Feature: | Plastics |
---|---|
CAS No.: | 63440-93-7 |
Formula: | C24h24o8 |
Samples: |
25kg/bag
|
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
Product Description | ||
LNP ELCRIN WF006XiQ compound is based on Poly butylene terephthalate (PBT) resin utilizing ELCRIN iQ upcycling technology containing minimum 37% Post-Consumer Recycling (PCR) weight content and 30% glass fiber. Added features of this grade include: Excellent Strength, Stiffness and Dimensional Stability. Potential applications may include handles, connectors. |
||
General | ||
Form Resin Pellets | ||
Filler 30 % Glass Fiber | ||
Feature | Good Dimensional Pcr |
Good Hardness 37 % Pcr |
Uses | Automotive Electrical |
Connector Consumer |
Physical Nominal Value Test Method | ||
Density / Specific Gravity 1.54 ASTM D792 1.54 g/cm³ ISO 1183 |
||
Water Absorption | ||
24 hrs;23 °C 0.1 % ASTM D570 | ||
23 °C;saturated 0.09 % ISO 62-1 | ||
Mold Shrinkage, Flow(3.2 mm) 0.5 - 0.7 % SABIC Method | ||
Mold Shrinkage, XFlow(3.2 mm) 0.8 - 1 % SABIC Method | ||
Melt Flow Rate[MFR](250 °C;5 kgf) 52 g/10min ASTM D1238 | ||
Moisture Absorption(50% RH;23 °C) 0.1 % ISO 62 | ||
Melt Volume Rate, MVR(5 kg;MVR at 250 °C) 38 cm³/10 min ISO 1133 |
Mechanical | Nominal Value | Test Method |
Izod Impact, Unnotched(23 °C) | 770 J/m | ASTM D4812 |
Izod Impact, Notched | ||
23 °C | 82 J/m | ASTM D256 |
-30 °C | 83 J/m | ASTM D256 |
80*10*4;23 °C | 8 kJ/m² | ISO 180/1A |
80*10*4;-30 °C | 8 kJ/m² | ISO 180/1A |
Instrumented Dart Impact, Total Energy(23 °C) | 7 J | ASTM D3763 |
C harpy Impact, V-Notched(23 °C;Edgew;80*10*4;sp =62 mm 0) | 14 kJ/m² | ISO 179 1eA |
Tensile Stress, Yield | ||
5 mm/min;Type I | 114 MPa | ASTM D638 |
5 mm/min | 139 MPa | ISO 527 |
Tensile Stress, Break | ||
5 mm/min;Type I | 114 MPa | ASTM D638 |
5 mm/min | 139 MPa | ISO 527 |
Tensile Strain, Yield | ||
5 mm/min;Type I | 2.2 % | ASTM D638 |
5 mm/min | 1.6 % | ISO 527 |
Tensile Strain, Break | ||
5 mm/min;Type I | 2.2 % | ASTM D638 |
5 mm/min | 1.6 % | ISO 527 |
Tensile Modulus | ||
5 mm/min | 1.2E+04 MPa | ASTM D638 |
1 mm/min | 1.1E+04 MPa | ISO 527 |
Flexural Stress, Yield | ||
1.3 mm/min;50 mm;span | 210 MPa | ASTM D790 |
2 mm/min | 210 MPa | ISO 178 |
Flexural Stress, break(1.3 mm/min;50 mm;span) | 189 MPa | ASTM D790 |
Flexural Modulus | ||
1.3 mm/min;50 mm;span | 9100 MPa | ASTM D790 |
2 mm/min | 9100 MPa | ISO 178 |
Thermal | Nominal Value | Test Method |
Heat Deflection Temperature[HDT], Unannealed 3.2 mm;1.82 MPa 1.82 MPa;6.4 mm |
203 °C 207 °C |
ASTM D648 |
CTE, Flow | ||
-40 - 40 °C | 2.5e-05 1/°C | ASTM E831 |
-40 - 40 °C | 2.5e-05 1/°C | ISO 11359-2 |
CTE, XFlow | ||
-40 - 40 °C | 8.9e-05 1/°C | ASTM E831 |
-40 - 40 °C | 8.9e-05 1/°C | ISO 11359-2 |
Ball Pressure Test, Approximate Maximum | 200 °C | IEC 60695-10-2 |
HDT/Bf(0.45) | 217 °C | ISO 75/Bf |
Electrical | Nominal Value | Test Method |
Volume Resistivity | > 1E+15 ohms ·cm | ASTM D257 |
Dielectric Strength, in Air(3.2 mm) | 23 kV/mm | ASTM D149 |
Processing | Nominal Value | |
Drying Temperature<Injection> | 120 °C | |
Drying Time<Injection> | 3 - 4 hrs | |
Drying Time, Cumulative<Injection> | 12 hrs | |
Maximum Moisture Content<Injection> | 0.02 % | |
Melt Temperature<Injection> | 250 - 265 °C | |
Nozzle Temperature<Injection> | 245 - 265 °C | |
Front, Zone 3 Temperature<Injection> | 250 - 265 °C | |
Middle, Zone 2 Temperature<Injection> | 245 - 260 °C | |
Rear, Zone 1 Temperature<Injection> | 240 - 255 °C | |
Mold Temperature<Injection> | 65 - 90 °C | |
Back Pressure<Injection> | 0.3 - 0.7 MPa | |
Screw Speed <Injection> | 50 - 80 rpm | |
Shot To Cylinder Size<Injection> | 40 - 80 % | |
Vent Depth <Injection> | 0.025 - 0.038 mm |
Suppliers with verified business licenses