Feature: | Plastics |
---|---|
CAS No.: | 63440-93-7 |
Formula: | C24h24o8 |
Samples: |
25kg/bag
|
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
Product Description | |||||
PBT-RG151 is a Poly butylene Terephthalate (PBT) material filled with 15% glass fiber. It is available in Asia Pacific or North America for injection molding. Important attributes of PBT-RG151 are: Flame Rated Flame Retardant Heat Resistant High Strength Typical applications include: Electrical/Electronic Applications Appliances Lighting Applications | |||||
General | |||||
Form | Resin Pellets | ||||
Filler | 15 % Glass Fiber | ||||
Feature | Good Thermal | Low Extractables Good Electrical Properties | |||
UL Yellow Card | E171666-100139762 | ||||
Uses | Appliance Components Lighting Applications Connector Electrical |
Bobbins | |||
Physical | Nominal Value | Test Method | |||
Density / Specific Gravity | 1.50 g/cm³ | ISO 1183 | |||
Molding Shrinkage, Across Flow | 1.2 % | ISO 2577 | |||
Molding Shrinkage, Flow | 0.60 % | ISO 2577 | |||
Water Absorption, Equilibrium(50% RH;23 °C) | 0.070 % | ISO 62 | |||
Rockwell Hardness, R-Scale | 118 | ISO 2039-2 | |||
Mechanical | Nominal Value | Test Method | |||
Tensile Stress | 95.0 MPa | ISO 527-2/10 | |||
Tensile Strain, Break | 3.4 % | ISO 527-2/10 | |||
Flexural Modulus(2 mm/min) | 5400 MPa | ISO 178 | |||
Flexural Stress(2 mm/min) | 145 MPa | ISO 178 | |||
Notched Izod Impact Strength(23 °C) | 6.2 kJ/m² | ISO 180 | |||
Thermal | Nominal Value | Test Method | |||
Heat Deflection Temperature, Unannealed | |||||
0.45 MPa | 215 °C | ISO 75-2/B | |||
1.8 MPa | 205 °C | ISO 75-2/A | |||
Flame Rating | V-0 | UL 94 | |||
Electrical | Nominal Value | Test Method | |||
Volume Resistivity | 1.0E+16 ohms ·cm | IEC 60093 | |||
Electric Strength, in Oil(2 mm) | 23 kV/mm | IEC 60243-1 | |||
Processing | Nominal Value | ||||
Drying Temperature<Injection> | 120 - 140 °C | ||||
Drying Time<Injection> | 4.0 - 6.0 hr | ||||
Rear Temperature<Injection> | 220 - 240 °C | ||||
Middle Temperature<injection> | 230 - 250 °C | ||||
Front Temperature<Injection> | 240 - 260 °C | ||||
Processing Temp, Melt<Injection> | 235 - 255 °C | ||||
Mold Temperature<Injection> | 40 - 120 °C | ||||
Injection Rate<Injection> | Moderate-Fast |
Suppliers with verified business licenses