Feature: | Plastics |
---|---|
CAS No.: | 9003-56-9 |
Formula: | C45h51n3X2 |
Samples: |
25kg/bag
|
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
Product Description | ||||||
Features: High impact resistance; Rigidity and gloss; Special for electroplating Applications: Decorative accessories; Audio equipment panels; Hubcaps; Toiletries; | ||||||
General | ||||||
Form | Resin Pellets | |||||
Feature | High Mechanical Strength And Rigidity | Good Platable High Reflection |
High Impact | |||
UL Yellow Card E56070-245712 | ||||||
Uses | Trim | Audio Speaker Components |
||||
Physical | Nominal Value | Test Method | ||||
Density / Specific Gravity(23 °C) | 1.05 g/cm³ | ISO 1183 | ||||
Melt Volume-Flow Rate, MVR(220 °C;10 kg) | 19 cm³/10 min | ISO 1133 | ||||
Molding Shrinkage | 0.40 - 0.70 % | ISO 294-4 | ||||
Mechanical | Nominal Value | Test Method | ||||
Tensile Strength, Yield(50 mm/min) | 46.0 MPa | ISO 527-2/50 | ||||
Tensile Strength, Break(50 mm/min) | 34.0 MPa | ISO 527-2/50 | ||||
Tensile Elongation, Break(50 mm/min) | 80 % | ISO 527-2/50 | ||||
Flexural Modulus(2 mm/min) | 2000 MPa | ISO 178 | ||||
Flexural Strength(2 mm/min) | 71.0 MPa | ISO 178 | ||||
Charpy Notched Impact Strength -30 °C 23 °C |
12 kJ/m² 25 kJ/m² |
ISO 179 | ||||
Notched Izod Impact -30 °C 23 °C |
11 kJ/m² 24 kJ/m² |
ISO 180/1A |
Thermal | Nominal Value | Test Method |
Deflection Temperature Under Load, Unannealed(1.8 MPa) | 83.0 °C | ISO 75-2/A |
Deflection Temperature Under Load, Annealed(1.8 MPa) | 100 °C | ISO 75-2/A |
Vicat Softening Temperature | ||
5 kg;50 ºC/hr | 98.0 °C | ISO 306/B50 |
50 ºC/hr;1 kg | 105 °C | ISO 306/A50 |
CLTE, Flow | 8.8E-5 cm/cm/°C | ISO 11359-2 |
Flame Rating(1.5 mm) | HB | UL 94 |
Processing | Nominal Value | |
Drying Temperature<Injection> | 80 - 85 °C | |
Drying Time<Injection> | 3.0 - 4.0 hr | |
Rear Temperature<Injection> | 180 - 220 °C | |
Middle Temperature<injection> | 190 - 230 °C | |
Front Temperature<Injection> | 190 - 230 °C | |
Mold Temperature<Injection> | 30 - 70 °C |
Suppliers with verified business licenses