Feature: | Oxidative Degradable |
---|---|
CAS No.: | 32131-17-2 |
Formula: | (C12h22n2o2)N |
Samples: |
BAG
|
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
Polyamine Nylon 66 is 45% Carbon/Glass Reinforced Heat Stabilized Polyamide 66
https://forever-plastics.en.made-in-china.com/product/rJwRvlcdZpWD/China-Nylon-PA6-GF33-PA66-Granules-PA6-with-30GF-Polyamide-PA66-30-GF-PA6-Material.html Heat-conducting nylon
Product Description | |||
75CG45HSL BK409 is a 45% Carbon/Glass Reinforced, Heat Stabilized, Polyamide 66. | |||
General | |||
Form Resin Pellets | |||
Filler | 45 % Carbon Fiber/Glass Fiber |
||
Feature Good Thermal | |||
Physical Nominal Value Test Method | |||
Dry: Moulding shrinkage, parallel 0.2 % | ISO 294-4, ISO 2577 | ||
Dry: Moulding shrinkage, normal 0.6 % | ISO 294-4, ISO 2577 | ||
Density, dry 1.42 g/cm³ ISO 1183 | |||
Mechanical Nominal Value Test Method | |||
Dry: Tensile Modulus 17500 MPa ISO 527-1/-2 | |||
Dry: Stress at break 175 MPa ISO 527-1/-2 | |||
Dry: Strain at break 2.9 % ISO 527-1/-2 | |||
Dry: Flexural Modulus 15500 MPa ISO 178 | |||
Dry: Flexural Strength 300 MPa ISO 178 | |||
Dry: Charpy Impact Strength(Temperature; 23 °C) 80 kJ/m² ISO 179 1eU | |||
Dry: Charpy Notched Impact Strength ISO 179 1eA | |||
Temperature; 23 °C 15 kJ/m² | |||
Temperature; -40 °C 19 kJ/m² | |||
Thermal Nominal Value Test Method | |||
Dry: Melting Temperature(18° F/min) 256 °C ISO 11357-1/-3 | |||
Dry: Temp. of deflection under load ISO 75-1/-2 | |||
Load; 1.82 MPa 218 °C | |||
Load; 0.45 MPa 238 °C | |||
FMVSS Class | B | ||
Burning rate(1 mm) | < 100 mm/min | ||
Electrical | Nominal Value | Test Method | |
Dry: Volume resistivity, conductive plastics | 3 ohms ·cm | ASTM D4496 | |
Processing | Nominal Value | ||
Injection | |||
Drying Recommended | YES | ||
Drying Temperature | 80 °C | ||
Drying Time, Dehumidified Dryer | 2 - 4 h | ||
Processing Moisture Content | < = 0.02 % | ||
Melt Temperature Optimum | 290 °C | ||
Min. melt temperature | 280 °C | ||
Max. melt temperature | 305 °C | ||
Max. screw tangential speed | 0.2 m/s | ||
Mold Temperature Optimum | 100 °C | ||
Min. mold temperature | 70 °C | ||
Max. mould temperature | 120 °C | ||
Hold pressure range | 50 - 100 MPa | ||
Hold pressure time | 3 s/mm | ||
Ejection Temperature | 210 °C |
Forever Co.,Ltd
Suppliers with verified business licenses