Feature: | Oxidative Degradable |
---|---|
Material: | Polyamide(Nylon 6.66)/PA |
Usage: | General Plastics, Engineering Plastics, Specialty Plastics |
Samples: |
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: |
![]() ![]() ![]() ![]() ![]() ![]() ![]() |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
https://forever-plastics.en.made-in-china.com/product/rJwRvlcdZpWD/China-Nylon-PA6-GF33-PA66-Granules-PA6-with-30GF-Polyamide-PA66-30-GF-PA6-Material.html30% Glass Reinforced, Heat Stabilized, Flame Retardant, High Flow
Product Description | |||
30% Glass Reinforced, Heat Stabilized, Flame Retardant, High Flow | |||
General | |||
Form | Resin Pellets | ||
Filler | 30 % Glass Fiber | ||
Physical | Nominal Value | Test Method | |
Density | 1.59 g/cm³ | dry;ISO 1183 | |
Water Absorption | 4.5 % | ISO 62 | |
Moisture Absorption | 1.30 % | ISO 62 | |
Linear Mold Shrinkage, Flow | 0.21 % | ISO 294-4 | |
Linear Mold Shrinkage, Transverse | 0.77 % | ISO 294 | |
Mechanical | Nominal Value | Test Method | |
Tensile Strength, Ultimate | ISO 527-1/2 | ||
100 MPa | |||
150 MPa | |||
Elongation at Break | ISO 527-1/2 | ||
2.5 % | |||
5.0 % | |||
Tensile Modulus | ISO 527-1/2 | ||
7030 MPa | |||
1.15E+4 MPa | |||
Charpy Impact Unnotched | ISO 179 1eU | ||
Temperature; 23 °C | 59.8 kJ/m² | ||
Temperature; -30 °C | 59.8 kJ/m² | ||
Temperature; 23 °C | 59.8 kJ/m² | ||
Temperature; -30 °C | 59.8 kJ/m² | ||
Charpy Impact, Notched | ISO 179 1eA | ||
Temperature; -30 °C | 12 kJ/m² | ||
Temperature; -30 °C | 12 kJ/m² | ||
Temperature; 23 °C | 13 kJ/m² | ||
Temperature; 23 °C | 15 kJ/m² |
Thermal | Nominal Value | Test Method |
CTE, Flow | 20.0 µm/m-°C | ISO 11359-1/-2 |
CTE, linear, Transverse to Flow | 110 µm/m-°C | dry;ISO 11359-1/- 2 |
Melting Point(10°C/min) | 220 °C | ISO 11357-1/-3 |
Deflection Temperature Pressure; 0.46 MPa Pressure; 1.8 MPa |
215 °C 205 °C |
ISO 75-1/-2 |
Flammability, UL94 Thickness; 1.5 mm Thickness; 0.749 mm |
V-0 V-0 |
IEC 60695-11-10 |
Electrical | Nominal Value | Test Method |
Volume Resistivity | 1.00e+13 ohms·cm 1.00e+15 ohms·cm |
IEC 60093 |
Surface Resistance | 1.00e+14 Ohms | IEC 60093 |
Dielectric Constant Frequency; 1000000 Hz Frequency; 100 Hz Frequency; 1000000 Hz Frequency; 100 Hz |
3.4 3.5 4.0 10 |
IEC 60250 |
Dissipation Factor Frequency; 100 Hz Frequency; 1000000 Hz Frequency; 1000000 Hz Frequency; 100 Hz |
0.0060 0.012 0.070 0.30 |
IEC 60250 |
Comparative Tracking Index | 325 V |
Processing | Nominal Value |
Injection | |
Drying Temperature | 80.0 °C |
Drying Time | 4.0 - 8.0 hr |
Rear Temperature | 230 - 250 °C |
Middle Temperature | 230 - 260 °C |
Front Temperature | 230 - 260 °C |
Nozzle Temperature | 250 - 280 °C |
Melt Temperature | 245 - 270 °C |
Mold Temperature | 40 - 80 °C |
Injection Rate | Moderate-Fast |
Back Pressure | 3.00 - 10.0 MPa |
Screw Compression Ratio | 2.5:1.0 |