Feature: | Plastics |
---|---|
CAS No.: | 25766-59-0 |
Formula: | C6h4c(CH3)2c6h4oco2-]N |
Samples: |
25kg/bag
|
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
Product Description | ||||
Description Halogen Free Flame Retardant, High Impact Application IT/OA Housing and Components Electric & Electronic (Housing, Components) | ||||
General | ||||
Form | Resin Pellets | |||
Feature |
Non-Brominated & Non- High Impact Chlorinated Flame Retardant |
|||
UL Yellow Card | E67171-248605 | |||
Uses | Electrical Engineering Electrical | |||
Physical | Nominal Value | Test Method | ||
Density / Specific Gravity | 1.20 g/cm³ | ASTM D792 | ||
Melt Mass-Flow Rate, MFR(300 °C;1.2 kg) | 17 g/10min | ASTM D1238 | ||
Molding Shrinkage - Flow, Injection Molded(23 °C;3.2 mm) | 0.50 - 0.80 % | ASTM D955 | ||
Mechanical | Nominal Value | Test Method | ||
Tensile Strength, Yield, Injection molded(50 mm/min;23 °C;3.2 mm) | 62.8 MPa | ASTM D638 | ||
Tensile Elongation, Break, Injection Molded(50 mm/min;23 °C;3.2 mm) | > 100 % | ASTM D638 | ||
Flexural Modulus, Injection Molded(15 mm/min;6.4 mm;23 °C) | 2260 MPa | ASTM D790 | ||
Flexural Strength, Injection Molded(15 mm/min;6.4 mm;23 °C) | 93.2 MPa | ASTM D790 | ||
Notched Izod Impact, Injection Molded(23 °C;3.2 mm) | 690 J/m | ASTM D256 | ||
Thermal | Nominal Value | Test Method | ||
Deflection Temperature Under Load, Unannealed, Injection Molded(1.8 MPa;6.4 mm) | 113 °C | ASTM D648 | ||
RTI Elec | 80.0 °C | UL 746 | ||
RTI Imp | 80.0 °C | UL 746 | ||
RTI Str | 80.0 °C | UL 746 | ||
Flame Rating 1.5 mm 2 mm |
V-0 V-0 - 5VB |
UL 94 | ||
Processing | Nominal Value | |||
Drying Temperature<Injection> | 90 - 100 °C | |||
Drying Time<Injection> | 3.0 - 4.0 hr | |||
Suggested Max Moisture<Injection> | 0.020 % | |||
Rear Temperature<Injection> | 270 - 285 °C | |||
Middle Temperature<injection> | 275 - 290 °C | |||
Front Temperature<Injection> | 275 - 290 °C | |||
Nozzle Temperature<Injection> | 270 - 285 °C | |||
Processing Temp, Melt<Injection> | 275 - 290 °C | |||
Mold Temperature<Injection> | 80 - 100 °C | |||
Back Pressure<Injection> | 0.981 - 3.92 MPa | |||
Screw Speed <Injection> | 40 - 80 rpm |
Suppliers with verified business licenses