Color: | White |
---|---|
Form: | Resin Pellets |
Chemical Substances: | Polybutylece |
Samples: |
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
Product Description | ||||
PBT glass fiber 40% reinforced injection moulding grade. | ||||
General | ||||
Form | Resin Pellets | |||
Filler | 40 % Glass Fiber | |||
Low Warpage Abrasion Resistant |
Chemical Resistant Outdoor | Good Thermal Good Electrical Properties |
||
Physical | Nominal Value | Test Method | ||
Density / Specific Gravity | 1.66 g/cm³ | ASTM D792 | ||
Molding Shrinkage, Flow(1.6 mm) | 0.20 - 0.50 % | ASTM D955 | ||
Molding Shrinkage, Across Flow(1.6 mm) | 0.80 - 1.4 % | ASTM D955 | ||
Water Absorption(24 hr) | 0.030 % | ASTM D570 | ||
Rockwell Hardness, R-Scale | 121 | ASTM D785 | ||
Mechanical | Nominal Value | Test Method | ||
Tensile Strength | 132 MPa | ASTM D638 | ||
Tensile Elongation, Break | 3.2 % | ASTM D638 | ||
Flexural Modulus | 9810 MPa | ASTM D790 | ||
Flexural Strength | 191 MPa | ASTM D790 | ||
Notched Izod Impact(6.35 mm) | 100 J/m | ASTM D256 | ||
Thermal | Nominal Value | Test Method | ||
Deflection Temperature Under Load, Unannealed | ASTM D648 | |||
0.45 MPa | 220 °C | |||
1.8 MPa | 205 °C | |||
Melting Temperature | 225 °C | DSC | ||
CLTE, Flow | 3.0E-5 cm/cm/°C | ASTM D696 | ||
Flame Rating(3.2 mm) | V-0 | UL 94 | ||
Electrical | Nominal Value | Test Method | ||
Surface Resistivity | 1.0E+12 ohms | ASTM D257 | ||
Volume Resistivity | 1.0e+15 ohms·cm | ASTM D257 | ||
Dielectric Strength(2 mm) | 21 kV/mm | ASTM D149 | ||
Dielectric Constant(60 Hz) | 3.50 | ASTM D150 | ||
Dissipation Factor(60 Hz) | 1.0E-3 | ASTM D150 | ||
Arc Resistance | 100 sec | ASTM D495 |
Processing | Nominal Value |
Middle Temperature<injection> | 240 - 270 °C |
Nozzle Temperature<Injection> | 260 - 270 °C |
Mold Temperature<Injection> | 40 - 120 °C |
Injection Pressure<Injection> | 49.0 - 118 MPa |
Injection Rate<Injection> | Moderate - Fast |
Holding Pressure<Injection> | 29.4 - 78.5 MPa |
Back Pressure<Injection> | 0.00 - 0.294 MPa |
Screw Speed<Injection> | 60 - 120 rpm |
Suppliers with verified business licenses