Feature: | Oxidative Degradable |
---|---|
CAS No.: | 32131-17-2 |
Formula: | (C12h22n2o2)N |
Samples: |
BAG
|
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
RZL36 compound is based on Nylon 66 resin containing 30% milled glass 15% PTFE PA66
https://forever-plastics.en.made-in-china.com/product/rJwRvlcdZpWD/China-Nylon-PA6-GF33-PA66-Granules-PA6-with-30GF-Polyamide-PA66-30-GF-PA6-Material.html Heat-conducting nylon
Product Description | |||||
RZL36 compound is based on Nylon 6/6 resin containing 30% milled glass, 15% PTFE. Added features of this grade include: Wear Resistant, Dimensional Control. | |||||
General | |||||
Form | Resin Pellets | ||||
Filler 15 % PTFE 30 % Milled Glass Fiber | |||||
Feature | Low Warpage Internally Lubricated |
Good Dimensional Abrasion Resistant | |||
Uses Consumer | Electrical | Building and Construction | |||
Physical | Nominal Value | Test Method | |||
Mold Shrinkage, Flow | 1.2 % | Method | |||
Density / Specific Gravity | 1.51 g/cm³ | ISO 1183 | |||
Mechanical | Nominal Value | Test Method | |||
Izod Impact, Unnotched(80*10*4;23 °C) | 20 kJ/m² | ISO 180/1U | |||
Izod Impact, Notched(80*10*4;23 °C) | 4 kJ/m² | ISO 180/1A | |||
Tensile Stress, Yield(5 mm/min) | 54 MPa | ISO 527 | |||
Tensile Strain, Yield(5 mm/min) | 2.1 % | ISO 527 | |||
Tensile Modulus(1 mm/min) | 4800 MPa | ISO 527 | |||
Flexural Stress, Yield(2 mm/min) | 94 MPa | ISO 178 | |||
Flexural Modulus(2 mm/min) | 4300 MPa | ISO 178 | |||
Thermal | Nominal Value | Test Method | |||
CTE, Flow(23°C to 60°C) | 5.3E-05 1/°C | ISO 11359-2 | |||
CTE, XFlow(23°C to 60°C) | 7.0E-05 1/°C | ISO 11359-2 | |||
HDT/Bf(0.45) | 240 °C | ISO 75/Bf | |||
HDT/Af(1.8) | 121 °C | ISO 75/Af | |||
Processing | Nominal Value | ||||
Drying Temperature<Injection> | 80 °C | ||||
Drying Time<Injection> | 4 hrs | ||||
Maximum Moisture Content<Injection> | 0.15 - 0.25 % | ||||
Melt Temperature<Injection> | 280 - 305 °C | ||||
Front, Zone 3 Temperature<Injection> | 295 - 305 °C | ||||
Middle, Zone 2 Temperature<Injection> | 280 - 295 °C | ||||
Rear, Zone 1 Temperature<Injection> | 265 - 275 °C | ||||
Mold Temperature<Injection> | 95 - 110 °C | ||||
Back Pressure<Injection> | 0.2 - 0.3 MPa | ||||
Screw Speed <Injection> | 30 - 60 rpm |
Forever Co.,Ltd