CAS No.: | 9002-98-6 |
---|---|
Formula: | C39h30n2o6 |
EINECS: | 205-793-9 |
Samples: |
BAG
|
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
Product Description | |||
High flow Polyetherimide (Tg 217°C) with low level of transparent mold release. Very low outgassing and plateout for optimally reduced need for mold cleaning. May be beneficial for automotive lighting applications where highly metallized, reflective surfaces are required. Haze onset temperature of 204°C ( IP method). |
|||
General | |||
Form | Resin Pellets | ||
Feature | Good Platable Low Odor |
Good Dimensional Low Creep Sensitivity |
Good Thermal |
Uses Automotive Automotive Lighting | |||
Physical | Nominal Value | Test Method | |
Mold Shrinkage, Flow(3.2 mm) | 0.5 - 0.7 % | Method | |
Mold Shrinkage, XFlow(3.2 mm) | 0.5 - 0.7 % | Method | |
Density / Specific Gravity | 1.27 g/cm³ | ISO 1183 | |
Water Absorption(23 °C;saturated) | 1.25 % | ISO 62-1 | |
Moisture Absorption(50% RH;23 °C) | 0.7 % | ISO 62 | |
Melt Volume Rate, MVR(5 kg;MVR at 360 °C) | 25 cm³/10 min | ISO 1133 | |
Mechanical | Nominal Value | Test Method | |
Instrumented Dart Impact, Total Energy(23 °C) | 33 J | ASTM D3763 | |
Izod Impact, Unnotched | ISO 180/1U | ||
80*10*4;23 °C | NB kJ/m² | ||
80*10*4;-30 °C | NB kJ/m² | ||
Izod Impact, Notched | ISO 180/1A | ||
80*10*4;23 °C | 5 kJ/m² | ||
80*10*4;-30 °C | 5 kJ/m² | ||
C harpy Impact, V-Notched(23 °C;Edgew;80*10*4;sp =62 mm 0) | 3 kJ/m² | ISO 179 1eA | |
Tensile Stress, Yield(5 mm/min) | 105 MPa | ISO 527 | |
Tensile Stress, Break(5 mm/min) | 85 MPa | ISO 527 | |
Tensile Strain, Yield(5 mm/min) | 6 % | ISO 527 | |
Tensile Strain, Break(5 mm/min) | 60 % | ISO 527 | |
Tensile Modulus(1 mm/min) | 3200 MPa | ISO 527 | |
Flexural Stress, Yield(2 mm/min) | 160 MPa | ISO 178 | |
Flexural Modulus(2 mm/min) | 3300 MPa | ISO 178 | |
Thermal | Nominal Value | Test Method | |
FMVSS Burning Speed(Thickness; 2 mm) | 0 - 5 mm/min | FMVSS 302 | |
CTE, Flow(23°C to 150°C) | 5.0E-05 1/°C | ISO 11359-2 | |
CTE, XFlow(23°C to 150°C) | 5.0E-05 1/°C | ISO 11359-2 | |
Vicat Softening Temperature Rate A/50 Rate B/50 Rate B/120 |
215 °C 211 °C 212 °C |
ISO 306 | |
HDT/Be(Edgew;120*10*4;sp =100mm; 0.45 Mpa) | 200 °C | ISO 75/Be | |
Hdt/Ae(1.8 MPa;Edgew;120*10*4;sp =100mm) | 190 °C | ISO 75/Ae | |
HDT/Af(1.8) | 193 °C | ISO 75/Af | |
Metallized Haze Onset | 204 °C | Method | |
Processing | Nominal Value | ||
Drying Temperature<Injection> | 150 °C | ||
Drying Time<Injection> | 4 - 6 hrs | ||
Drying Time, Cumulative<Injection> | 24 hrs | ||
Maximum Moisture Content<Injection> | 0.02 % | ||
Melt Temperature<Injection> | 350 - 400 °C | ||
Nozzle Temperature<Injection> | 345 - 400 °C | ||
Front, Zone 3 Temperature<Injection> | 345 - 400 °C | ||
Middle, Zone 2 Temperature<Injection> | 340 - 400 °C | ||
Rear, Zone 1 Temperature<Injection> | 330 - 400 °C | ||
Mold Temperature<Injection> | 135 - 165 °C | ||
Back Pressure<Injection> | 0.3 - 0.7 MPa | ||
Screw Speed <Injection> | 40 - 70 rpm | ||
Shot To Cylinder Size<Injection> | 40 - 60 % | ||
Vent Depth <Injection> | 0.025 - 0.076 mm |
Dongguan FOREVER Co., Ltd. Was founded in 2005 and is a national high-tech enterprise and national-level specialized giant enterprise dedicated to the research and production of polymer composite modified materials. With an annual capacity of 100, 000 tons of modified engineering plastics. Since its establishment, the company has been committed to the research of high-performance composite materials such as modified PC, PC/ABS, PBT, PA6, etc. Its products have been widely used in industries such as LED lighting, consumer electronics, new energy, security equipment, and small household appliances, providing customers with efficient delivery experience, ultimate price advantages, and strict quality assurance, contributing to the creation of a green and environmentally friendly world.
Dongguan FOREVER Co., Ltd's main products has obtained UL certification for RTI authorized temperature, outdoor weather resistance F1 and 5VA flame retardancy grades, as well as recycled-certified post-consumer low-carbon circulation products. Dongguan FOREVER Co., Ltd's products are highly recognized by customers worldwide for their reliable quality, excellent performance, and superior cost-effectiveness.
With a strong focus on research and development, Dongguan FOREVER Co., Ltd. Has established an advanced technology research and development center, equipped with state-of-the-art testing and analysis equipment and a professional R&D team that has accumulated rich experience in the field of polymer composite modified materials. Dongguan FOREVER Co., Ltd also maintains close partnerships with renowned universities and research institutions to stay at the forefront of technology and drive innovation in the industry