Feature: | Natural Color |
---|---|
CAS No.: | 9003-54-7 |
Formula: | C33h33n3X2 |
Samples: |
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
Product Description | ||||
QUINN SAN sheets are characterized by good optical properties and a brilliant surface. The QUINN SAN range contains sheets that are easy to handle, to vacuum form, and show a very good dimensional stability. Typical for QUINN SAN sheets are their very good chemical resistance: they are resistant to most fats, dilute acid solutions, oils and common bleaching agents, as well as some solvents and weak alkaline solutions. The sheets can be used in- and outdoor (in UVP-version) and are resistant to temperature fluctuations. QUINN SAN products can be used in contact with foodstuffs. QUINN SAN material also combines the following excellent properties: High softening point, low water absorption, and high stiffness.Industrial (door) glazing Covers for foodstuffs Covers for office equipment Screen printing Advertising signs Fittings for shops and exhibitions Displays Flat or curved shower screens Greenhouse glazing Room dividersQuinn Manufacturing Group rebranded its Plastics Division as Polycasa in 2013. |
||||
General | ||||
Form Sheet | ||||
Feature Outdoor | Fda | |||
Physical | Nominal Value | Test Method | ||
Density / Specific Gravity | 1.08 g/cm³ | |||
Hardness, Rockwell M | 83 | ISO 2039-2 | ||
Mechanical | Nominal Value | Test Method | ||
Tensile Strength, Break | 60.0 MPa | ISO 527-2 | ||
Elongation at Break | 1.8 % | ISO 527-2 | ||
Tensile Modulus | 3900 MPa | ISO 527-2 | ||
Flexural Strength | 105 MPa | ISO 178 | ||
Flexural Modulus | 3750 MPa | ISO 178 | ||
Izod Impact, Notched, ISO(Temperature; 23 °C) | 1.30 kJ/m² | ISO 180 | ||
C harpy Impact Unnotched(Temperature; 23 °C) | 13 kJ/m² | ISO 179/1 | ||
Thermal | Nominal Value | Test Method | ||
CTE, Flow(Temperature; 20 °C) | 50.0 - 70.0 µm/m-°C | DIN 53752 | ||
Specific Heat Capacity | 1.38 J/g-°C | ASTM D2766 | ||
Thermal Conductivity | 0.170 W/m-K | DIN 52612 | ||
Maximum Service Temperature, Air | 85.0 °C | |||
Deflection Temperature | ISO 75 | |||
Pressure; 0.46 MPa | 101 °C | |||
Pressure; 1.8 MPa | 98.0 °C | |||
Vicat Softening Point | 106 °C | ISO 306 | ||
Decomposition Temperature | > = 280 °C | |||
Electrical | Nominal Value | Test Method | ||
Volume Resistivity | 1.00e+14 ohms ·cm | IEC 6093 | ||
Surface Resistance | > = 1.00e+14 Ohms | IEC 6093 | ||
Optical | Nominal Value | Test Method | ||
Refractive Index | 1.57 | |||
Transmittance, Visible | 86 % | DIN 5036-3 | ||
Processing | Nominal Value | |||
Processing Temperature | 165 - 190 °C |
Suppliers with verified business licenses