Number of Charging Interfaces: | One Pile with Multiple Charges |
---|---|
Location: | Private Use |
Installation: | Floor Type |
Samples: |
customize according to your exact requirements
|
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
Tensile Stress, brk, Type I, 50 mm/min | 65 | MPa | ASTM D 638 |
Tensile Strain, yld, Type I, 50 mm/min | 7 | % | ASTM D 638 |
Tensile Strain, brk, Type I, 50 mm/min | 110 | % | ASTM D 638 |
Flexural Stress, yld, 1.3 mm/min, 50 mm span | 93 | MPa | ASTM D 790 |
Flexural Modulus, 1.3 mm/min, 50 mm span | 2340 | MPa | ASTM D 790 |
Hardness, Rockwell M | 70 | - | ASTM D 785 |
Hardness, Rockwell R | 118 | - | ASTM D 785 |
Taber Abrasion, CS-17, 1 kg IMPACT |
10 | mg/1000cy | ASTM D 1044 |
Izod Impact, unnotched, 23°C | 3200 | J/m | ASTM D 4812 |
Izod Impact, notched, 23°C | 600 | J/m | ASTM D 256 |
Tensile Impact Strength, Type S | 546 | kJ/m² | ASTM D 1822 |
Falling Dart Impact (D 3029), 23°C | 169 | J | ASTM D 3029 |
Izod Impact, unnotched 80*10*3 +23°C | NB | kJ/m² | ISO 180/1U |
Izod Impact, unnotched 80*10*3 -30°C | NB | kJ/m² | ISO 180/1U |
Izod Impact, notched 80*10*3 +23°C | 65 | kJ/m² | ISO 180/1A |
Izod Impact, notched 80*10*3 -30°C | 11 | kJ/m² | ISO 180/1A |
Charpy 23°C, V-notch Edgew 80*10*3 sp=62mm | 65 | kJ/m² | ISO 179/1eA |
Charpy -30°C, V-notch Edgew 80*10*3 sp=62mm | 12 | kJ/m² | ISO 179/1eA |
Charpy 23°C, Unnotch Edgew 80*10*3 sp=62mm | NB | kJ/m² | ISO 179/1eU |
Charpy -30°C, Unnotch Edgew 80*10*3 sp=62mm THERMAL |
NB | kJ/m² | ISO 179/1eU |
Vicat Softening Temp, Rate B/50 | 154 | °C | ASTM D 1525 |
HDT, 0.45 MPa, 6.4 mm, unannealed | 137 | °C | ASTM D 648 |
HDT, 1.82 MPa, 6.4 mm, unannealed | 132 | °C | ASTM D 648 |
CTE, -40°C to 95°C, flow | 6.84E-05 | 1/°C | ASTM E 831 |
Specific Heat | 1.26 | J/g-°C | ASTM C 351 |
Thermal Conductivity | 0.25 | W/m-°C | ASTM C177 |
Ball Pressure Test, 125°C +/- 2°C | PASSES | - | IEC 60695-10-2 |
Relative Temp Index, Elec | 80 | °C | UL 746B |
Relative Temp Index, Mech w/impact | 80 | °C | UL 746B |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
Specific Volume | 0.83 | cm³/g | ASTM D 792 |
Density | 1.19 | g/cm³ | ASTM D 792 |
Water Absorption, 24 hours | 0.15 | % | ASTM D 570 |
Water Absorption, equilibrium, 23C | 0.35 | % | ASTM D 570 |
Water Absorption, equilibrium, 100°C | 0.58 | % | ASTM D 570 |
Mold Shrinkage, flow, 3.2 mm | 0.5 - 0.7 | % | SABIC method |
Melt Flow Rate, 300°C/1.2 kgf OPTICAL |
17.5 | g/10 min | ASTM D 1238 |
Refractive Index | 1.586 | - | ASTM D542 |
ELECTRICAL | |||
Volume Resistivity | >1.E+17 | Ohm-cm | ASTM D 257 |
Dielectric Strength, in air, 3.2 mm | 15 | kV/mm | ASTM D 149 |
Relative Permittivity, 50/60 Hz | 3.17 | - | ASTM D 150 |
Relative Permittivity, 1 MHz | 2.96 | - | ASTM D 150 |
Dissipation Factor, 50/60 Hz | 0.0009 | - | ASTM D 150 |
Dissipation Factor, 1 MHz | 0.01 | - | ASTM D 150 |
Hot Wire Ignition {PLC) | 3 | PLC Code | UL 746A |
High Ampere Arc Ign, surface {PLC} | 1 | PLC Code | UL 746A |
Comparative Tracking Index (UL) {PLC} | 3 | PLC Code | UL 746A |
FLAME CHARACTERISTICS | |||
UL Recognized, 94V-2 Flame Class Rating | 0.75 - 1.65 | mm | UL 94 |
Glow Wire Flammability Index 750°C, passes at | 0.75 | mm | IEC 60695-2-12 |
Glow Wire Flammability Index 850°C, passes at | 1.5 | mm | IEC 60695-2-12 |
Glow Wire Ignitability Temperature, 0.75 mm, by VDE | 875 | °C | IEC 60695-2-13 |
Glow Wire Ignitability Temperature, 1.5 mm | 850 | °C | IEC 60695-2-13 |
UV-light, water exposure/immersion | F2 | - | UL 746C |
INJECTION MOLDING | |||
Drying Temperature | 120 | °C | |
Drying Time | 3 - 4 | hrs | |
Drying Time (Cumulative) | 48 | hrs | |
Maximum Moisture Content | 0.02 | % | |
Melt Temperature | 280 - 305 | °C | |
Nozzle Temperature | 275 - 300 | °C | |
Front - Zone 3 Temperature | 280 - 305 | °C | |
Middle - Zone 2 Temperature | 270 - 295 | °C | |
Rear - Zone 1 Temperature | 260 - 280 | °C | |
Mold Temperature | 70 - 95 | °C | |
Back Pressure | 0.3 - 0.7 | MPa | |
Screw Speed | 40 - 70 | rpm | |
Shot to Cylinder Size | 40 - 60 | % |
Vent Depth
DISCLAIMER
Any sale by SABIC, its subsidiaries and affiliates (each a "seller"), is made exclusively under seller's standard conditions of sale (available upon request) unless agreed
otherwise in writing and signed on behalf of the seller. While the information contained herein is given in good faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE
PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each customer must determine the suitability of seller materials for the customer's particular use through appropriate testing and analysis. No statement by seller concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.
Dongguan Forever Co.,Ltd has produced the polycarbonate for EV charging pile with the feature below
1 Strong weather resistance
withstand the adverse effects of sunlight, rain, temperature changes and other environmental factors,
maintaining the optical performance and appearance of the lens.
2 Strong UV resistance
effectively prevent damage from ultraviolet radiation and extend the product's service life.
3 High light transmittance:
transmit LED brightness as much as possible, ensuring uniformity and color consistency of the light.
4 High temperature resistance
maintain stable physical and optical properties in high-temperature environments, avoiding lens melting or softening due to excessive heat.
5 Chemical corrosion resistance
resist the erosion of acids, alkalis, oils, and other chemical substances, ensuring cleanliness and transparency of the lens.
Thanks our pioneers as below
Sabic Innovative Plastics Lexan 943A, LUX2180T
Covestr (Former Bayer MaterialScience)Makrolon® LED2245,Makrolon® TC8030
Mitsubishi Chemical: Iupilon®/Novarex® Iupilon® S2000-30L
Teijin Chemicals Panlite® L-1250Z100
Idemistsu TARFLON™ LC1700
Suppliers with verified business licenses