Feature: | Oxidative Degradable |
---|---|
Material: | Polyamide(Nylon 6.66)/PA |
Usage: | General Plastics, Engineering Plastics, Specialty Plastics |
Samples: |
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
LEXAN BFL4000U Polycarbonate (PC) is an injection moldable non-chlorinated/brominated, unfilled, flame retardant grade with high flow. It is UV stabilized, light reflective and has an MVR of 22 (300°C/1.2kg) and a UL94 [email protected].
Product Description | ||||
LEXAN BFL4000U Polycarbonate (PC) is an injection moldable non-chlorinated/brominated, unfilled, flame retardant grade with high flow. It is UV stabilized, light reflective and has an MVR of 22 (300°C/1.2kg) and a UL94 V0@1.5mm. | ||||
General | ||||
Form | Resin Pellets | |||
Feature |
Outdoor Non-Chlorinated Diffusive |
Excellent Processability Good Surface Appearance |
Non-Brominated & Non- Chlorinated Flame Retardant High Reflection |
|
UL Yellow Card E207780-531362 | ||||
Automotive Electrical |
Consumer Building and Construction |
Industria Hydrocarbon and Energy |
||
Physical | Nominal Value | Test Method | ||
Specific Gravity | 1.38 | ASTM D792 | ||
Mold Shrinkage, Flow(3.2 mm) | 0.5 - 0.7 % | SABIC Method | ||
Melt Flow Rate[MFR](300 °C;1.2 kgf) | 24 g/10min | ASTM D1238 | ||
Density | 1.38 g/cm³ | ISO 1183 | ||
Water Absorption(23 °C;saturated) | 0.35 % | ISO 62-1 | ||
Moisture Absorption(50% RH;23 °C) | 0.15 % | ISO 62 | ||
Melt Volume Rate, MVR(1.2 kg;MVR at 300 °C) | 22 cm³/10 min | ISO 1133 |
Mechanical | Nominal Value | Test Method |
Izod Impact, Notched | ||
23 °C | 470 J/m | ASTM D256 |
-30 °C | 240 J/m | ASTM D256 |
80*10*4;23 °C | 30 kJ/m² | ISO 180/1A |
80*10*4;-30 °C | 20 kJ/m² | ISO 180/1A |
Instrumented Dart Impact, Total Energy(23 °C) | 68 J | ASTM D3763 |
Charpy Impact, V-Notched(23 °C;Edgew;80*10*4;sp=62 mm 0) | 30 kJ/m² | ISO 179 1eA |
Tensile Stress, Yield 5 mm/min;Type I 5 mm/min |
54 MPa 50 MPa |
ASTM D638 ISO 527 |
Tensile Stress, Break 5 mm/min;Type I 5 mm/min |
47 MPa 44 MPa |
ASTM D638 ISO 527 |
Tensile Strain, Yield 5 mm/min;Type I 5 mm/min |
5 % 6 % |
ASTM D638 ISO 527 |
Tensile Strain, Break 5 mm/min;Type I 5 mm/min |
56 % 74 % |
ASTM D638 ISO 527 |
Tensile Modulus 5 mm/min 1 mm/min |
2240 MPa 2040 MPa |
ASTM D638 ISO 527 |
Flexural Stress, Yield 1.3 mm/min;50 mm;span 2 mm/min |
90 MPa 83 MPa |
ASTM D790 ISO 178 |
Flexural Modulus 1.3 mm/min;50 mm;span 2 mm/min |
2050 MPa 2170 MPa |
ASTM D790 ISO 178 |
Thermal | Nominal Value | Test Method |
UL Recognized(≥ 1.5 mm) | V-0 | UL 94 |
Vicat Softening Temperature | ||
Rate B/50 | 136 °C | ASTM D1525 |
Rate B/50 | 137 °C | ISO 306 |
Rate B/120 | 139 °C | ISO 306 |
Heat Deflection Temperature[HDT], Unannealed 0.45 MPa;3.2 mm 0.45 MPa;6.4 mm 1.82 MPa;6.4 mm |
131 °C 134 °C 124 °C |
ASTM D648 |
Heat Deflection Temperature[HDT], Annealed(3.2 mm;1 82 MPa) | 115 °C | ASTM D648 |
CTE, Flow -40 - 40 °C -40 - 40 °C |
7.5e-05 1/°C 7.5e-05 1/°C |
ASTM E831 ISO 11359-2 |
CTE, XFlow -40 - 40 °C -40 - 40 °C |
7.5e-05 1/°C 7.5e-05 1/°C |
ASTM E831 ISO 11359-2 |
HDT/Bf(0.45) | 130 °C | ISO 75/Bf |
HDT/Af(1.8) | 115 °C | ISO 75/Af |
Relative Temp Index, Elec | 120 °C | UL 746B |
Relative Temp Index, Mechanical with Impact | 105 °C | UL 746B |
Relative Temp Index, Mechanical without Impact | 120 °C | UL 746B |
Electrical | Nominal Value | Test Method |
Hot-wire Ignition, HWI(1.5 mm) | PLC 2 | UL 746A |
High Amp Arc Ignition, HAI(1.5 mm) | PLC 2 | UL 746A |
Processing | Nominal Value |
Drying Temperature<Injection> | 120 °C |
Drying Time<Injection> | 3 - 4 hrs |
Drying Time, Cumulative<Injection> | 48 hrs |
Maximum Moisture Content<Injection> | 0.02 % |
Melt Temperature<Injection> | 270 - 295 °C |
Nozzle Temperature<Injection> | 265 - 290 °C |
Front, Zone 3 Temperature<Injection> | 270 - 295 °C |
Middle, Zone 2 Temperature<Injection> | 260 - 280 °C |
Rear, Zone 1 Temperature<Injection> | 250 - 270 °C |
Mold Temperature<Injection> | 70 - 95 °C |
Back Pressure<Injection> | 0.3 - 0.7 MPa |
Screw Speed<Injection> | 40 - 70 rpm |
Shot To Cylinder Size<Injection> | 40 - 60 % |
Vent Depth<Injection> | 0.025 - 0.076 mm |
Suppliers with verified business licenses