CAS No.: | 9002-98-6 |
---|---|
Formula: | C39h30n2o6 |
EINECS: | 205-793-9 |
Samples: |
BAG
|
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
Product Description | |||||||||
10% Glass fiber filled, enhanced flow Polyetherimide (Tg 217C). UL94 V0 and 5VA listing. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO 10993 or USP Class VI), food contact compliant; Steam, Gamma, EtO, and E-beam sterilizable. | |||||||||
General | |||||||||
Form | Resin Pellets | ||||||||
Filler | 10 % Glass Fiber | ||||||||
Feature |
Biocompatible Chemical Resistant Good Dimensional Hydrolysis Resistance Low Smoke Gamma Sterilizable |
Steam Sterilization E-Beam Good Thermal Amorphous Low Creep Sensitivity Eto And E-Beam Sterilizable |
Low Shrinkage Fda Good Hardness Good Mechanicals Good Metal Adhesion |
||||||
UL Yellow Card E121562-101082080 | |||||||||
Uses Consumer | Healthcare | ||||||||
Physical | Nominal Value | Test Method | |||||||
Density / Specific Gravity | 1.34 1.42 g/cm³ |
ASTM D792 ISO 1183 |
|||||||
Mold Shrinkage, Flow(3.2 mm) | 0.2 - 0.4 % | Method | |||||||
Melt Flow Rate[MFR](337 °C;6.6 kgf) | 11.3 g/10min | ASTM D1238 | |||||||
Water Absorption(23 °C;saturated) | 0.9 % | ISO 62-1 | |||||||
Moisture Absorption(50% RH;23 °C) | 0.5 % | ISO 62 | |||||||
Mechanical | Nominal Value | Test Method | |||||||
Izod Impact, Notched | |||||||||
23 °C | 48 J/m | ASTM D256 | |||||||
-30 °C | 64 J/m | ASTM D256 | |||||||
80*10*4;23 °C | 64 kJ/m² | ISO 180/1A | |||||||
80*10*4;-30 °C | 70 kJ/m² | ISO 180/1A | |||||||
Instrumented Dart Impact, Total Energy(23 °C) | 8 J | ASTM D3763 | |||||||
C harpy Impact, V-Notched(23 °C;Edgew;80*10*4;sp =62 mm 0) | 65 kJ/m² | ISO 179 1eA | |||||||
Tensile Stress, Yield | |||||||||
5 mm/min;Type I | 114 MPa | ASTM D638 | |||||||
5 mm/min | 165 MPa | ISO 527 | |||||||
Tensile Stress, Break | |||||||||
5 mm/min;Type I | 115 MPa | ASTM D638 | |||||||
5 mm/min | 165 MPa | ISO 527 | |||||||
Tensile Strain, Break | |||||||||
5 mm/min;Type I | 6 % | ASTM D638 | |||||||
5 mm/min | 2 % | ISO 527 | |||||||
Tensile Modulus | |||||||||
5 mm/min | 4610 MPa | ASTM D638 | |||||||
1 mm/min | 9500 MPa | ISO 527 | |||||||
Flexural Stress, Yield | |||||||||
1.3 mm/min;50 mm;span | 225 MPa | ASTM D790 | |||||||
2 mm/min | 228 MPa | ISO 178 | |||||||
Flexural Modulus | |||||||||
1.3 mm/min;50 mm;span | 6850 MPa | ASTM D790 | |||||||
2 mm/min | 6890 MPa | ISO 178 | |||||||
Tensile Strain, Yield(5 mm/min) | 2 % | ISO 527 | |||||||
Thermal | Nominal Value | Test Method | |||||||
UL Recognized ≥ 1.9 mm ≥ 0.25 mm |
5VA V-0 |
UL 94 | |||||||
Vicat Softening Temperature Rate B/50 Rate B/50 Rate B/120 |
220 °C 220 °C 213 °C |
ASTM D1525 ISO 306 ISO 306 |
|||||||
Heat Deflection Temperature[HDT], Unannealed(1.82 MPa;6.4 mm) | 207 °C | ASTM D648 | |||||||
CTE, Flow -40 - 40 °C -40 - 40 °C |
2.5e-05 1/°C 2.5e-05 1/°C |
ASTM E831 ISO 11359-2 |
|||||||
CTE, XFlow -40 - 40 °C -40 - 40 °C |
5.0E-05 1/°C 5.0E-05 1/°C |
ASTM E831 ISO 11359-2 |
|||||||
HDT/Af(1.8) | 205 °C | ISO 75/Af | |||||||
Relative Temp Index, Elec | 170 °C | UL 746B | |||||||
Relative Temp Index, Mechanical with Impact | 170 °C | UL 746B | |||||||
Relative Temp Index, Mechanical without Impact | 170 °C | UL 746B | |||||||
Electrical | Nominal Value | Test Method | |||||||
Comparative Tracking Index, CTI | PLC4 | UL 746A | |||||||
Hot-wire Ignition, HWI ≥ 3 mm ≥ 1.5 mm |
PLC 1 PLC 2 |
UL 746A | |||||||
High Amp Arc Ignition, HAI ≥ 1.5 mm ≥ 3 mm |
PLC 3 PLC4 |
UL 746A | |||||||
High Voltage Arc Tracking Rate, HVTR | PLC 2 | UL 746A | |||||||
Arc Resistance, Tungsten Electrode | PLC 6 | ASTM D495 | |||||||
Processing | Nominal Value | ||||||||
Drying Temperature<Injection> | 150 °C | ||||||||
Drying Time<Injection> | 4 - 6 hrs | ||||||||
Drying Time, Cumulative<Injection> | 24 hrs | ||||||||
Maximum Moisture Content<Injection> | 0.02 % | ||||||||
Melt Temperature<Injection> | 350 - 400 °C | ||||||||
Nozzle Temperature<Injection> | 345 - 400 °C | ||||||||
Front, Zone 3 Temperature<Injection> | 345 - 400 °C | ||||||||
Middle, Zone 2 Temperature<Injection> | 340 - 400 °C | ||||||||
Rear, Zone 1 Temperature<Injection> | 330 - 400 °C | ||||||||
Mold Temperature<Injection> | 135 - 165 °C | ||||||||
Back Pressure<Injection> | 0.3 - 0.7 MPa | ||||||||
Screw Speed <Injection> | 40 - 70 rpm | ||||||||
Shot To Cylinder Size<Injection> | 40 - 60 % | ||||||||
Vent Depth <Injection> | 0.025 - 0.076 mm |
Dongguan FOREVER Co., Ltd. Was founded in 2005 and is a national high-tech enterprise and national-level specialized giant enterprise dedicated to the research and production of polymer composite modified materials. With an annual capacity of 100, 000 tons of modified engineering plastics. Since its establishment, the company has been committed to the research of high-performance composite materials such as modified PC, PC/ABS, PBT, PA6, etc. Its products have been widely used in industries such as LED lighting, consumer electronics, new energy, security equipment, and small household appliances, providing customers with efficient delivery experience, ultimate price advantages, and strict quality assurance, contributing to the creation of a green and environmentally friendly world.
Dongguan FOREVER Co., Ltd's main products has obtained UL certification for RTI authorized temperature, outdoor weather resistance F1 and 5VA flame retardancy grades, as well as recycled-certified post-consumer low-carbon circulation products. Dongguan FOREVER Co., Ltd's products are highly recognized by customers worldwide for their reliable quality, excellent performance, and superior cost-effectiveness.
With a strong focus on research and development, Dongguan FOREVER Co., Ltd. Has established an advanced technology research and development center, equipped with state-of-the-art testing and analysis equipment and a professional R&D team that has accumulated rich experience in the field of polymer composite modified materials. Dongguan FOREVER Co., Ltd also maintains close partnerships with renowned universities and research institutions to stay at the forefront of technology and drive innovation in the industry
Suppliers with verified business licenses