Feature: | Plastics |
---|---|
CAS No.: | 25766-59-0 |
Formula: | C6h4c(CH3)2c6h4oco2-]N |
Samples: |
BAG
|
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
Polycarbonate (PC) is an injection moldable non-chlorinated/brominated flame retardant grade
https://forever-plastics.en.made-in-china.com/product-list-1.html
Product Description | ||||||
505RU Polycarbonate (PC) is an injection moldable non-chlorinated/brominated flame retardant grade that is 10% glass fiber filled. It It is UV stabilized and has a UL94 [email protected] rating and is available in various opaque color options. This is an alternative to 503R, 503R, 503RS. | ||||||
General | ||||||
Form | Resin Pellets | |||||
Filler | 10 % Glass Fiber | |||||
Feature | Outdoor F1 Non-Chlorinated |
Non-Brominated | ||||
UL Yellow Card E207780-100059995 | ||||||
Uses | Appliances Energy Storage |
Lighting Applications Electronic Displays | ||||
Physical | Nominal Value | Test Method | ||||
Density / Specific Gravity | 1.26 g/cm³ | ASTM D792;ISO 1183 | ||||
Melt Mass-Flow Rate, MFR(300 °C;1.2 kg) | 8.0 g/10min | ASTM D1238 | ||||
Melt Volume-Flow Rate, MVR(300 °C;1.2 kg) | 7.00 cm³/10 min | ISO 1133 | ||||
Molding Shrinkage, Flow(3.2 mm) | 0.40 - 0.60 % | Internal Method | ||||
Water Absorption, Saturation(23 °C) | 0.30 % | ISO 62 | ||||
Water Absorption, Equilibrium(50% RH;23 °C) | 0.15 % | ISO 62 | ||||
Outdoor Suitability | f1 | UL 746C | ||||
Mechanical | Nominal Value | Test Method | ||||
Tensile Modulus | ||||||
5 mm/min | 3600 MPa | ASTM D638 | ||||
3500 MPa | ISO 527-2/1 | |||||
Tensile Strength, Yield | ||||||
5 mm/min;Type I | 74.0 MPa | ASTM D638 | ||||
72.0 MPa | ISO 527-2/5 | |||||
Tensile Strength, Break | ||||||
5 mm/min;Type I | 62.0 MPa | ASTM D638 | ||||
60.0 MPa | ISO 527-2/5 | |||||
Tensile Elongation, Yield | ||||||
5 mm/min;Type I | 4.0 % | ASTM D638 | ||||
3.0 % | ISO 527-2/5 | |||||
Tensile Elongation, Break 5 mm/min;Type I |
6.0 % 6.0 % |
ASTM D638 ISO 527-2/5 |
||||
Flexural Modulus 1.3 mm/min;50 mm;Span 2 mm/min |
3200 MPa 3500 MPa |
ASTM D790 ISO 178 |
||||
Flexural Stress, at Yield(2 mm/min) | 122 MPa | ISO 178 | ||||
Flexural Stress, Yield(1.3 mm/min;50 mm;Span) | 114 MPa | ASTM D790 | ||||
C harpy Notched Impact Strength -30 °C;80 23 °C;80 |
7.0 kJ/m² 10 kJ/m² |
ISO 179 1eA | ||||
C harpy Unnotched Impact Strength -30 °C;80 23 °C;80 |
No Break No Break |
ISO 179 1eU | ||||
Notched Izod Impact -30 °C 23 °C -30 °C;80*10*3 mm 23 °C;80*10*3 mm |
70 J/m 90 J/m 8.0 kJ/m² 10 kJ/m² |
ASTM D256 ASTM D256 ISO 180/1A ISO 180/1A |
||||
Unnotched Izod Impact 23 °C -30 °C;80*10*3 mm 23 °C;80*10*3 mm |
1200 J/m 73 kJ/m² No Break |
ASTM D4812 ISO 180/1U ISO 180/1U |
||||
Instrumented Dart Impact, Total Energy(23 °C) | 25.0 J | ASTM D3763 | ||||
Thermal | Nominal Value | Test Method | ||||
Deflection Temperature Under Load, Unannealed | ||||||
1.8 MPa;3.2 mm | 137 °C | ASTM D648 | ||||
80*10*4 mm;1.8 MPa;4 mm;64 mm;Span | 136 °C | ASTM D1525 | ||||
Vicat Softening Temperature | ||||||
50 °C/h;50 N;Rate A;Loading 2 | 149 °C 147 °C |
ISO 306 ISO 306/B50 |
||||
Ball Pressure Test(123 - 127 °C) | Pass | ISO 11359-2 | ||||
CLTE, Flow(-40 - 40 °C) | 5.0E-5 cm/cm/°C | ASTM E831 | ||||
CLTE, Transverse | ||||||
-40 - 40 °C | 7.4E-5 cm/cm/°C | ASTM E831 | ||||
-40 °C | 8.5E-5 cm/cm/°C | ISO 11359-2 | ||||
Flame Rating, Testing 0.75 mm 1.5 mm 3 mm 3 mm |
V-2 V-0 5VA 5VB |
UL 94 | ||||
Glow Wire Flammability Index(0.75 mm) | 960 °C | IEC 60695-2-12 | ||||
Glow Wire Ignition Temperature [GWIT] 1 mm 3 mm |
850 °C 875 °C |
IEC 60695-2-13 | ||||
Electrical | Nominal Value | Test Method | ||||
Comparative Tracking Index[CTI] | PLC 3 | UL 746 | ||||
Comparative Tracking Index | 175 V | IEC 60112 | ||||
High Amp Arc Ignition, HAI, Surface | PLC 0 | UL 746 | ||||
Hot-wire Ignition, HWI | PLC 3 | UL 746 | ||||
Processing | Nominal Value | |||||
Drying Temperature<Injection> | 120 °C | |||||
Drying Time<Injection> | 2.0 - 4.0 hr | |||||
Suggested Max Moisture<Injection> | 0.020 % | |||||
Hopper Temperature<Injection> | 60 - 80 °C | |||||
Rear Temperature<Injection> | 270 - 300 °C | |||||
Middle Temperature<injection> | 280 - 310 °C | |||||
Front Temperature<Injection> | 290 - 320 °C | |||||
Nozzle Temperature<Injection> | 280 - 310 °C | |||||
Processing Temp, Melt<Injection> | 290 - 320 °C | |||||
Mold Temperature<Injection> | 80 - 120 °C |
Forever Co.,Ltd
Suppliers with verified business licenses