Feature: | Natural Color |
---|---|
CAS No.: | 9003-54-7 |
Formula: | C33h33n3X2 |
Samples: |
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
Product Description | |||
GFAS-30 is an Acrylonitrile Styrene Copolymer (AS) material filled with 30% glass fiber. It is available in Asia Pacific or North America for injection molding. Important attributes of GFAS-30 are: Flame Rated Good Dimensional Stability Low Shrinkage Warp Resistant | |||
General | |||
Form Resin Pellets | |||
Filler 30 % Glass Fiber | |||
Feature Low Warpage | Low Shrinkage | Good Dimensional | |
Physical | Nominal Value | Test Method | |
Density / Specific Gravity(23 °C) | 1.30 g/cm³ | ISO 1183 | |
Melt Mass-Flow Rate, MFR(220 °C;10 kg) | 12 g/10min | ISO 1133 | |
Molding Shrinkage(23 °C) | 0.10 - 0.30 % | ISO 2577 | |
Mechanical | Nominal Value | Test Method | |
Tensile Stress | 120 MPa | ISO 527-2/10 | |
Tensile Strain, Break | 2.0 % | ISO 527-2/10 | |
Flexural Modulus(2 mm/min) | 10000 MPa | ISO 178 | |
Flexural Stress(2 mm/min) | 180 MPa | ISO 178 | |
Notched Izod Impact Strength(23 °C) | 7.0 kJ/m² | ISO 180 | |
Thermal | Nominal Value | Test Method | |
Heat Deflection Temperature, Unannealed(1.8 MPa) | 104 °C | ISO 75-2/A | |
Vicat Softening Temperature | 114 °C | ISO 306/B120 | |
Flame Rating | UL 94 | ||
1.6 mm | HB | ||
3.2 mm | HB | ||
Electrical | Nominal Value | Test Method | |
Volume Resistivity | 1.0E+16 ohms ·cm | IEC 60093 | |
Electric Strength, in Oil(2 mm) | 23 kV/mm | IEC 60243-1 | |
Processing | Nominal Value | ||
Drying Temperature<Injection> | 80 - 90 °C | ||
Drying Time<Injection> | 2.0 - 4.0 hr | ||
Rear Temperature<Injection> | 190 - 215 °C | ||
Middle Temperature<injection> | 210 - 250 °C | ||
Front Temperature<Injection> | 220 - 260 °C | ||
Processing Temp, Melt<Injection> | 210 - 250 °C | ||
Mold Temperature<Injection> | 40 - 90 °C | ||
Injection Rate<Injection> | Slow-Moderate | ||
Back Pressure<Injection> | 0.00 - 1.00 MPa |
Suppliers with verified business licenses