Feature: | Oxidative Degradable |
---|---|
CAS No.: | 32131-17-2 |
Formula: | (C12h22n2o2)N |
Samples: |
BAG
|
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
long glass fiber PPA material achieves extremely high mechanical and thermal properties
https://forever-plastics.en.made-in-china.com/product/rJwRvlcdZpWD/China-Nylon-PA6-GF33-PA66-Granules-PA6-with-30GF-Polyamide-PA66-30-GF-PA6-Material.html Heat-conducting nylon
Product Description | ||||
PPA LGF-1950 HS is 50% long glass fiber reinforced, easy-flowing PPA which can be processed on mostinjection molding machines. This material achieves extremely high mechanical and thermal properties, in combination with ease of processing and fast cycle times. It exhibits high strength, stiffness and impact strength at high temperatures; excellent creep and fatigue resistance; isotropic mechanical properties and reduced anisotropic shrinkage; high shear strength and high burst pressure; and an excellent surface finish. Black: PPA LGF-1950 HS BK 545-9 Natural: PPA LGF-1950 HS NT-9 |
||||
General | ||||
Form | Resin Pellets | |||
Filler | ||||
Feature |
Creep Resistance Excellent Fatigue | High Impact | ||
High Temperature Stiff | ||||
Uses |
Industrial Applications Aerospace |
Consumer | ||
Physical | Nominal Value | Test Method | ||
Density, dry | 1.61 g/cm³ | ISO 1183 | ||
Dry: Molding Shrinkage | 0.25 % | Internal Method | ||
Dry: Water Absorption, Equilibrium(50% RH;23 °C) 0.80 % ISO 62 | ||||
Mechanical | Nominal Value | Test Method | ||
Dry: Tensile Modulus 23 °C 90 °C 120 °C |
18500 MPa 16500 MPa 10500 MPa |
ISO 527-2 | ||
Condition: Tensile Modulus(23 °C) | 18300 MPa | ISO 527-2 | ||
Dry: Tensile Stress, Break 23 °C 90 °C 120 °C |
275 MPa 210 MPa 135 MPa |
ISO 527-2 | ||
Condition: Tensile Stress, Break(23 °C) | 260 MPa | ISO 527-2 | ||
Dry: Tensile Strain, Break | 2.0 % | ISO 527-2 | ||
Condition: Tensile Strain, Break | 2.0 % | ISO 527-2 | ||
Dry: Flexural Modulus(23 °C) | 17500 MPa | ISO 178 | ||
Dry: Flexural Stress | 410 MPa | ISO 178 | ||
Dry: Charpy Notched Impact Strength(23 °C) | 35 kJ/m² | ISO 179 | ||
Dry: Charpy Unnotched Impact Strength(23 °C) | 80 kJ/m² | ISO 179 | ||
Thermal | Nominal Value | Test Method | ||
Dry: Heat Deflection Temperature, Unannealed 0.45 MPa 1.8 MPa |
300 °C 285 °C |
ISO 75-2/B ISO 75-2/A |
||
Thermal Conductivity(dry) | 0.35 W/m-K | ISO 22007 | ||
Coefficient of Linear Thermal Expansion(dry) | 2.0E-5 cm/cm/°C | ISO 7991 | ||
Electrical | Nominal Value | Test Method | ||
Dry: Surface Resistivity | 1.0E+13 ohms | ASTM D257 | ||
Dry: Dielectric Strength | 35 kV/mm | IEC 60243-1 | ||
Dry: Comparative Tracking Index | 600 V | IEC 60112 | ||
Processing | Nominal Value | |||
Drying Temperature<Injection> | 120 °C | |||
Drying Time<Injection> | 4.0 hr | |||
Suggested Max Moisture<Injection> | 0.030 - 0.060 % | |||
Suggested Max Regrind <Injection> | 20 % | |||
Rear Temperature<Injection> | 320 - 340 °C | |||
Middle Temperature<injection> | 325 - 340 °C | |||
Front Temperature<Injection> | 325 - 340 °C | |||
Nozzle Temperature<Injection> | 325 - 345 °C | |||
Processing Temp, Melt<Injection> | < 345 °C | |||
Mold Temperature<Injection> | 130 - 160 °C |
Forever Co.,Ltd