Feature: | Plastics |
---|---|
CAS No.: | 25766-59-0 |
Formula: | C6h4c(CH3)2c6h4oco2-]N |
Samples: |
BAG
|
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
LDS Laser Direct Structuring Improved Impact Resin Pellets Laser Markable polycarbonate
https://forever-plastics.en.made-in-china.com/product-list-1.html
LDS (Laser Direct Structuring), Improved Impact | ||||
General | ||||
Form | Resin Pellets | |||
Feature | Lds | Ductile | Laser Markable | |
UL Yellow Card E340159-101357462 | ||||
Uses Laser Direct Structuring | Cell Phone Cases | |||
Physical | Nominal Value | Test Method | ||
Density / Specific Gravity | 1.23 g/cm³ | ISO 1183 | ||
Melt Mass-Flow Rate, MFR(260 °C;5 kg) | 14 g/10min | ISO 1133 | ||
Melt Volume-Flow Rate, MVR(260 °C;5 kg) | 14 cm³/10 min | ISO 1133 | ||
Molding Shrinkage, Across Flow | 0.50 - 0.70 % | Internal Method | ||
Molding Shrinkage, Flow | 0.50 - 0.70 % | Internal Method | ||
Mechanical | Nominal Value | Test Method | ||
Tensile Modulus | 2250 MPa | ISO 527-2/1 | ||
Tensile Stress, Yield | 49.0 MPa | ISO 527-2/50 | ||
Tensile Strain, Yield | 4.0 % | ISO 527-2/50 | ||
Tensile Strain, Break | > 50 % | ISO 527-2/50 | ||
Flexural Modulus(2 mm/min) | 2200 MPa | ISO 178 | ||
Flexural Stress(2 mm/min) | 77.0 MPa | ISO 178 | ||
C harpy Unnotched Impact Strength -30 °C 23 °C |
No Break No Break |
ISO 179 | ||
Notched Izod Impact Strength -20 °C 23 °C |
40 kJ/m² 55 kJ/m² |
ISO 180/4A | ||
Multi-Axial Instrumented Impact Energy(23 °C) | 35.0 J | ISO 6603-2 | ||
Thermal | Nominal Value | Test Method | ||
Heat Deflection Temperature, Unannealed(1.8 MPa) | 100 °C | ISO 75-2/A | ||
Vicat Softening Temperature | 122 °C | ISO 306 | ||
CLTE, Flow | 7.0E-5 cm/cm/°C | ISO 11359-2 | ||
CLTE, Transverse | 7.0E-5 cm/cm/°C | ISO 11359-2 | ||
Electrical | Nominal Value | Test Method | ||
Surface Resistivity | > 1.0E+15 Ohms | IEC 60093 | ||
Volume Resistivity | > 1.0E+15 Ohms ·cm | IEC 60093 | ||
Dielectric Constant(1.0e+6 Hz) | 3.00 | IEC 60250 | ||
Dissipation Factor(1.0e+6 Hz) | 6.0E-3 | IEC 60250 | ||
Processing | Nominal Value | |||
Drying Temperature - Hot Air Dryer<Injection> | 100 - 110 °C | |||
Drying Time - Hot Air Dryer<Injection> | 4.0 - 6.0 hr | |||
Rear Temperature<Injection> | 260 - 280 °C | |||
Middle Temperature<injection> | 260 - 280 °C | |||
Front Temperature<Injection> | 260 - 280 °C | |||
Nozzle Temperature<Injection> | 250 - 270 °C | |||
Mold Temperature<Injection> | 40 - 80 °C |
Forever Co.,Ltd