Feature: | Plastics |
---|---|
CAS No.: | 63440-93-7 |
Formula: | C24h24o8 |
Samples: |
25kg/bag
|
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
Product Description | ||||
Description Heat resistance, High Flow, High Impact. Application Automotive (Interior), E&E(housing) | ||||
General | ||||
Form | Resin Pellets | |||
Feature | Good Thermal | Excellent Processability High Impact | ||
UL Yellow Card E67171-100093014 | ||||
Uses | Automotive Housing |
Automotive Exterior Electrical | Automotive Interior | |
Physical Nominal Value | Test Method | |||
Density / Specific Gravity 1.14 g/cm³ | ASTM D792 | |||
Melt Mass-Flow Rate, MFR(250 °C;2.16 kg) 5.3 g/10min | ASTM D1238 | |||
Molding Shrinkage - Flow, Injection Molded(23 °C;3.2 mm) | 0.50 - 0.80 % | ASTM D955 | ||
Mechanical Nominal Value | Test Method | |||
Tensile Strength, Yield, Injection molded(50 mm/min;23 56.9 MPa °C;3.2 mm) | ASTM D638 | |||
Tensile Elongation, Break, Injection Molded(50 mm/min;23 °C;3.2 mm) | > 100 % | ASTM D638 | ||
Flexural Modulus, Injection Molded(10 mm/min;23 °C;3.22110 MPa mm) | ASTM D790 | |||
Flexural Strength, Injection Molded(10 mm/min;23 °C;3.277.5 MPa mm;Span) | ASTM D790 | |||
Notched Izod Impact, Injection Molded -30 °C;3.2 mm 23 °C;3.2 mm |
490 J/m 640 J/m |
ASTM D256 | ||
Thermal Nominal Value | Test Method | |||
Deflection Temperature Under Load, Unannealed, Injection Molded(1.8 MPa;6.4 mm) | 113 °C | ASTM D648 | ||
RTI Elec 60.0 °C | UL 746 | |||
RTI Imp 60.0 °C | UL 746 | |||
RTI Str 60.0 °C | UL 746 | |||
Flame Rating 1.6 mm 3 mm |
HB HB |
UL 94 |
Suppliers with verified business licenses