Feature: | Natural Color |
---|---|
CAS No.: | 942626-09-7 |
Formula: | C18h18bno4 |
Samples: |
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
Product Description | ||||
FFR367 - 8487 is a low halogen no blooming flame retardant compound UL 94 V2, intended for injection moulding. The product is available in natural (FFR367) but other colours can be provided on request FFR367 - 8487 produce is UV stabilised and antistatic. Provides an excellent balance of good impact strength and rigidity. FFR367 - 8487 is especially designed for electrical/appliance applications exterior/interior. |
||||
General | ||||
Form | Resin Pellets | |||
Feature |
Non-Brominated & Non- Chlorinated Flame Retardant |
Anti-Static Low Extractables Outdoor |
Ductile Recyclable Material Medium Rigidity |
|
Uses Appliances | Electrical | |||
Physical | Nominal Value | Test Method | ||
Density / Specific Gravity | 1.14 g/cm³ | ISO 1183 | ||
Melt Mass-Flow Rate, MFR(230 °C;2.16 kg) | 19 g/10min | ISO 1133 | ||
Mechanical | Nominal Value | Test Method | ||
Tensile Stress, Yield | 14.0 MPa | ISO 527-2/50 | ||
Tensile Strain, Yield | 4.0 % | ISO 527-2/50 | ||
Flexural Modulus - 1% Secant | 1750 MPa | ISO 178 | ||
C harpy Notched Impact Strength(23 °C) | 5.0 kJ/m² | ISO 179 1eA | ||
Thermal | Nominal Value | Test Method | ||
Heat Deflection Temperature, Unannealed(0.45 MPa) | 102 °C | ISO 75-2/B | ||
Flame Rating(1.6 mm) | V-2 | UL 94 | ||
Glow Wire Flammability Index(2 mm) | 850 °C | IEC 60695-2-12 | ||
Processing | Nominal Value | |||
Drying Temperature<Injection> | 80 °C | |||
Drying Time<Injection> | 3.0 hr | |||
Processing Temp, Melt<Injection> | 210 - 240 °C | |||
Mold Temperature<Injection> | 30 - 50 °C | |||
Injection Rate<Injection> | Moderate | |||
Holding Pressure<Injection> | of the injection pressure 50 - 70 % |
Suppliers with verified business licenses