Feature: | Oxidative Degradable |
---|---|
CAS No.: | 32131-17-2 |
Formula: | (C12h22n2o2)N |
Samples: |
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
Polyamide 6 (Nylon 6) compound 10% mineral filled flame retardant PA6
https://forever-plastics.en.made-in-china.com/product/rJwRvlcdZpWD/China-Nylon-PA6-GF33-PA66-Granules-PA6-with-30GF-Polyamide-PA66-30-GF-PA6-Material.html Heat-conducting nylon
Product Description | ||||
B3 M10 V2 is a Polyamide 6 (Nylon 6) compound, 10% mineral filled, flame retardant, halogen and red phosphorous free, UL listed V2. This compound is intended for injection molding. B3 M10 V2 is primarily designed for the Electrical and Electronic industry. It is also suitable for Automotive applications. | ||||
General | ||||
Form | Resin Pellets | |||
Filler | 10 % Mineral | |||
Feature |
Red Phosphorous Free | Non-Brominated & Non- Chlorinated Flame Retardant |
||
UL Yellow Card E86034-102512471 | ||||
Uses Automotive | Electrical | |||
Physical | Nominal Value | Test Method | ||
Density / Specific Gravity(23 °C) | 1.25 g/cm³ | ISO 1183 | ||
Molding Shrinkage, Across Flow(23 °C) | 1.3 % | ISO 294-4 | ||
Molding Shrinkage, Flow(23 °C) | 0.70 % | ISO 294-4 | ||
Water Absorption(24 hr;23 °C) | 1.5 % | ISO 62 | ||
Water Absorption, Saturation(23 °C) | 6.3 % | ISO 62 | ||
Mechanical | Nominal Value | Test Method | ||
Tensile Modulus(23 °C) | 3600 MPa | ISO 527-2 | ||
Tensile Stress, Yield(23 °C) | 70.0 MPa | ISO 527-2 | ||
Tensile Strain, Break(23 °C) | 3.5 % | ISO 527-2 | ||
C harpy Notched Impact Strength(23 °C) | 3.0 kJ/m² | ISO 179 1eA | ||
C harpy Unnotched Impact Strength(23 °C) | 45 kJ/m² | ISO 179 1eU | ||
Notched Izod Impact Strength(23 °C) | 3.5 kJ/m² | ISO 180/1A | ||
Thermal | Nominal Value | Test Method | ||
Heat Deflection Temperature, Unannealed 0.45 MPa 1.8 MPa |
190 °C 120 °C |
ISO 75-2/B ISO 75-2/A |
||
Continuous Use Temperature(2.0e+4 hr) | 105 °C | IEC 60216 | ||
Ball Pressure Test 125 °C 165 °C |
Pass Pass |
IEC 60695-10-2 | ||
Flame Rating 0.8 mm 1.6 mm 3.2 mm |
V-2 V-2 V-2 |
UL 94 | ||
Glow Wire Flammability Index 0.8 mm 3.2 mm |
960 °C 960 °C |
IEC 60695-2-12 | ||
Glow Wire Ignition Temperature [GWIT] 0.8 mm 3.2 mm |
750 °C 775 °C |
IEC 60695-2-13 | ||
Needle Flame Test 1 mm 2 mm |
Pass Pass |
IEC 60695-11-5 | ||
Electrical | Nominal Value | Test Method | ||
Surface Resistivity(23 °C) | 1.0E+13 ohms | IEC 60093 | ||
Volume Resistivity(23 °C) | 1.0e+15 ohms ·cm | IEC 60093 | ||
Electric Strength(2 mm) | 21 kV/mm | IEC 60243-1 | ||
Comparative Tracking Index, Solution A(3.2 mm) | 550 V | IEC 60112 |
Forever Co.,Ltd