Feature: | Plastics |
---|---|
CAS No.: | 32131-17-2 |
Formula: | C36h66n6o6 |
Samples: |
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
PA66-G30-XH is a reinforced Polyamide 66 (Nylon 66) material, incorporating a 30% glass fiber filler. Notable characteristics of PA66-G30-XH include its flame retardant properties, excellent aesthetics, dimensional stability, resistance to high temperatures, and high strength. This material finds common use in various applications such as appliances, electrical/electronic components, engineering/industrial parts, and tools.
General |
|
Form Resin Pellets |
|
Filler 30 % Glass Fiber |
|
Feature Good Dimensional Good Surface Appearance Good Thermal |
|
Uses |
Appliance Components Electrical Power Mechanical Parts |
Physical Nominal Value Test Method |
|
Density / Specific Gravity 1.36 g/cm³ ISO 1183 |
|
Molding Shrinkage, Across Flow 0.90 % ISO 2577 |
|
Molding Shrinkage, Flow 0.30 % ISO 2577 |
|
Water Absorption, Equilibrium(50% RH;23 °C) 1.8 % ISO 62 |
|
Ash Content 30 % ISO 3451-1 |
|
Mechanical Nominal Value Test Method |
|
Tensile Stress 185 MPa ISO 527-2/10 |
|
Tensile Strain, Break 3.0 % ISO 527-2/10 |
|
Flexural Modulus(2 mm/min) 8200 MPa ISO 178 |
|
Flexural Stress(2 mm/min) 270 MPa ISO 178 |
|
Notched Izod Impact Strength(23 °C) 14 kJ/m² ISO 180 |
|
Thermal Nominal Value Test Method |
|
Heat Deflection Temperature, Unannealed |
|
0.45 MPa 255 °C ISO 75-2/B |
|
1.8 MPa 250 °C ISO 75-2/A |
|
Flame Rating HB UL 94 |
|
Electrical Nominal Value Test Method |
|
Volume Resistivity 1.0e+15 ohms ·cm IEC 60093 |
Processing |
Nominal Value |
Drying Temperature - Desiccant Dryer<Injection> |
90 - 110 °C |
Drying Time - Desiccant Dryer<Injection> |
4.0 - 6.0 hr |
Rear Temperature<Injection> |
260 - 275 °C |
Middle Temperature<injection> |
270 - 280 °C |
Front Temperature<Injection> |
280 - 290 °C |
Processing Temp, Melt<Injection> |
270 - 290 °C |
Mold Temperature<Injection> |
50 - 120 °C |
Injection Rate<Injection> |
Moderate-Fast |
Suppliers with verified business licenses