Feature: | Plastics |
---|---|
CAS No.: | 25766-59-0 |
Formula: | C6h4c(CH3)2c6h4oco2-]N |
Samples: |
25kg/bag
|
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
Product Description | ||||||||
LEXAN 923X is based on Polycarbonate (PC) siloxane copolymer resin and is a UV stabilized high flow opaque injection molding (IM) grade. This non-chlorinated, non-brominated flame retardant grade has UL-94 V0 @ 1.5mm flame rating, extreme low temperature ductility (-40°C) characteristics and excellent processability, providing opportunities for shorter IM cycle times compared to standard PC. LEXAN 923X resin is available in a wide range of opaque colours and targeted for a wide range of applications. |
||||||||
General | ||||||||
Form | Resin Pellets | |||||||
Feature |
Non-Brominated High Impact |
Non-Chlorinated Low Temperature Impact |
Non-Brominated & Non- Chlorinated Flame Retardant |
|||||
UL Yellow Card | E207780-101158295 | |||||||
Optical Applications Computer Components Seats | ||||||||
Uses |
Transportation Wire Insulation | Aerospace Rail |
Cell Phone Cases Electrical |
|||||
Medical Decorative Parts Automotive | ||||||||
nergy orage | ||||||||
Physical Nominal Value Test Method | ||||||||
Density / Specific Gravity 1.19 g/cm³ | ASTM D792;ISO 1183 | |||||||
Melt Mass-Flow Rate, MFR(300 °C;1.2 kg) 16 g/10min ASTM D1238 | ||||||||
Melt Volume-Flow Rate, MVR(300 °C;1.2 kg) 15 cm³/10 min ISO 1133 | ||||||||
Molding Shrinkage, Flow(3.2 mm) 0.40 - 0.80 % Internal Method | ||||||||
Water Absorption, Saturation(23 °C) 0.40 % ISO 62 | ||||||||
Water Absorption, Equilibrium(50% RH;23 °C) 0.15 % ISO 62 | ||||||||
Mechanical Nominal Value Test Method | ||||||||
Tensile Modulus | ||||||||
5 mm/min 2100 MPa ASTM D638 | ||||||||
2000 MPa ISO 527-1/1 | ||||||||
Tensile Strength, Yield | ||||||||
50 mm/min;Type I 58.0 MPa ASTM D638 | ||||||||
56.0 MPa ISO 527-2/50 | ||||||||
Tensile Strength, Break 50 mm/min;Type I |
60.0 MPa 57.0 MPa |
ASTM D638 ISO 527-2/50 |
||||||
Tensile Elongation, Yield 50 mm/min;Type I |
6.0 % 6.0 % |
ASTM D638 ISO 527-2/50 |
||||||
Tensile Elongation, Break 50 mm/min;Type I |
110 % 110 % |
ASTM D638 ISO 527-2/50 |
||||||
Flexural Modulus 1.3 mm/min;50 mm;Span 2 mm/min |
2400 MPa 2100 MPa |
ASTM D790 ISO 178 |
||||||
Flexural Strength 1.3 mm/min;50 mm;Span 2 mm/min |
90.0 MPa 87.0 MPa |
ASTM D790 ISO 178 |
||||||
C harpy Notched Impact Strength -30 °C;80 23 °C;80 |
35 kJ/m² 70 kJ/m² |
ISO 179/1eA | ||||||
C harpy Unnotched Impact Strength -30 °C;80 23 °C;80 |
No Break No Break |
ISO 179/1eU | ||||||
Notched Izod Impact -30 °C 23 °C -30 °C;80*10*3 mm 23 °C;80*10*3 mm |
650 J/m 780 J/m 30 kJ/m² 65 kJ/m² |
ASTM D256 ASTM D256 ISO 180/1A ISO 180/1A |
||||||
Unnotched Izod Impact Strength -30 °C;80*10*3 mm 23 °C;80*10*3 mm |
No Break No Break |
ISO 180/1U | ||||||
Instrumented Dart Impact, Total Energy(23 °C) | 65.0 J | ASTM D3763 | ||||||
Thermal | Nominal Value | Test Method | ||||||
Deflection Temperature Under Load, Unannealed 1.8 MPa;3.2 mm 80*10*4 mm;1.8 MPa;4 mm;64 mm;Span |
123 °C 118 °C |
ASTM D648 ISO 75-2/Af |
||||||
Vicat Softening Temperature 50 °C/h;50 N;Rate A;Loading 2 |
140 °C 141 °C 139 °C |
ASTM D1525 ISO 306/B120 ISO 306/B50 |
||||||
CLTE, Flow(-40 - 40 °C) | 6.1E-5 cm/cm/°C | ASTM E831;ISO 11359-2 | ||||||
CLTE, Transverse(-40 - 40 °C) | 6.2E-5 cm/cm/°C | ASTM E831;ISO 11359-2 | ||||||
RTI Elec | 125 °C | UL 746B | ||||||
RTI Imp | 115 °C | UL 746B | ||||||
RTI Str | 120 °C | UL 746B | ||||||
Flame Rating > 1.5 mm > 3 mm |
V-0 5VA |
UL 94 | ||||||
Glow Wire Flammability Index 1.5 mm 3 mm |
960 °C 960 °C |
IEC 60695-2-12 | ||||||
Glow Wire Ignition Temperature [GWIT] 1.5 mm 3 mm |
825 °C 825 °C |
IEC 60695-2-13 | ||||||
Electrical | Nominal Value | Test Method | ||||||
Comparative Tracking Index, CTI | PLC 3 | UL 746A | ||||||
Comparative Tracking Index | 150 V | IEC 60112 | ||||||
High Amp Arc Ignition, HAI > 1.5 mm > 3 mm |
PLC 1 PLC 0 |
UL 746A | ||||||
Hot-wire Ignition, HWI > 1.5 mm > 3 mm |
PLC 3 PLC 2 |
UL 746A | ||||||
Processing | Nominal Value | |||||||
Drying Temperature<Injection> | 120 °C | |||||||
Drying Time<Injection> | 3.0 - 4.0 hr | |||||||
Suggested Max Moisture<Injection> | 0.020 % | |||||||
Rear Temperature<Injection> | 270 - 295 °C | |||||||
Middle Temperature<injection> | 280 - 305 °C | |||||||
Front Temperature<Injection> | 295 - 315 °C | |||||||
Nozzle Temperature<Injection> | 290 - 310 °C | |||||||
Processing Temp, Melt<Injection> | 295 - 315 °C | |||||||
Mold Temperature<Injection> | 70 - 95 °C | |||||||
Back Pressure<Injection> | 0.300 - 0.700 MPa | |||||||
Screw Speed <Injection> | 40 - 70 rpm | |||||||
Drying Time, Cumulative<Injection> | 48 hr |
Suppliers with verified business licenses