Feature: | Plastics |
---|---|
CAS No.: | 25766-59-0 |
Formula: | C6h4c(CH3)2c6h4oco2-]N |
Samples: |
BAG
|
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
PC Optimum combination of high modulus plus excellent impact strength and flame retardance
https://forever-plastics.en.made-in-china.com/product-list-1.html
Product Description | ||||||
10% GR PC. Optimum combination of high modulus plus excellent impact strength and flame retardance. UV- stabilized. Internal mold release. | ||||||
General | ||||||
Form | Resin Pellets | |||||
Filler | 10 % Glass Fiber | |||||
Feature | Outdoor | F1 | ||||
UL Yellow Card |
E121562-220888 E207780-100726439 E45329-100369982 |
|||||
Uses PV Convertor Box Energy Storage smart meter | ||||||
Physical | Nominal Value | Test Method | ||||
Density / Specific Gravity | 1.25 g/cm³ 1.245 g/cm³ |
ASTM D792 |
||||
Water Absorption(Time 24 hr) | 0.12 % | ASTM D570 | ||||
Moisture Absorption at Equilibrium | 0.31 % | ASTM D570 | ||||
Linear Mold Shrinkage, Flow(Thickness; 3.2 mm) | 0.2 - 0.4 % | |||||
Hardness, Rockwell M | 85 | ASTM D785 | ||||
Hardness, Rockwell R | 124 | ASTM D785 | ||||
UV light, water exposure/immersion | f1 | UL 746C | ||||
Mechanical | Nominal Value | Test Method | ||||
Tensile Strength, Break(5 mm/min) | 55.0 MPa | ASTM D638-1 | ||||
Tensile Strength, Yield(5 mm/min) | 66.0 MPa | ASTM D638-1 | ||||
Elongation at Break(5 mm/min) | 15 % | ASTM D638-1 | ||||
Elongation at Yield(5 mm/min) | 8.0 % | ASTM D638-1 | ||||
Flexural Yield Strength(1.3 mm/min;50 mm;span) | 103 MPa | ASTM D790 | ||||
Flexural Modulus(1.3 mm/min;50 mm;span) | 3440 MPa | ASTM D790 | ||||
Izod Impact, Notched(Temperature; 23 °C) | 106 J/m | ASTM D256 | ||||
Izod Impact, Unnotched(Temperature; 23 °C;80x10x3 mm) | 2136 J/m | ASTM D4812 | ||||
Tensile Impact Strength | 157 kJ/m² | ASTM D1822S | ||||
Dart Drop, Total Energy | 101 J | ASTM D3029 | ||||
Taber Abrasion, mg/1000 Cycles(1 kg;1.0e+3 Cycles;CS- 17 Wheel) | 11 mg | ASTM D1044 | ||||
Thermal | Nominal Value | Test Method | ||||
CTE, Flow(Temperature; -40 - 95 °C) | 32.4 µm/m-°C | ASTM E831 | ||||
Specific Heat Capacity | 1.21 J/g-°C | ASTM C351 | ||||
Thermal Conductivity | 0.200 W/m-K | ASTM C177 | ||||
Deflection Temperature Thickness; 6.4 mm;Pressure; 0.46 MPa Thickness; 6.4 mm;Pressure; 1.8 MPa |
146 °C 142 °C |
ASTM D648 | ||||
Vicat Softening Point(Rate B/50) | 154 °C | ASTM D1525 | ||||
UL RTI, Electrical | 120 °C | UL 746B | ||||
UL RTI, Mechanical with Impact | 110 °C | UL 746B | ||||
UL RTI, Mechanical without Impact | 125 °C | UL 746B | ||||
Flammability, UL94 Thickness; 1.52 mm Thickness; 2.99 mm |
V-0 5VA |
UL 94 | ||||
Oxygen Index | 36 % | ASTM D2863 | ||||
Hot Wire Ignition, HWI | 60 - 120 sec | UL 746A | ||||
Electrical | Nominal Value | Test Method | ||||
Volume Resistivity | > = 1.00e+17 ohms ·cm | ASTM D257 | ||||
Dielectric Constant Frequency; 1.0e+6 Hz Frequency; 50 - 60 Hz |
3.05 3.1 |
ASTM D150 | ||||
Dielectric Strength(Thickness; 3.2 mm;In Air) | 17.7 kV/mm | ASTM D149 | ||||
Dissipation Factor Frequency; 50 - 60 Hz Frequency; 1.0e+6 Hz |
0.00080 0.0075 |
ASTM D150 | ||||
Arc Resistance(Tungsten) | 0.00 - 60 sec | ASTM D495 | ||||
Comparative Tracking Index | 100 - 175 V | UL 746A | ||||
High Amp Arc Ignition, HAI | 60 - 120 arcs | UL 746A | ||||
High Voltage Arc-Tracking Rate, HVTR | 80.0 - 150 mm/min | UL 746A | ||||
Processing | Nominal Value | |||||
Injection Molding | ||||||
Drying Temperature | 120 °C | |||||
Drying Time | 3 - 4 hrs | |||||
Drying Time, Cumulative | 48 hrs | |||||
Maximum Moisture Content | 0.02 % | |||||
Melt Temperature | 310 - 330 °C | |||||
Nozzle Temperature | 305 - 325 °C | |||||
Front - Zone 3 Temperature | 310 - 330 °C | |||||
Middle - Zone 2 Temperature | 300 - 320 °C | |||||
Rear - Zone 1 Temperature | 290 - 310 °C | |||||
Mold Temperature | 80 - 115 °C | |||||
Back Pressure | 0.3 - 0.7 MPa | |||||
Screw Speed | 40 - 70 rpm | |||||
Shot to Cylinder Size | 40 - 60 % | |||||
Vent Depth | 0.025 - 0.076 mm |
Forever Co.,Ltd
Suppliers with verified business licenses