Product Description |
Starflam PK0032E is a Halogen Free Red Phosphorous Free Flame Retardant Mineral Filled Polyamide 6 Injection Molding Resin |
General |
Form Resin Pellets |
Filler Mineral |
|
Feature Chlorinated Flame |
Retardant |
Physical Nominal Value Test Method |
Density / Specific Gravity 1.29 g/cm³ ISO 1183 |
Molding Shrinkage, Flow(4 mm) 0.80 % Internal Method |
Water Absorption(24 hr;23 °C) 1.6 % ISO 62 |
Mechanical Nominal Value Test Method |
Tensile Modulus 4700 MPa ISO 527-2/1 |
Tensile Stress, Yield 67.0 MPa ISO 527-2/5 |
Tensile Stress, Break 67.0 MPa ISO 527-2/5 |
Tensile Elongation, Yield(5 mm/min) 2.9 % ASTM D638 |
Tensile Elongation, Break 3.2 % ISO 527-2/5 |
Flexural Modulus(2 mm/min) 4100 MPa ISO 178 |
Flexural Stress, at Break(2 mm/min) 101 MPa ISO 178 |
Flexural Stress, at Yield(2 mm/min) 107 MPa ISO 178 |
Flexural strain at break(2 mm/min) 6.6 % ISO 178 |
Notched Izod Impact Strength(23 °C) 4.0 kJ/m² ISO 180/1A |
Unnotched Izod Impact Strength(23 °C) 30 kJ/m² ISO 180/1U |
Thermal Nominal Value Test Method |
Heat Deflection Temperature, Unannealed |
0.45 MPa;64 mm;Span;80x10x4 mm 190 °C ISO 75-2/Bf |
1.8 MPa;64 mm;Span;80x10x4 mm 73.0 °C ISO 75-2/Af |
Flame Rating(1.6 mm;E2P Measurement) V-2 UL 94 |
Processing |
Nominal Value |
Drying Temperature<Injection> |
80 °C |
Drying Time<Injection> |
4.0 hr |
Suggested Max Moisture<Injection> |
0.20 % |
Rear Temperature<Injection> |
240 - 250 °C |
Middle Temperature<injection> |
250 - 260 °C |
Front Temperature<Injection> |
250 - 270 °C |
Processing Temp, Melt<Injection> |
250 - 270 °C |
Mold Temperature<Injection> |
50 - 90 °C |