| CAS No.: | 9002-98-6 |
|---|---|
| Formula: | C39h30n2o6 |
| EINECS: | 205-793-9 |
| Samples: |
BAG
|
|---|
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier | Product Description | |||
| 40% Glass fiber filled, enhanced flow Polyetherimide (Tg 217C). ECO Conforming, UL94 V0 and 5VA listing. | |||
| General | |||
| Form | Resin Pellets | ||
| Filler | 40 % Glass Fiber | ||
Feature |
Easy Release Good Dimensional Hydrolysis Resistance Low Smoke |
Low Shrinkage Good Thermal Amorphous Low Creep Sensitivity |
Chemical Resistant Good Hardness Good Mechanicals Good Metal Adhesion |
| UL Yellow Card | E45587-236986 | ||
| Uses | Automotive Electrical |
Consumer Mass Transportation |
Industria Hydrocarbon and Energy |
| Physical | Nominal Value | Test Method | |
| Density / Specific Gravity | 1.61 | ASTM D792 | |
| Water Absorption | ASTM D570 | ||
| 24 hrs;23 °C | 0.13 % | ||
| 23°C/Saturated | 0.9 % | ||
| Mold Shrinkage, Flow(3.2 mm) | 0.1 - 0.3 % | Method | |
| Melt Flow Rate[MFR](337 °C;6.6 kgf) | 5.2 g/10min | ASTM D1238 | |
| Hardness, Rockwell M | 114 | ASTM D785 | |
| Mechanical | Nominal Value | Test Method | |
| Izod Impact, Unnotched(23 °C) | 427 J/m | ASTM D4812 | |
| Izod Impact, Notched(23 °C) | 112 J/m | ASTM D256 | |
| Tensile Stress, Yield(5 mm/min;Type I) | 186 MPa | ASTM D638 | |
| Tensile Stress, Break(5 mm/min;Type I) | 179 MPa | ASTM D638 | |
| Tensile Strain, Break(5 mm/min;Type I) | 2.5 % | ASTM D638 | |
| Tensile Modulus(5 mm/min) | 1.2E+04 MPa | ASTM D638 | |
| Flexural Stress, break(2.6 mm/min;100 mm;Span) | 241 MPa | ASTM D790 | |
| Flexural Modulus(2.6 mm/min;100 mm;Span) | 1.2E+04 MPa | ASTM D790 | |
| Thermal | Nominal Value | Test Method | |
| UL Recognized ≥ 1.5 mm ≥ 0.25 mm |
5VA V-0 |
UL 94 | |
| Oxygen Index | 54 % | ASTM D2863 | |
| NBS Smoke Density, Flaming(Ds 4 min) | 1 | ASTM E662 | |
| Vicat Softening Temperature(Rate B/50) | 234 °C | ASTM D1525 | |
| Heat Deflection Temperature[HDT], Unannealed 0.45 MPa;6.4 mm 1.82 MPa;6.4 mm |
215 °C 212 °C |
ASTM D648 | |
| CTE, Flow -20°C to 150°C -20°C to 150°C |
1.4e-05 1/°C 1.4e-05 1/°C |
ASTM E831 ISO 11359-2 |
|
| CTE, XFlow(-20°C to 150°C) | 4.5e-05 1/°C | ISO 11359-2 | |
| Relative Temp Index, Elec | 105 °C | UL 746B | |
| Relative Temp Index, Mechanical with Impact | 105 °C | UL 746B | |
| Relative Temp Index, Mechanical without Impact | 105 °C | UL 746B | |
| Electrical | Nominal Value | Test Method | |
| Volume Resistivity | 1.5E+16 ohms ·cm | ASTM D257 | |
| Dielectric Strength, in Oil(1.6 mm) | 24 kV/mm | ASTM D149 | |
| Relative Permittivity(1.0e+3 Hz) | 3.7 | ASTM D150 | |
| Dissipation Factor(1.0e+3 Hz) | 2.0E-03 | ASTM D150 | |
| Comparative Tracking Index, CTI | PLC4 | UL 746A | |
| Hot-wire Ignition, HWI( ≥ 1.5 mm) | PLC 0 | UL 746A | |
| High Amp Arc Ignition, HAI( ≥ 1.5 mm) | PLC4 | UL 746A | |
| High Voltage Arc Tracking Rate, HVTR | PLC4 | UL 746A | |
| Arc Resistance, Tungsten Electrode | PLC5 | ASTM D495 | |
| Processing | Nominal Value | ||
| Drying Temperature<Injection> | 150 °C | ||
| Drying Time<Injection> | 4 - 6 hrs | ||
| Drying Time, Cumulative<Injection> | 24 hrs | ||
| Maximum Moisture Content<Injection> | 0.02 % | ||
| Melt Temperature<Injection> | 350 - 400 °C | ||
| Nozzle Temperature<Injection> | 345 - 400 °C | ||
| Front, Zone 3 Temperature<Injection> | 345 - 400 °C | ||
| Middle, Zone 2 Temperature<Injection> | 340 - 400 °C | ||
| Rear, Zone 1 Temperature<Injection> | 330 - 400 °C | ||
| Mold Temperature<Injection> | 135 - 165 °C | ||
| Back Pressure<Injection> | 0.3 - 0.7 MPa | ||
| Screw Speed <Injection> | 40 - 70 rpm | ||
| Shot To Cylinder Size<Injection> | 40 - 60 % | ||
| Vent Depth <Injection> | 0.025 - 0.076 mm | ||
Dongguan FOREVER Co., Ltd. Was founded in 2005 and is a national high-tech enterprise and national-level specialized giant enterprise dedicated to the research and production of polymer composite modified materials. With an annual capacity of 100, 000 tons of modified engineering plastics. Since its establishment, the company has been committed to the research of high-performance composite materials such as modified PC, PC/ABS, PBT, PA6, etc. Its products have been widely used in industries such as LED lighting, consumer electronics, new energy, security equipment, and small household appliances, providing customers with efficient delivery experience, ultimate price advantages, and strict quality assurance, contributing to the creation of a green and environmentally friendly world.
Dongguan FOREVER Co., Ltd's main products has obtained UL certification for RTI authorized temperature, outdoor weather resistance F1 and 5VA flame retardancy grades, as well as recycled-certified post-consumer low-carbon circulation products. Dongguan FOREVER Co., Ltd's products are highly recognized by customers worldwide for their reliable quality, excellent performance, and superior cost-effectiveness.
With a strong focus on research and development, Dongguan FOREVER Co., Ltd. Has established an advanced technology research and development center, equipped with state-of-the-art testing and analysis equipment and a professional R&D team that has accumulated rich experience in the field of polymer composite modified materials. Dongguan FOREVER Co., Ltd also maintains close partnerships with renowned universities and research institutions to stay at the forefront of technology and drive innovation in the industry
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}