Feature: | Plastics |
---|---|
CAS No.: | 25766-59-0 |
Formula: | C6h4c(CH3)2c6h4oco2-]N |
Samples: |
25kg/bag
|
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
Product Description | ||||||
CFR5630 Polycarbonate (PC) is a non-filled resin, suitable for injection molding and extrusion. This non- chlorinated, non-brominated flame retardant PC resin meets FAR25.853 smoke density and 60 second vertical burn and OEM toxicity requirements. CFR5630 resin is available in transparent and opaque colors. | ||||||
General | ||||||
Form | Resin Pellets | |||||
Feature |
Clear/Transparent | Aeroplane Application Low Smoke |
Non-Brominated & Non- Chlorinated Flame Retardant |
|||
UL Yellow Card | E207780-101088462 | |||||
Uses Automotive | Aeroplane Application | |||||
Physical | Nominal Value | Test Method | ||||
Density / Specific Gravity | 1.19 1.2 g/cm³ |
ASTM D792 ISO 1183 |
||||
Mold Shrinkage, Flow(3.2 mm) | 0.55 - 0.75 % | SABIC Method | ||||
Mold Shrinkage, XFlow(3.2 mm) | 0.6 - 0.8 % | SABIC Method | ||||
Melt Flow Rate[MFR](300 °C;1.2 kgf) | 5 g/10min | ASTM D1238 | ||||
Water Absorption(23 °C;saturated) | 0.14 % | ISO 62-1 | ||||
Moisture Absorption(50% RH;23 °C) | 0.11 % | ISO 62 | ||||
Melt Volume Rate, MVR(1.2 kg;MVR at 300 °C) | 5 cm³/10 min | ISO 1133 | ||||
UV light, water exposure/immersion | f1 | UL 746C | ||||
Mechanical | Nominal Value | Test Method | ||||
Izod Impact, Unnotched 23 °C -30 °C |
2150 J/m 2000 J/m |
ASTM D4812 | ||||
Izod Impact, Notched 23 °C -30 °C |
100 J/m 85 J/m |
ASTM D256 | ||||
Instrumented Dart Impact, Total Energy(23 °C) | 66 J | ASTM D3763 | ||||
Unnotched Izod Impact Strength unnotched;80*10*3;23 °C 0 unnotched;80*10*3;-30 °C 0 |
NB kJ/m² NB kJ/m² |
ISO 180/1U | ||||
Notched Izod Impact Strength notched;80*10*3;23 °C 0 notched;80*10*3;-30 °C 0 |
10 kJ/m² 9 kJ/m² |
ISO 180/1A | ||||
C harpy Impact, V-Notched 23 °C;Edgew;80*10*3;sp =62mm 0 -30 °C;Edgew;80*10*3;sp =62mm 0 |
10 kJ/m² 9 kJ/m² |
ISO 179 1eA | ||||
C harpy Impact, Unnotched 23 °C;Edgew;80*10*3;sp =62mm 0 -30 °C;Edgew;80*10*3;sp =62mm 0 |
132 kJ/m² 129 kJ/m² |
ISO 179 1eU | ||||
Tensile Stress, Yield | ||||||
50 mm/min;Type I | 68 MPa | ASTM D638 | ||||
50 mm/min | 67 MPa | ISO 527 | ||||
Tensile Stress, Break | ||||||
50 mm/min;Type I | 52 MPa | ASTM D638 | ||||
50 mm/min | 52 MPa | ISO 527 | ||||
Tensile Strain, Yield | ||||||
50 mm/min;Type I | 6 % | ASTM D638 | ||||
50 mm/min | 6 % | ISO 527 | ||||
Tensile Strain, Break | ||||||
50 mm/min;Type I | 51 % | ASTM D638 | ||||
50 mm/min | 23 % | ISO 527 | ||||
Tensile Modulus | ||||||
50 mm/min | 2500 MPa | ASTM D638 | ||||
1 mm/min | 2400 MPa | ISO 527 | ||||
Flexural Stress, Yield | ||||||
1.3 mm/min;50 mm;span | 106 MPa | ASTM D790 | ||||
2 mm/min | 103 MPa | ISO 178 | ||||
Flexural Modulus | ||||||
1.3 mm/min;50 mm;span | 2400 MPa | ASTM D790 | ||||
2 mm/min | 2500 MPa | ISO 178 | ||||
Thermal | Nominal Value | Test Method |
FAA Flammability(FAR 25.853 A/B) | Pass | FAR 25.853 | ||
Vertical Burn, A(60s passes at) | 5 Seconds | FAR 25.853 | ||
Vertical Burn, B(12s passes at) | 5 Seconds | FAR 25.853 | ||
NBS Smoke Density, Flaming, Dmax | < 100 | ASTM E662 | ||
Glow Wire Ignition Temperature [GWIT] 3 mm 1 mm |
850 °C 875 °C |
IEC 60695-2-13 | ||
Glow Wire Flammability Index 3 mm 1 mm |
960 °C 960 °C |
IEC 60695-2-12 | ||
Oxygen Index | 45 % | ISO 4589 | ||
Vicat Softening Temperature Rate B/50 Rate B/50 Rate B/120 |
136 °C 137 °C 139 °C |
ASTM D1525 ISO 306 ISO 306 |
||
Heat Deflection Temperature[HDT], Unannealed 0.45 MPa;3.2 mm 3.2 mm;1.82 MPa |
131 °C 120 °C |
ASTM D648 | ||
CTE, Flow -40 - 40 °C 23°C to 80°C |
6.6E-05 1/°C 7.2e-05 1/°C |
ASTM E831 ISO 11359-2 |
||
CTE, XFlow -40 - 40 °C 23°C to 80°C |
7.0E-05 1/°C 7.6E-05 1/°C |
ASTM E831 ISO 11359-2 |
||
Ball Pressure Test(125°C +/- 2°C) | Pass | IEC 60695-10-2 | ||
HDT/Be(Edgew;120*10*4;sp =100mm; 0.45 Mpa) | 131 °C | ISO 75/Be | ||
Hdt/Ae(1.8 MPa;Edgew;120*10*4;sp =100mm) | 120 °C | ISO 75/Ae | ||
Relative Temp Index, Elec | 125 °C | UL 746B | ||
Relative Temp Index, Mechanical with Impact | 120 °C | UL 746B | ||
Relative Temp Index, Mechanical without Impact | 125 °C | UL 746B | ||
Electrical | Nominal Value | Test Method | ||
Dielectric Constant, Dk(1.1e+9 Hz) | 2.79 | ASTM ES 7-83 | ||
Dissipation Factor, Df(1.1e+9 Hz) | 5.8E-03 | ASTM ES 7-83 | ||
Comparative Tracking Index, CTI | PLC 3 | UL 746A | ||
Hot-wire Ignition, HWI ≥ 3 mm ≥ 1 mm |
PLC 2 PLC 3 |
UL 746A | ||
High Amp Arc Ignition, HAI( ≥ 1 mm) | PLC 0 | UL 746A | ||
Processing | Nominal Value | |||
Drying Temperature<Injection> | 120 °C | |||
Drying Time<Injection> | 3 - 4 hrs | |||
Drying Time, Cumulative<Injection> | 48 hrs | |||
Maximum Moisture Content<Injection> | 0.02 % | |||
Melt Temperature<Injection> | 290 - 310 °C | |||
Nozzle Temperature<Injection> | 280 - 305 °C | |||
Front, Zone 3 Temperature<Injection> | 290 - 310 °C | |||
Middle, Zone 2 Temperature<Injection> | 275 - 300 °C | |||
Rear, Zone 1 Temperature<Injection> | 265 - 290 °C | |||
Mold Temperature<Injection> | 70 - 95 °C | |||
Back Pressure<Injection> | 0.3 - 0.7 MPa | |||
Screw Speed <Injection> | 40 - 70 rpm | |||
Shot To Cylinder Size<Injection> | 40 - 60 % | |||
Vent Depth <Injection> | 0.025 - 0.076 mm |
Suppliers with verified business licenses