Feature: | Oxidative Degradable |
---|---|
CAS No.: | 32131-17-2 |
Formula: | (C12h22n2o2)N |
Samples: |
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
Polyamide 6, 30% mineral filler, flame retardant, halogen and red phosphorous free
https://forever-plastics.en.made-in-china.com/product/rJwRvlcdZpWD/China-Nylon-PA6-GF33-PA66-Granules-PA6-with-30GF-Polyamide-PA66-30-GF-PA6-Material.html Heat-conducting nylon
Product Description | ||||
( 6M30V0EF) Polyamide 6, 30% mineral filler, flame retardant, halogen and red phosphorous free, for injection moulding. | ||||
General | ||||
Form Resin Pellets | ||||
Filler 30 % Mineral | ||||
Non-Brominated & Non- | ||||
Feature | Chlorinated Flame | |||
Retardant | ||||
Physical | Nominal Value | Test Method | ||
Density / Specific Gravity | 1.42 g/cm³ | ISO 1183 | ||
Molding Shrinkage, Across Flow(50% RH;23 °C;72 hr) | 0.60 - 0.80 % | ISO 2577 | ||
Molding Shrinkage, Flow(50% RH;23 °C;72 hr) | 0.50 - 0.70 % | ISO 2577 | ||
Mechanical | Nominal Value | Test Method | ||
Tensile Modulus | 5800 MPa | ISO 527-2/1 | ||
Tensile Stress, Break | 70.0 MPa | ISO 527-2/5 | ||
Tensile Strain, Break | 2.0 % | ISO 527-2/5 | ||
Flexural Modulus(2 mm/min) | 5500 MPa | ISO 178 | ||
Flexural Stress(2 mm/min) | 110 MPa | ISO 178 | ||
C harpy Notched Impact Strength(23 °C) | 3.0 kJ/m² | ISO 179 1eA | ||
C harpy Unnotched Impact Strength(23 °C) | 30 kJ/m² | ISO 179 1eU | ||
Notched Izod Impact Strength(23 °C) | 3.5 kJ/m² | ISO 180/1A | ||
Unnotched Izod Impact Strength(23 °C) | 25 kJ/m² | ISO 180/1U | ||
Thermal | Nominal Value | Test Method | ||
Heat Deflection Temperature, Unannealed | ||||
0.45 MPa | 200 °C | ISO 75-2/B | ||
1.8 MPa | 115 °C | ISO 75-2/A | ||
Vicat Softening Temperature | 200 °C | ISO 306/B50 | ||
Melting Point | 221 °C | ISO 11357-3 | ||
Burning rate | < 100 mm/min | FMVSS 302 | ||
Flame Rating(1.5 mm) | V-0 | UL 94 | ||
Glow Wire Flammability Index(1 - 3 mm) | 960 °C | IEC 60695-2-12 | ||
Glow Wire Ignition Temperature [GWIT](1 - 3 mm) | 750 °C | IEC 60695-2-13 | ||
Electrical | Nominal Value | Test Method | ||
Surface Resistivity | 1.0E+13 ohms | IEC 60093 | ||
Volume Resistivity | 1.0e+15 ohms ·cm | IEC 60093 | ||
Comparative Tracking Index, Solution A | 600 V | IEC 60112 | ||
Processing | Nominal Value | |||
Drying Temperature<Injection> | 75 - 85 °C | |||
Drying Time<Injection> | 2.0 - 4.0 hr | |||
Processing Temp, Melt<Injection> | 240 - 270 °C | |||
Mold Temperature<Injection> | 80 - 100 °C |
Forever Co.,Ltd
Suppliers with verified business licenses