| Feature: | Plastics |
|---|---|
| CAS No.: | 25766-59-0 |
| Formula: | C6h4c(CH3)2c6h4oco2-]N |
| Samples: |
25kg/bag
|
|---|
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier | Product Description | |||
| MVR (300°C/1.2 kg) 34 cm³/10 min; light guides; optics and lenses; PC with highest transmission; low viscosity; easy release; injection molding - melt temperature 280 - 320°C | |||
| General | |||
| Form | Resin Pellets | ||
| Feature | Medium-Low Viscosity High Clarity | Easy Release | |
| UL Yellow Card | E41613-233174 | ||
| Uses Lighting Applications Lenses Optical Applications | |||
| Physical | Nominal Value | Test Method | |
| Density / Specific Gravity(23 °C) | 1.19 g/cm³ | ISO 1183 | |
| Apparent Bulk Density, Pellets | 0.66 g/cm³ | ISO 60 | |
| Melt Volume-Flow Rate, MVR(300 °C;1.2 kg) | 34 cm³/10 min | ISO 1133 | |
| Molding Shrinkage, Across Flow(2 mm;500 bar;60x60x2mm;280 °C) |
0.70 % | ISO 294-4 | |
| Molding Shrinkage, Flow(2 mm;500 bar;60x60x2mm) | 0.65 % | ISO 294-4 | |
| Water Absorption, Saturation(23 °C) | 0.30 % | ISO 62 | |
| Water Absorption, Equilibrium(50% RH;23 °C) | 0.12 % | ISO 62 | |
| Ball Indentation Hardness | 115 MPa | ISO 2039-1 | |
| Mechanical Nominal Value | Test Method | ||
| Tensile Modulus(23 °C) 2350 MPa | ISO 527-2/1 | ||
| Tensile Stress, Yield(23 °C) 63.0 MPa | ISO 527-2/50 | ||
| Tensile Stress, Break(23 °C) 60.0 MPa | ISO 527-2/50 | ||
| Tensile Strain, Yield(23 °C) 6.0 % | ISO 527-2/50 | ||
| Tensile Strain, Break(23 °C) 130 % | ISO 527-2/50 | ||
| Nominal Tensile Strain at Break(23 °C) > 50 % | ISO 527-2/50 | ||
| Flexural Modulus(2 mm/min;23 °C) 2350 MPa | ISO 178 | ||
| Flexural Stress 2 mm/min;23 °C 2 mm/min;3.5% Strain;23 °C |
97.0 MPa 73.0 MPa |
ISO 178 | |
| Flexural Strain at Flexural Strength(2 mm/min;23 °C) 7.1 % | ISO 178 | ||
| C harpy Notched Impact Strength, Complete Break(-30 °C;3 mm) | 12 kJ/m² | ISO 179 1eA | |
| C harpy Notched Impact Strength, Partial Break(23 °C;3 mm) | 60 kJ/m² | ISO 179 1eA | |
| C harpy Unnotched Impact Strength -60 °C -30 °C 23 °C |
No Break No Break No Break |
ISO 179 1eU | |
| Notched Izod Impact Strength, Complete Break(-30 °C;3 12 kJ/m² mm) |
ISO 180/1A | ||
| Notched Izod Impact Strength, Partial Break(23 °C;3 mm)55 kJ/m² | ISO 180/1A | ||
| Multi-Axial Instrumented Impact Energy -30 °C 23 °C |
60.0 J 55.0 J |
ISO 6603-2 | |
| Multi-Axial Instrumented Impact, Peak Force -30 °C 23 °C |
5900 N 4900 N |
ISO 6603-2 | |
| Thermal | Nominal Value | Test Method |
| Heat Deflection Temperature, Unannealed 0.45 MPa 1.8 MPa |
138 °C 125 °C |
ISO 75-2/B ISO 75-2/A |
| Glass Transition Temperature(10 °C;min) | 145 °C | ISO 11357-2 |
| Vicat Softening Temperature | 145 °C 146 °C |
ISO 306/B50 ISO 306/B120 |
| Ball Pressure Test(136 °C) | Pass | IEC 60695-10-2 |
| CLTE, Flow(23 - 55 °C) | 6.5E-5 cm/cm/°C | ISO 11359-2 |
| CLTE, Transverse(23 - 55 °C) | 6.5E-5 cm/cm/°C | ISO 11359-2 |
| Thermal Conductivity, Across Flow(23 °C) | 0.20 W/m-K | ISO 8302 |
| RTI Elec(1.5 mm) | 125 °C | UL 746 |
| RTI Imp(1.5 mm) | 115 °C | UL 746 |
| RTI Str(1.5 mm) | 125 °C | UL 746 |
| Flame Rating, CL 2.9 mm 0.75 mm |
HB V-2 |
UL 94 |
| Glow Wire Flammability Index 1 mm 1.5 mm 3 mm |
850 °C 875 °C 930 °C |
IEC 60695-2-12 |
| Glow Wire Ignition Temperature [GWIT] 0.75 mm 1.5 mm 3 mm |
875 °C 875 °C 900 °C |
IEC 60695-2-13 |
| Oxygen Index, Procedure A | 28 % | ISO 4589-2 |
| Burning Rate, US-FMVSS( > 1 mm) | passed | ISO 3795 |
| Flash Ignition Temperature | 480 °C | ASTM D1929 |
| Self Ignition Temperature | 550 °C | ASTM D1929 |
| Electrical | Nominal Value | Test Method | |
| Surface Resistivity | 1.0E+16 ohms | IEC 60093 | |
| Volume Resistivity(23 °C) | 1.0E+16 ohms ·cm | IEC 60093 | |
| Electric Strength(23 °C;1 mm) | 34 kV/mm | IEC 60243-1 | |
| Relative Permittivity 100 Hz;23 °C 23 °C;1.0e+6 Hz |
3.10 3.00 |
IEC 60250 | |
| Dissipation Factor 100 Hz;23 °C 23 °C;1.0e+6 Hz |
5.0E-4 9.5E-3 |
IEC 60250 | |
| Comparative Tracking Index, Solution A | 250 V | IEC 60112 | |
| Comparative Tracking Index, Solution B | 125 V | IEC 60112 | |
| Optical | Nominal Value | Test Method | |
| Refractive Index, Method A | 1.584 | ISO 489 | |
| Transmittance | 90.0 % 90.0 % > 89.0 % > 89.0 % |
ISO 13468-2 | |
| 1.0e+3 2.0e+3 3.0e+3 4.0e+3 |
µm µm µm µm |
||
| Haze(3.0e+3 µm) | < 0.500 % | ISO 14782 | |
| Processing | Nominal Value |
| Drying Temperature - Dry Air Dryer<Injection> | 120 °C |
| Drying Time - Dry Air Dryer<Injection> | 4.0 hr |
| Suggested Max Moisture<Injection> | < 0.020 % |
| Suggested Shot Size<Injection> | 30 - 70 % |
| Rear Temperature<Injection> | 250 - 270 °C |
| Middle Temperature<injection> | 270 - 290 °C |
| Front Temperature<Injection> | 285 - 305 °C |
| Nozzle Temperature<Injection> | 270 - 305 °C |
| Processing Temp, Melt<Injection> | 280 - 320 °C |
| Mold Temperature<Injection> | 70 - 110 °C |
| Back Pressure<Injection> | 10.0 - 20.0 MPa |
| Vent Depth <Injection> | 0.025 - 0.075 mm |
| Standard Melt Temperature<Injection> | 300 °C |
| Hold Pressure<Injection> | 50 - 75 % |
| Peripheral Screw Speed <Injection> | 0.05 - 0.2 m/s |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}