Feature: | Oxidative Degradable |
---|---|
CAS No.: | 32131-17-2 |
Formula: | (C12h22n2o2)N |
Samples: |
BAG
|
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
polyphthalamide (PPA) resin designed to possess 15% glass-fiber reinforced grades
https://forever-plastics.en.made-in-china.com/product/rJwRvlcdZpWD/China-Nylon-PA6-GF33-PA66-Granules-PA6-with-30GF-Polyamide-PA66-30-GF-PA6-Material.html Heat-conducting nylon
AT-6115 HS is a 15% glass-fiber reinforced, toughened grade of polyphthalamide (PPA) resin designed to possess more elongation than other 15% glass-fiber reinforced grades of Amodel resin. This grade was developed for automotive snap-fit electronic connectors. It offers high flow and short molding cycles. Black: AT- 6115 HS BK 324 Natural: AT-6115 HS NT |
||||
General | ||||
Form | Resin Pellets | |||
Filler | 15 % Glass Fiber | |||
Feature | Excellent Processability Good Thermal Internally Lubricated High Elongation | High Impact | ||
UL Yellow Card | E95746-458902 | |||
Uses Metal Replacement |
Hood Automotive |
Industrial Parts Connector |
||
Housing | Valves/Valve Parts | Mechanical Parts | ||
Physical | Nominal Value | Test Method | ||
Density, dry | 1.22 g/cm³ | ISO 1183/A | ||
Dry: Molding Shrinkage, Flow | 1.0 % | ASTM D955 | ||
Dry: Molding Shrinkage, Across Flow | 1.1 % | ASTM D955 | ||
Dry: Water Absorption(24 hr) | 0.20 % | ASTM D570 | ||
Mechanical | Nominal Value | Test Method | ||
Dry: Tensile Modulus | ||||
5380 MPa | ASTM D638 | |||
23 °C | 5200 MPa | ISO 527-2 | ||
100 °C | 3100 MPa | ISO 527-2 | ||
Condition: Tensile Modulus | 4200 MPa | ASTM D638 | ||
Dry: Tensile Stress, Break | ISO 527-2 | |||
23 °C | 126 MPa | |||
100 °C | 68.3 MPa | |||
Dry: Tensile Stress | 122 MPa | ASTM D638 | ||
Condition: Tensile Stress | 95.8 MPa | ASTM D638 | ||
Dry: Tensile Elongation, Break | 3.4 % | ASTM D638 | ||
23 °C | 4.1 % | ISO 527-2 | ||
100 °C | 7.7 % | ISO 527-2 | ||
Condition: Tensile Elongation, Break | 5.3 % | ASTM D638 | ||
Dry: Flexural Modulus | 4410 MPa | ASTM D790 | ||
23 °C | 4270 MPa | ISO 178 | ||
100 °C | 2340 MPa | ISO 178 | ||
Condition: Flexural Modulus | 3450 MPa | ASTM D790 | ||
Dry: Flexural Strength | 165 MPa | ASTM D790 | ||
23 °C | 170 MPa | ISO 178 | ||
100 °C | 66.9 MPa | ISO 178 | ||
Condition: Flexural Strength | 115 MPa | ASTM D790 | ||
Dry: Compressive Strength | 100 MPa | ASTM D695 | ||
Dry: Shear Strength | 56.5 MPa | ASTM D732 | ||
Condition: Shear Strength | 44.1 MPa | ASTM D732 | ||
Dry: Charpy Notched Impact Strength(23 °C) | 11 kJ/m² | ISO 179 1eA | ||
Dry: Charpy Unnotched Impact Strength(23 °C) | 76 kJ/m² | ISO 179 1eU | ||
Dry: Notched Izod Impact | 91 J/m | ASTM D256 | ||
23 °C | 12 kJ/m² | ISO 180/1A | ||
Izod Notched Impact: condition | 80 J/m | ASTM D256 | ||
Dry: Unnotched Izod Impact | 850 J/m | ASTM D256 | ||
23 °C | 55 kJ/m² | ISO 180/1U | ||
Thermal | Nominal Value | Test Method | ||
Dry: Heat Deflection Temperature, Unannealed 0.45 MPa 1.8 MPa |
298 °C 251 °C |
ISO 75-2/B ISO 75-2/A |
||
Dry: Heat Deflection Temperature, Annealed(1.8 MPa) | 260 °C | ASTM D648 | ||
Dry: Melting Temperature | 305 °C | ASTM D3418; ISO 11357-3 | ||
Dry: CLTE, Flow 0 - 100 °C 100 - 200 °C |
2.2E-5 cm/cm/°C 3.0E-5 cm/cm/°C |
ASTM E831 | ||
Dry: CLTE, Transverse 0 - 100 °C 100 - 200 °C |
9.0E-5 cm/cm/°C 1.2E-4 cm/cm/°C |
ASTM E831 | ||
Processing | Nominal Value | |||
Drying Temperature<Injection> | 110 °C | |||
Drying Time<Injection> | 4.0 hr | |||
Suggested Max Moisture<Injection> | 0.030 - 0.060 % | |||
Rear Temperature<Injection> | 316 - 324 °C | |||
Front Temperature<Injection> | 327 - 332 °C | |||
Processing Temp, Melt<Injection> | 321 - 335 °C | |||
Mold Temperature<Injection> | 66 - 93 °C | |||
Injection Rate<Injection> | 2 - 4 in/sec | |||
Holding Pressure<Injection> | 50 of injection pressure % |
Forever Co.,Ltd
Suppliers with verified business licenses