched | ||||||||||
80*10*4;23 °C | NB kJ/m² | ISO 180/1U | ||||||||
80*10*4;-30 °C | NB kJ/m² | ISO 180/1U | ||||||||
23 °C | 1800 J/m | ASTM D4812 | ||||||||
-30 °C | 1540 J/m | ASTM D4812 | ||||||||
Izod Impact, Notched | ||||||||||
80*10*4;23 °C | 6 kJ/m² | ISO 180/1A | ||||||||
80*10*4;-30 °C | 6 kJ/m² | ISO 180/1A | ||||||||
23 °C | 53 J/m | ASTM D256 | ||||||||
-30 °C | 50 J/m | ASTM D256 | ||||||||
C harpy Impact, V-Notched 23 °C;Edgew;80*10*4;sp =62 mm 0 -30 °C;Edgew;80*10*4;sp =62 mm 0 |
4 kJ/m² 4 kJ/m² |
ISO 179 1eA | ||||||||
Izod Impact, Reverse Notched(3.2 mm) | 1335 J/m | ASTM D256 | ||||||||
Gardner(23 °C) | 36 J | ASTM D3029 | ||||||||
Flexural Modulus | ||||||||||
2 mm/min | 3300 MPa | ISO 178 | ||||||||
1.3 mm/min;50 mm;span | 3200 MPa | ASTM D790 | ||||||||
2.6 mm/min;100 mm;Span | 3400 MPa | ASTM D790 | ||||||||
Flexural Stress, Yield | ||||||||||
2 mm/min | 160 MPa | ISO 178 | ||||||||
1.3 mm/min;50 mm;span | 165 MPa | ASTM D790 | ||||||||
2.6 mm/min;100 mm;Span | 160 MPa | ASTM D790 | ||||||||
Ball Indentation Hardness(H358/30) | 140 MPa | ISO 2039-1 | ||||||||
Tensile Modulus | ||||||||||
1 mm/min | 3200 MPa | ISO 527 | ||||||||
5 mm/min | 3350 MPa | ASTM D638 | ||||||||
Tensile Strain, Break | ||||||||||
50 mm/min | 50 % | ISO 527 | ||||||||
50 mm/min;Type I | 60 % | ASTM D638 | ||||||||
5 mm/min;Type I | 60 % | ASTM D638 | ||||||||
Tensile Strain, Yield | ||||||||||
50 mm/min | 6 % | ISO 527 | ||||||||
50 mm/min;Type I | 7 % | ASTM D638 | ||||||||
5 mm/min;Type I | 7 % | ASTM D638 | ||||||||
Tensile Stress, Yield | ||||||||||
50 mm/min | 110 MPa | ISO 527 | ||||||||
50 mm/min;Type I | 115 MPa | ASTM D638 | ||||||||
5 mm/min;Type I | 110 MPa | ASTM D638 | ||||||||
Taber Abrasion(CS-17;1 kg;1000cy) | 10 mg | ASTM D1044 | ||||||||
Thermal | Nominal Value | Test Method | ||||||||
HDT/Bf(0.45) | 209 °C | ISO 75/Bf | ||||||||
HDT/Af(1.8) | 192 °C | ISO 75/Af | ||||||||
Vicat Softening Temperature | ||||||||||
Rate A/50 | 215 °C | ISO 306 | ||||||||
Rate B/50 | 211 °C | ISO 306 | ||||||||
Rate B/120 | 212 °C | ISO 306 | ||||||||
Rate B/50 | 211 °C | ASTM D1525 | ||||||||
CTE, Flow | ||||||||||
-20°C to 150°C | 5.2E-05 1/°C | ISO 11359-2 | ||||||||
-20°C to 150°C | 5.6E-05 1/°C | ASTM E831 | ||||||||
CTE, XFlow | ||||||||||
-20°C to 150°C | 5.2E-05 1/°C | ISO 11359-2 | ||||||||
-20°C to 150°C | 5.4E-05 1/°C | ASTM E831 | ||||||||
Ball Pressure Test(125°C +/- 2°C) | Pass | IEC 60695-10-2 | ||||||||
Thermal Conductivity | ||||||||||
0.22 W/m-K | ISO 8302 | |||||||||
0.22 W/m-K | ASTM C177 | |||||||||
Heat Deflection Temperature[HDT], Unannealed 0.45 MPa;6.4 mm 1.82 MPa;6.4 mm 0.45 MPa;3.2 mm 3.2 mm;1.82 MPa |
210 °C 201 °C 207 °C 190 °C |
ASTM D648 | ||||||||
Electrical | Nominal Value | Test Method | ||||||||
Volume Resistivity | ||||||||||
1.0e+15 ohms ·cm | IEC 60093 | |||||||||
1.0e+17 ohms ·cm | ASTM D257 | |||||||||
Surface Resistivity, ROA | > 1.E+15 Ohms | IEC 60093 | ||||||||
Dielectric Strength, in Oil | ||||||||||
0.8 mm | 33 kV/mm | IEC 60243-1 | ||||||||
1.6 mm | 25 kV/mm | IEC 60243-1 | ||||||||
3.2 mm | 16 kV/mm | IEC 60243-1 | ||||||||
1.6 mm | 28 kV/mm | ASTM D149 | ||||||||
3.2 mm | 19.7 kV/mm | ASTM D149 | ||||||||
Relative Permittivity | ||||||||||
1.0e+6 Hz | 2.9 | IEC 60250 | ||||||||
50/60 Hz | 2.9 | IEC 60250 | ||||||||
100 Hz | 3.15 | ASTM D150 | ||||||||
1.0e+3 Hz | 3.15 | ASTM D150 | ||||||||
Dissipation Factor | ||||||||||
1.0e+6 Hz | 6.0E-03 | IEC 60250 | ||||||||
50/60 Hz | 5.0E-04 | IEC 60250 | ||||||||
1.1e+9 Hz | 1.2E-03 | |||||||||
5.0e+9 Hz | 2.4E-03 | |||||||||
1.0e+10 Hz | 2.7E-03 | |||||||||
100 Hz | 1.5E-03 | ASTM D150 | ||||||||
1.0e+3 Hz | 1.2E-03 | ASTM D150 | ||||||||
Dielectric Constant | ||||||||||
1.1e+9 Hz | 3.01 | |||||||||
5.0e+9 Hz | 3.02 | |||||||||
1.0e+10 Hz | 3.02 | |||||||||
Comparative Tracking Index | 150 V | IEC 60112 | ||||||||
Comparative tracking index M | 100 V | IEC 60112 | ||||||||
Dielectric Strength, in Air(1.6 mm) | 32.7 kV/mm | ASTM D149 | ||||||||
Processing | Nominal Value | |||||||||
Drying Temperature<Extrusion Blow Molding> | 140 - 150 °C | |||||||||
Drying Time<Extrusion Blow Molding> | 4 - 6 hrs | |||||||||
Drying Time, Cumulative<Extrusion Blow Molding> | 24 hrs | |||||||||
Maximum Moisture Content<Extrusion Blow Molding> | 1.0E-02 - 0.02 % | |||||||||
Melt Temperature, Parison<Extrusion Blow Molding> | 320 - 355 °C | |||||||||
Barrel - Zone 1 Temperature<Extrusion Blow Molding> | 325 - 350 °C | |||||||||
Barrel - Zone 2 Temperature<Extrusion Blow Molding> | 330 - 355 °C | |||||||||
Barrel - Zone 3 Temperature<Extrusion Blow Molding> | 330 - 355 °C | |||||||||
Barrel - Zone 4 Temperature<Extrusion Blow Molding> | 330 - 355 °C | |||||||||
Adapter - Zone 5 Temperature<Extrusion Blow Molding> |
330 - 355 °C | |||||||||
Head - Zone 6 - Top Temperature<Extrusion Blow Molding> |
330 - 355 °C | |||||||||
Head - Zone 7 - Bottom Temperature<Extrusion Blow Molding> |
330 - 355 °C | |||||||||
Screw Speed <Extrusion Blow Molding> | 10 - 70 rpm | |||||||||
Mold Temperature<Extrusion Blow Molding> | 65 - 175 °C | |||||||||
Die Temperature<Extrusion Blow Molding> | 325 - 355 °C | |||||||||
Drying Temperature<Injection> | 150 °C | |||||||||
Drying Time<Injection> | 4 - 6 hrs | |||||||||
Drying Time, Cumulative<Injection> | 24 hrs | |||||||||
Maximum Moisture Content<Injection> | 0.02 % | |||||||||
Melt Temperature<Injection> | 350 - 410 °C | |||||||||
Nozzle Temperature<Injection> | 345 - 405 °C | |||||||||
Front, Zone 3 Temperature<Injection> | 345 - 415 °C | |||||||||
Middle, Zone 2 Temperature<Injection> | 340 - 405 °C | |||||||||
Rear, Zone 1 Temperature<Injection> | 330 - 400 °C | |||||||||
Mold Temperature<Injection> | 135 - 180 °C | |||||||||
Back Pressure<Injection> | 0.3 - 0.7 MPa | |||||||||
Screw Speed, C ircumferential Speed <Injection> | 0.2 - 0.3 m/s | |||||||||
Shot To Cylinder Size<Injection> | 40 - 60 % | |||||||||
Vent Depth <Injection> | 0.025 - 0.076 mm |
Dongguan FOREVER Co., Ltd. Was founded in 2005 and is a national high-tech enterprise and national-level specialized giant enterprise dedicated to the research and production of polymer composite modified materials. With an annual capacity of 100, 000 tons of modified engineering plastics. Since its establishment, the company has been committed to the research of high-performance composite materials such as modified PC, PC/ABS, PBT, PA6, etc. Its products have been widely used in industries such as LED lighting, consumer electronics, new energy, security equipment, and small household appliances, providing customers with efficient delivery experience, ultimate price advantages, and strict quality assurance, contributing to the creation of a green and environmentally friendly world.
Dongguan FOREVER Co., Ltd's main products has obtained UL certification for RTI authorized temperature, outdoor weather resistance F1 and 5VA flame retardancy grades, as well as recycled-certified post-consumer low-carbon circulation products. Dongguan FOREVER Co., Ltd's products are highly recognized by customers worldwide for their reliable quality, excellent performance, and superior cost-effectiveness.
With a strong focus on research and development, Dongguan FOREVER Co., Ltd. Has established an advanced technology research and development center, equipped with state-of-the-art testing and analysis equipment and a professional R&D team that has accumulated rich experience in the field of polymer composite modified materials. Dongguan FOREVER Co., Ltd also maintains close partnerships with renowned universities and research institutions to stay at the forefront of technology and drive innovation in the industry