| Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car |
|---|---|
| Hardness: | Hardened Tooth Surface |
| Gear Position: | Internal Gear |
| Samples: |
|---|
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier 
ITEM NO: POM M90UV
FEATURE: Injection grade
| General | ||||
| Form | Resin Pellets | |||
| Feature | Outdoor | |||
| Physical | Nominal Value | Test Method | ||
| Density / Specific Gravity | 1.41 g/cm³ | ISO 1183 | ||
| Melt Volume-Flow Rate, MVR(190 °C;2.16 kg) | 8.0 cm³/10 min | ISO 1133 | ||
| Water Absorption, Saturation(23 °C) | 0.75 % | ISO 62 | ||
| Water Absorption, Equilibrium(50% RH;23 °C) | 0.20 % | ISO 62 | ||
| Mechanical | Nominal Value | Test Method | ||
| Tensile Modulus | 2600 MPa | ISO 527-2/1A | ||
| Tensile Stress, Yield | 65.0 MPa | ISO 527-2/1A/50 | ||
| Tensile Strain, Yield | 10 % | ISO 527-2/1A/50 | ||
| Flexural Modulus(23 °C) | 2550 MPa | ISO 178 | ||
| Flexural Stress(3.5% Strain) | 70.0 MPa | ISO 178 | ||
| C harpy Notched Impact Strength(23 °C) | 6.1 kJ/m² | ISO 179 1eA | ||
| Notched Izod Impact Strength(23 °C) | 5.8 kJ/m² | ISO 180/1A | ||
| Thermal | Nominal Value | Test Method | ||
| Heat Deflection Temperature, Unannealed(1.8 MPa) | 101 °C | ISO 75-2/A | ||
| Vicat Softening Temperature | 161 °C | ISO 306/B50 | ||
| Melting Point | 165 °C | ISO 11357-3 | ||
| CLTE, Flow | 1.1E-4 cm/cm/°C | ISO 11359-2 | ||
| CLTE, Transverse | 1.2E-4 cm/cm/°C | ISO 11359-2 | ||
| Processing | Nominal Value |
| Drying Temperature<Injection> | 100 - 120 °C |
| Drying Time<Injection> | 3.0 - 4.0 hr |
| Rear Temperature<Injection> | 170 - 180 °C |
| Middle Temperature<injection> | 180 - 190 °C |
| Front Temperature<Injection> | 180 - 190 °C |
| Nozzle Temperature<Injection> | 190 - 200 °C |
| Processing Temp, Melt<Injection> | 180 - 200 °C |
| Mold Temperature<Injection> | 80 - 120 °C |
| Injection Rate<Injection> | Slow-Moderate |
| Back Pressure<Injection> | < 4.00 MPa |
| Zone4 temperature<Injection> | 190 - 200 °C |
| Hot Runner Temperature<Injection> | 180 - 200 °C |
NOTICE: The data contained are based on our current knowledge and experience. This information may be subject to revision without informing in advance as new knowledge and experience become available. Because use conditions and applicable laws may differ from one location to another and may change with time, Customer is responsible for determining whether products and the information in t his document are appropriate for Customer's use and for ensuring that Customer's workplace and disposal practices are in compliance with applicable laws. Seller assumes no obligation or liability for the information in this document.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}