Feature: | Oxidative Degradable |
---|---|
CAS No.: | 32131-17-2 |
Formula: | (C12h22n2o2)N |
Samples: |
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
PA66resin containing 30% glass bead15% PTFE Low Extractable Healthcare Wear Resis
https://forever-plastics.en.made-in-china.com/product/rJwRvlcdZpWD/China-Nylon-PA6-GF33-PA66-Granules-PA6-with-30GF-Polyamide-PA66-30-GF-PA6-Material.html Heat-conducting nylon
Product Description | ||||||
LNP LUBRICOMP RBL36XXJ compound is based on Nylon 6/6 resin containing 30% glass bead, 15% PTFE. Added features of this grade include: Low Extractable, Healthcare, Wear Resistant, Food Contact compliant. | ||||||
General | ||||||
Form | Resin Pellets | |||||
Filler 30 % Glass Bead 15 % PTFE | ||||||
Feature | Low Warpage Abrasion Resistant |
Fda Low Extractables |
Good Dimensional Internally Lubricated |
|||
Uses | Consumer Healthcare Building and Construction |
Packaging | ||||
Physical Nominal Value Test Method | ||||||
Density / Specific Gravity 1.49 ASTM D792 1.49 g/cm³ ISO 1183 |
||||||
Moisture Absorption | ||||||
23 °C;50% RH/24 hrs 0.41 % ASTM D570 | ||||||
50% RH;23 °C 0.58 % ISO 62 | ||||||
Mold Shrinkage, Flow(24 hrs) 2 - 4 % ASTM D955 | ||||||
Mold Shrinkage, XFlow(24 hrs) 1 - 3 % ASTM D955 | ||||||
Wear Factor Washer 41 10^-10 in^5-min/ft-lb-hr | ASTM D3702 Modified: Manual |
|||||
Wear Factor, Ring 8 10^-10 in^5-min/ft-lb-hr | ASTM D3702 Modified: Manual |
|||||
Dynamic Cof 0.47 | ASTM D3702 Modified: Manual |
|||||
Static Cof 0.44 | ASTM D3702 Modified: Manual |
|||||
Mechanical | Nominal Value | Test Method | ||||
Izod Impact, Unnotched | ||||||
23 °C | 435 J/m | ASTM D4812 | ||||
80*10*4;23 °C | 27 kJ/m² | ISO 180/1U | ||||
Izod Impact, Notched | ||||||
23 °C | 51 J/m | ASTM D256 | ||||
80*10*4;23 °C | 5 kJ/m² | ISO 180/1A | ||||
Multiaxial Impact | 1 J | ISO 6603 | ||||
Instrumented Dart Impact, Total Energy(23 °C) | 5 J | ASTM D3763 | ||||
Tensile Stress, Break | ||||||
5 mm/min;Type I | 64 MPa | ASTM D638 | ||||
5 mm/min | 64 MPa | ISO 527 | ||||
Tensile Strain, Yield(5 mm/min;Type I) | 8.5 % | ASTM D638 | ||||
Tensile Strain, Break | ||||||
5 mm/min;Type I | 10 % | ASTM D638 | ||||
5 mm/min | 8.3 % | ISO 527 | ||||
Tensile Modulus | ||||||
5 mm/min | 3990 MPa | ASTM D638 | ||||
1 mm/min | 3930 MPa | ISO 527 | ||||
Flexural Modulus | ||||||
1.3 mm/min;50 mm;span | 3740 MPa | ASTM D790 | ||||
2 mm/min | 3560 MPa | ISO 178 | ||||
Flexural Stress | 107 MPa | ISO 178 | ||||
Thermal | Nominal Value | Test Method | ||||
Heat Deflection Temperature[HDT], Unannealed 0.45 MPa;3.2 mm 3.2 mm;1.82 MPa |
236 °C 83 °C |
ASTM D648 | ||||
CTE, Flow(-30 - 30 °C) | 6.9e-05 1/°C | ASTM D696 | ||||
CTE, XFlow(-30 - 30 °C) | 8.3E-05 1/°C | ASTM D696 | ||||
HDT/Bf(0.45) | 203 °C | ISO 75/Bf | ||||
HDT/Af(1.8) | 73 °C | ISO 75/Af | ||||
Processing | Nominal Value | |||||
Drying Temperature<Injection> | 80 °C | |||||
Drying Time<Injection> | 4 hrs | |||||
Maximum Moisture Content<Injection> | 0.15 - 0.25 % | |||||
Melt Temperature<Injection> | 280 - 305 °C | |||||
Front, Zone 3 Temperature<Injection> | 295 - 305 °C | |||||
Middle, Zone 2 Temperature<Injection> | 280 - 295 °C | |||||
Rear, Zone 1 Temperature<Injection> | 265 - 275 °C | |||||
Mold Temperature<Injection> | 95 - 110 °C | |||||
Back Pressure<Injection> | 0.2 - 0.3 MPa | |||||
Screw Speed <Injection> | 30 - 60 rpm |
Forever Co.,Ltd
Suppliers with verified business licenses