Feature: | Plastics |
---|---|
CAS No.: | 32131-17-2 |
Formula: | C36h66n6o6 |
Samples: |
25kg/bag
|
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
Product Description | ||||||
LNP LUBRICOMP RFL36 compound is based on Nylon 6/6 resin containing 30% glass fiber, 15% PTFE. Added features of this grade include: Wear Resistant. | ||||||
General | ||||||
Form | Resin Pellets | |||||
Filler | 30 % Glass Fiber | 15 % PTFE | ||||
Feature | Abrasion Resistant | Structural Internally Lubricated | ||||
UL Yellow Card |
E121562-101344610 E207780-101282824 E45329-101344595 |
|||||
Uses | Consumer | Electrical | Building | and Construction | ||
Physical | Nominal Value | Test Method | ||||
Wear Factor Washer | 12 10^-10 in^5-min/ft-lb-hr | ASTM D3702 Modified: Manual |
||||
Dynamic Cof | 0.59 | ASTM D3702 Modified: Manual |
||||
Density / Specific Gravity | 1.51 g/cm³ | ISO 1183 | ||||
Water Absorption(24 hrs;23 °C) | 1.34 % | ISO 62-1 | ||||
Moisture Absorption(50% RH;23 °C) | 0.46 % | ISO 62 | ||||
Melt Volume Rate, MVR(MVR at 275°C/5 kg) | 15 - 20 cm³/10 min | ISO 1133 | ||||
Mold Shrinkage, Flow(24 hrs) | 0.2 - 0.5 % | ISO 294 | ||||
Mold Shrinkage, XFlow(24 hrs) | 0.8 - 1.2 % | ISO 294 |
Mechanical | Nominal Value | Test Method |
Notched Izod Impact Strength(notched;80*10*3;-40 °C 0)12 kJ/m² | ISO 180/1A | |
Izod Impact, Unnotched(80*10*4;23 °C) 84 kJ/m² | ISO 180/1U | |
Unnotched Izod Impact Strength(unnotched;80*10*4;-4074 kJ/m² °C 0) |
ISO 180/1U | |
Izod Impact, Notched(80*10*4;23 °C) 16 kJ/m² | ISO 180/1A | |
Tensile Stress, Break(5 mm/min) 166 MPa | ISO 527 | |
Tensile Strain, Break(5 mm/min) 2.6 % | ISO 527 | |
Flexural Stress, Yield 2 mm/min 2 mm/min;60°C 2 mm/min;100 °C 2 mm/min;150°C 2 mm/min;200°C |
234 MPa 179 MPa 131 MPa 96 MPa 83 MPa |
ISO 178 |
Flexural Stress, break(2 mm/min) 277 MPa | ISO 178 | |
Flexural Strain, Break 2 mm/min 2 mm/min;60°C 2 mm/min;100 °C 2 mm/min;150°C 2 mm/min;200°C |
4.1 % 6.1 % 6.6 % 5.6 % 6.3 % |
ISO 178 |
Flexural Modulus 2 mm/min 2 mm/min;60°C 2 mm/min;100 °C 2 mm/min;150°C 2 mm/min;200°C |
9100 MPa 5300 MPa 4200 MPa 3500 MPa 3100 MPa |
ISO 178 |
Thermal | Nominal Value | Test Method |
UL Recognized(≥ 0.75 mm) | HB | UL 94 |
Specific Heat | 1988 J/kg-K | ASTM E1269 |
CTE, Flow(23°C to 60°C) | 2.5e-05 1/°C | ISO 11359-2 |
CTE, XFlow(23°C to 60°C) | 7.5e-05 1/°C | ISO 11359-2 |
HDT/Bf(0.45) | > 220 °C | ISO 75/Bf |
HDT/Af(1.8) | > 220 °C | ISO 75/Af |
Thermal Conductivity | 0.25 W/m-K | ASTM D5930 |
Relative Temp Index, Elec | 120 °C | UL 746B |
Relative Temp Index, Mechanical with Impact | 65 °C | UL 746B |
Relative Temp Index, Mechanical without Impact | 65 °C | UL 746B |
Processing | Nominal Value | |
Drying Temperature<Injection> | 80 °C | |
Drying Time<Injection> | 4 hrs | |
Maximum Moisture Content<Injection> | 0.15 - 0.25 % | |
Melt Temperature<Injection> | 280 - 305 °C | |
Front, Zone 3 Temperature<Injection> | 295 - 305 °C | |
Middle, Zone 2 Temperature<Injection> | 280 - 295 °C | |
Rear, Zone 1 Temperature<Injection> | 265 - 275 °C | |
Mold Temperature<Injection> | 95 - 110 °C | |
Back Pressure<Injection> | 0.2 - 0.3 MPa | |
Screw Speed<Injection> | 30 - 60 rpm |
Suppliers with verified business licenses