Feature: | Oxidative Degradable |
---|---|
CAS No.: | 32131-17-2 |
Formula: | (C12h22n2o2)N |
Samples: |
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
High Temperature Flame Retardant PA epoxy resin Heat-Conducting Nylon
https://forever-plastics.en.made-in-china.com/product/rJwRvlcdZpWD/China-Nylon-PA6-GF33-PA66-Granules-PA6-with-30GF-Polyamide-PA66-30-GF-PA6-Material.html Heat-conducting nylon
Product Description | |||
Thermal Management Compounds have been engineered to combine the heat transfer and cooling capabilities of metals with the design freedom, weight reduction and cost advantages of thermoplastics. These materials provide the benefits of proprietary conductive additive technologies and the performance of select engineering thermoplastic resins. Therma-Tech compounds have been shown to improve thermal conductivity up to 100-times that of conventional plastics and can be used in a wide range of thermal management applications. |
|||
General | |||
Form Resin Pellets | |||
Feature Electrically Conductive Thermally Conductive | |||
Automotive Under The H d | |||
Uses oo | Consumer | Housing | |
Electrical | |||
Physical | Nominal Value | Test Method | |
Density / Specific Gravity | 1.65 g/cm³ | ASTM D792 | |
Mold Shrinkage, MD | 0.20 - 0.50 % | ASTM D955 | |
Mechanical | Nominal Value | Test Method | |
Tensile Modulus(23 0 °C) | 20700 MPa | ASTM D638 | |
Tensile Strength, Break(23 0 °C) | 62.0 MPa | ASTM D638 | |
Tensile Elongation, Break(23 0 °C) | 0.50 - 1.0 % | ASTM D638 | |
Flexural Modulus(23 0 °C) | 16600 MPa | ASTM D790 | |
Flexural Strength(23 0 °C) | 97 MPa | ASTM D790 | |
Notched Izod Impact(6.4 mm) | 32 J/m | ASTM D256 | |
Thermal | Nominal Value | Test Method | |
Thermal Conductivity, In Plane | 19 - 21 W/m-K | ASTM E1461 | |
Electrical | Nominal Value | Test Method | |
Surface Resistivity | < 1.0E+5 ohms | ASTM D257 | |
Processing | Nominal Value | ||
Drying Temperature | 80 - 90 °C | ||
Drying Time | 4.0 - 6.0 hr | ||
Suggested Max Moisture | 0.20 % | ||
Melt Temperature | 275 - 300 °C | ||
Mold Temperature | 80 - 105 °C |
Forever Co.,Ltd
Suppliers with verified business licenses