Feature: | Oxidative Degradable |
---|---|
CAS No.: | 32131-17-2 |
Formula: | (C12h22n2o2)N |
Samples: |
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
PA6 UL94 V-0 classified free of halogens-based flame retardants and red phosphoroushttps://forever-plastics.en.made-in-china.com/product/rJwRvlcdZpWD/China-Nylon-PA6-GF33-PA66-Granules-PA6-with-30GF-Polyamide-PA66-30-GF-PA6-Material.html
Product Description | |||||||
High thermal conductivity product based on Polyamide 6 (PA6). Glass fibres / Mineral filler. UL94 V-0 classified, free of halogens-based flame retardants and red phosphorous. | |||||||
General | |||||||
Form | Resin Pellets | ||||||
Filler | Glass Fiber/Mineral | ||||||
Feature |
Thermally Conductive | Red Phosphorous Free | Non-Brominated & Non- Chlorinated Flame | ||||
Physical | Nominal Value | Test Method | |||||
Density / Specific Gravity | 1.75 g/cm³ | ||||||
Molding Shrinkage, Across | Flow(2 mm;60 MPa) | 0.50 - 0.65 % | |||||
Molding Shrinkage, Flow(2 | mm;60 MPa) | 0.30 - 0.45 % | |||||
Mechanical | Nominal Value | Test Method | |||||
Tensile Modulus 23 °C 60 °C 90 °C 120 °C 150 °C |
10500 MPa 6500 MPa 4700 MPa 3500 MPa 2800 MPa |
ISO 527-1/2 | |||||
Tensile Stress, Break 23 °C 60 °C 90 °C 120 °C 150 °C |
85.0 MPa 65.0 MPa 55.0 MPa 45.0 MPa 35.0 MPa |
ISO 527-2/5 | |||||
Elongation at Break 23 °C 60 °C 90 °C 120 °C 150 °C |
1.5 % 1.8 % 2.0 % 2.5 % 2.5 % |
ISO 527-2/5 | |||||
C harpy Notched Impact Strength -20 °C 23 °C |
3.5 kJ/m² 3.5 kJ/m² |
ISO 179 1eA | |||||
C harpy Unnotched Impact Strength -20 °C 23 °C |
15 kJ/m² 15 kJ/m² |
ISO 179 1eU | |||||
Thermal | Nominal Value | Test Method | |||||
Heat Deflection Temperature | |||||||
0.45 MPa | 215 °C | ||||||
1.8 MPa | 200 °C | ||||||
Continuous Use Temperature(2.0e+4 hr) | 135 °C | ||||||
Vicat Softening Temperature | 210 °C | ISO 306/B50 | |||||
CTE, Flow(30 - 100 °C) | 1.5E-5 cm/cm/°C | ||||||
Thermal Conductivity, Through Plane(Longitudinal) | 1.1 W/m-K | Internal Method | |||||
Flame Rating | |||||||
0.75 mm | V-1 | ||||||
1.5 mm | V-0 | ||||||
3 mm | V-0 | ||||||
Glow Wire Flammability Index | |||||||
1 mm | 960 °C | ||||||
2 mm | 960 °C | ||||||
Glow Wire Test(1 mm) | 775 °C | ||||||
Oxygen Index | 42 % | ASTM D2863 | |||||
Electrical | Nominal Value | Test Method | |||||
Surface Resistivity | 1.0E+10 ohms | ASTM D257 | |||||
Processing | Nominal Value | ||||||
Melt Temperature | 250 - 270 °C | ||||||
Mold Temperature | 80.0 - 100 °C | ||||||
Drying Temperature | 90.0 - 100 °C | ||||||
Dry Time | 3 hr |
Forever Co.,Ltd