Feature: | Plastics |
---|---|
CAS No.: | 25766-59-0 |
Formula: | C6h4c(CH3)2c6h4oco2-]N |
Samples: |
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
Product Description | ||||||
XHT1171 is an 85 MVR high flow, high heat polycarbonate copolymer enabling high aesthetics, thin wall and complex designs. It is available in a range of opaque colors. | ||||||
General | ||||||
Form Resin Pellets | ||||||
Feature Excellent Processability Good Thermal | ||||||
Automotive Consumer | Healthcare | |||||
Uses Packaging Industria | Electrical | |||||
Building and Construction Mass Transportation | ||||||
Physical Nominal Value | Test Method | |||||
Density / Specific Gravity 1.2 1.2 g/cm³ |
ASTM D792 ISO 1183 |
|||||
Mold Shrinkage, Flow(3.2 mm) 0.6 - 0.9 % | Method | |||||
Melt Flow Rate[MFR] | ASTM D1238 | |||||
300 °C;2.16 kgf 37 g/10min | ||||||
330 °C;2.16 kgf 90 g/10min | ||||||
Water Absorption(23 °C;saturated) 0.25 % | ISO 62-1 | |||||
Moisture Absorption(50% RH;23 °C) 0.25 % | ISO 62 | |||||
Melt Volume Rate, MVR | ISO 1133 | |||||
2.16 kg;MVR at 300 °C 33 cm³/10 min | ||||||
2.16 kg;330 °C 85 cm³/10 min | ||||||
Hardness, Rockwell R 125 | ISO 2039-2 | |||||
Mechanical Nominal Value | Test Method | |||||
Izod Impact, Unnotched | ASTM D4812 | |||||
23 °C NB J/m | ||||||
-30 °C NB J/m | ||||||
Izod Impact, Notched | ASTM D256 | |||||
23 °C 80 J/m | ||||||
-30 °C 75 J/m | ||||||
Unnotched Izod Impact Strength | ISO 180/1U | |||||
unnotched;80*10*3;23 °C 0 NB kJ/m² | ||||||
unnotched;80*10*3;-30 °C 0 NB kJ/m² | ||||||
Notched Izod Impact Strength notched;80*10*3;23 °C 0 notched;80*10*3;-30 °C 0 |
9 kJ/m² 9 kJ/m² |
ISO 180/1A | ||||
C harpy Impact, V-Notched 23 °C;Edgew;80*10*3;sp =62mm 0 -30 °C;Edgew;80*10*3;sp =62mm 0 |
10 kJ/m² 10 kJ/m² |
ISO 179 1eA | ||||
C harpy Impact, Unnotched 23 °C;Edgew;80*10*3;sp =62mm 0 -30 °C;Edgew;80*10*3;sp =62mm 0 |
NB kJ/m² NB kJ/m² |
ISO 179 1eU | ||||
Tensile Stress, Yield | ||||||
50 mm/min;Type I | 70 MPa | ASTM D638 | ||||
50 mm/min | 70 MPa | ISO 527 | ||||
Tensile Stress, Break | ||||||
50 mm/min;Type I | 60 MPa | ASTM D638 | ||||
50 mm/min | 60 MPa | ISO 527 | ||||
Tensile Strain, Yield | ||||||
50 mm/min;Type I | 7 % | ASTM D638 | ||||
50 mm/min | 7 % | ISO 527 | ||||
Tensile Strain, Break | ||||||
50 mm/min;Type I | > 25 % | ASTM D638 | ||||
50 mm/min | > 55 % | ISO 527 | ||||
Tensile Modulus | ||||||
50 mm/min | 2450 MPa | ASTM D638 | ||||
1 mm/min | 2400 MPa | ISO 527 | ||||
Flexural Stress, Yield | ||||||
1.3 mm/min;50 mm;span | 110 MPa | ASTM D790 | ||||
2 mm/min | 105 MPa | ISO 178 | ||||
Flexural Modulus | ||||||
1.3 mm/min;50 mm;span | 2600 MPa | ASTM D790 | ||||
2 mm/min | 2350 MPa | ISO 178 | ||||
Ball Indentation Hardness(H358/30) | 145 MPa | ISO 2039-1 | ||||
Thermal | Nominal Value | Test Method | ||||
Vicat Softening Temperature | ||||||
Rate B/50 | 155 °C | ASTM D1525 | ||||
Rate B/120 | 156 °C | ASTM D1525 | ||||
Rate B/50 | 155 °C | ISO 306 | ||||
Rate B/120 | 158 °C | ISO 306 | ||||
Heat Deflection Temperature[HDT], Unannealed 0.45 MPa;3.2 mm 3.2 mm;1.82 MPa |
150 °C 138 °C |
ASTM D648 | ||||
CTE, Flow | ||||||
-40 - 40 °C | 6.0E-05 1/°C | ASTM E831 | ||||
-40 - 40 °C | 6.0E-05 1/°C | ISO 11359-2 | ||||
CTE, XFlow | ||||||
-40 - 40 °C | 6.0E-05 1/°C | ASTM E831 | ||||
-40 - 40 °C | 6.0E-05 1/°C | ISO 11359-2 | ||||
Thermal Conductivity @ 25 °C | 0.2 W/m-K | ASTM C177 | ||||
Ball Pressure Test(125°C +/- 2°C) | PASSES | IEC 60695-10-2 | ||||
HDT/Bf(0.45) | 150 °C | ISO 75/Bf | ||||
HDT/Af(1.8) | 138 °C | ISO 75/Af | ||||
Metallized Haze Pass At 1.5Mm | 145 °C | Method | ||||
Processing | Nominal Value | |||||
Drying Temperature<Injection> | 130 °C | |||||
Drying Time<Injection> | 4 - 6 hrs | |||||
Maximum Moisture Content<Injection> | 0.02 % | |||||
Melt Temperature<Injection> | 290 - 335 °C | |||||
Nozzle Temperature<Injection> | 285 - 330 °C | |||||
Front, Zone 3 Temperature<Injection> | 290 - 335 °C | |||||
Middle, Zone 2 Temperature<Injection> | 280 - 325 °C | |||||
Rear, Zone 1 Temperature<Injection> | 270 - 315 °C | |||||
Mold Temperature<Injection> | 85 - 130 °C | |||||
Back Pressure<Injection> | 0.3 - 0.7 MPa | |||||
Screw Speed <Injection> | 40 - 90 rpm | |||||
Shot To Cylinder Size<Injection> | 40 - 60 % | |||||
Vent Depth <Injection> | 0.025 - 0.08 mm |
Suppliers with verified business licenses