Feature: | Plastics |
---|---|
CAS No.: | 25766-59-0 |
Formula: | C6h4c(CH3)2c6h4oco2-]N |
Samples: |
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
Product Description | |||||
MVR (300°C/1.2 kg) 19 cm³/10 min; medical devices; suitable for ETO and steam sterilization at 121°C; biocompatible according to many ISO 10993-1 test requirements; low viscosity; injection molding - melt temperature 280 - 320°C; available in color code 000000 only | |||||
General | |||||
Form Resin Pellets | |||||
Biocompatible Medium-Low Viscosity Eto Sterilization | |||||
High Impact Good Optical Properties Steam Sterilization | |||||
Uses Medical Device | |||||
Physical Nominal Value Test Method | |||||
Density / Specific Gravity(23 °C) 1.20 g/cm³ ISO 1183 | |||||
Apparent Bulk Density, Pellets 0.66 g/cm³ ISO 60 | |||||
Melt Mass-Flow Rate, MFR(300 °C;1.2 kg) 20 g/10min ISO 1133 | |||||
Melt Volume-Flow Rate, MVR(300 °C;1.2 kg) 19 cm³/10 min ISO 1133 | |||||
Molding Shrinkage, Across Flow | |||||
0.50 - 0.70 % ISO 2577 | |||||
2 mm;500 bar;60x60x2mm;280 °C 0.65 % ISO 294-4 | |||||
Molding Shrinkage, Flow | |||||
0.50 - 0.70 % ISO 2577 | |||||
2 mm;500 bar;60x60x2mm 0.65 % ISO 294-4 | |||||
Water Absorption, Saturation(23 °C) 0.30 % ISO 62 | |||||
Water Absorption, Equilibrium(50% RH;23 °C) 0.12 % ISO 62 | |||||
Ball Indentation Hardness 113 MPa ISO 2039-1 | |||||
Mechanical Nominal Value | Test Method | ||||
Tensile Modulus(23 °C) 2350 MPa | ISO 527-2/1 | ||||
Tensile Stress, Yield(23 °C) 65.0 MPa | ISO 527-2/50 | ||||
Tensile Stress, Break(23 °C) 70.0 MPa | ISO 527-2/50 | ||||
Tensile Strain, Yield(23 °C) 6.3 % | ISO 527-2/50 | ||||
Tensile Strain, Break(23 °C) 120 % | ISO 527-2/50 | ||||
Nominal Tensile Strain at Break(23 °C) > 50 % | ISO 527-2/50 | ||||
Tensile creep modulus 1 hr 1.0e+3 hr |
2200 MPa 1900 MPa |
ISO 899-1 | |||
Flexural Modulus(2 mm/min;23 °C) 2350 MPa | ISO 178 | ||||
Flexural Stress 2 mm/min;23 °C 2 mm/min;3.5% Strain;23 °C |
96.0 MPa 72.0 MPa |
ISO 178 | |||
Flexural Strain at Flexural Strength(2 mm/min;23 °C) 7.0 % | ISO 178 | ||||
C harpy Notched Impact Strength, Complete Break(-30 °C;3 mm) | 14 kJ/m² | ISO 179 1eA | |||
C harpy Notched Impact Strength, Partial Break(23 °C;3 mm) | 65 kJ/m² | ISO 179 1eA | |||
C harpy Unnotched Impact Strength -60 °C -30 °C 23 °C |
No Break No Break No Break |
ISO 179 1eU | |||
Notched Izod Impact Strength, Complete Break(-30 °C;3 15 kJ/m² mm) |
ISO 180/1A | ||||
Notched Izod Impact Strength, Partial Break(23 °C;3 mm)65 kJ/m² | ISO 180/1A | ||||
Multi-Axial Instrumented Impact Energy -30 °C 23 °C |
65.0 J 55.0 J |
ISO 6603-2 | |||
Multi-Axial Instrumented Impact, Peak Force -30 °C 23 °C |
6000 N 5100 N |
ISO 6603-2 | |||
Thermal | Nominal Value | Test Method | |||
Heat Deflection Temperature, Unannealed 0.45 MPa 1.8 MPa |
139 °C 127 °C |
ISO 75-2/B ISO 75-2/A |
|||
Glass Transition Temperature(10 °C;min) | 147 °C | ISO 11357-2 | |||
Vicat Softening Temperature | 147 °C 148 °C |
ISO 306/B50 ISO 306/B120 |
|||
Ball Pressure Test(138 °C) | Pass | IEC 60695-10-2 | |||
CLTE, Flow(23 - 55 °C) | 6.5E-5 cm/cm/°C | ISO 11359-2 | |||
CLTE, Transverse(23 - 55 °C) | 6.5E-5 cm/cm/°C | ISO 11359-2 | |||
Thermal Conductivity, Across Flow(23 °C) | 0.20 W/m-K | ISO 8302 | |||
Flash Ignition Temperature | 480 °C | ASTM D1929 | |||
Self Ignition Temperature | 550 °C | ASTM D1929 | |||
Optical | Nominal Value | Test Method | |||
Refractive Index, Method A | 1.586 | ISO 489 | |||
Transmittance | 89.0 % 89.0 % 88.0 % 87.0 % |
ISO 13468-2 | |||
1.0e+3 2.0e+3 3.0e+3 4.0e+3 |
µm µm µm µm |
||||
Haze(3.0e+3 µm) | < 0.800 % | ISO 14782 |
Suppliers with verified business licenses