Feature: | Oxidative Degradable |
---|---|
CAS No.: | 32131-17-2 |
Formula: | (C12h22n2o2)N |
Samples: |
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
PA6 compound is based on Nylon 6 resin containing proprietary thermal filler
https://forever-plastics.en.made-in-china.com/product/rJwRvlcdZpWD/China-Nylon-PA6-GF33-PA66-Granules-PA6-with-30GF-Polyamide-PA66-30-GF-PA6-Material.html Heat-conducting nylon
Product Description | |||||
PX13012 compound is based on Nylon 6 resin containing proprietary thermal filler. Added features of this grade include: Thermally Conductive, Electrically Insulative and Non-Brominated, Non-Chlorinated Flame Retardant. | |||||
General | |||||
Form | Resin Pellets | ||||
Feature |
Thermally Conductive | Non-Brominated & Non- Chlorinated Flame Retardant |
Non-Chlorinated Electrically Isolative |
||
UL Yellow Card E45329-101769086 | |||||
Uses | Consumer Industria Building and Construction |
Electrical | |||
Physical | Nominal Value | Test Method | |||
Molding Shrinkage, Flow, Tensile Bar | 0.7 % | Method | |||
Mold Shrinkage, Flow | |||||
24 hrs | 0.55 % | ASTM D955 | |||
24 hrs | 0.55 % | ISO 294 | |||
Mold Shrinkage, XFlow | |||||
24 hrs | 0.65 % | ASTM D955 | |||
24 hrs | 0.65 % | ISO 294 | |||
Density / Specific Gravity | 1.68 g/cm³ | ISO 1183 | |||
Water Absorption(24 hrs;23 °C) | 0.23 % | ISO 62-1 |
Mechanical | Nominal Value | Test Method |
Izod Impact, Unnotched | ||
23 °C | 152 J/m | ASTM D4812 |
80*10*4;23 °C | 9 kJ/m² | ISO 180/1U |
Izod Impact, Notched | ||
23 °C | 15 J/m | ASTM D256 |
80*10*4;23 °C | 3 kJ/m² | ISO 180/1A |
Tensile Stress, Yield(5 mm/min;Type I) | 68 MPa | ASTM D638 |
Tensile Strain, Break | ||
5 mm/min;Type I | 1.2 % | ASTM D638 |
5 mm/min | 1.1 % | ISO 527 |
Tensile Modulus | ||
5 mm/min | 1.0E+04 MPa | ASTM D638 |
1 mm/min | 1.3E+04 MPa | ISO 527 |
Flexural Stress, break(1.3 mm/min;50 mm;span) | 119 MPa | ASTM D790 |
Flexural Modulus | ||
1.3 mm/min;50 mm;span | 1.2E+04 MPa | ASTM D790 |
2 mm/min | 1.2E+04 MPa | ISO 178 |
Tensile Stress, Break(5 mm/min) | 75 MPa | ISO 527 |
Flexural Stress, Yield(2 mm/min) | 105 MPa | ISO 178 |
Thermal Nominal Value | Test Method | ||||
UL Recognized(≥ 0.8 mm) V-0 | UL 94 | ||||
Glow Wire Ignition Temperature [GWIT] 0.8 mm 1.6 mm 3 mm |
750 °C 775 °C 800 °C |
IEC 60695-2-13 | |||
Glow Wire Flammability Index 0.8 mm 1.6 mm 3 mm |
960 °C 960 °C 960 °C |
IEC 60695-2-12 | |||
Heat Deflection Temperature[HDT](0.45 MPa;3.2 mm) 203 °C | ASTM D648 | ||||
Heat Deflection Temperature[HDT], Unannealed(3.2 mm;1.82 MPa) | 137 °C | ASTM D648 | |||
CTE, Flow -40 - 40 °C -30°C to 80°C |
3.3E-05 3.9E-05 |
1/°C 1/°C |
ASTM E831 ISO 11359-2 |
||
CTE, XFlow -40 - 40 °C -30°C to 80°C |
4.4E-05 1/°C 5.5e-05 1/°C |
ASTM E831 ISO 11359-2 |
|||
Thermal conductivity through plane(60*60*3mm plaque) 1.2 W/m-K | ISO 22007-2 | ||||
Thermal conductivity in plane(60*60*3mm plaque) 5.5 W/m-K | ISO 22007-2 | ||||
Ball Pressure Test(165°C +/- 2°C) PASSES | IEC 60695-10-2 | ||||
HDT/Bf(0.45) 203 °C | ISO 75/Bf | ||||
HDT/Af(1.8) 160 °C | ISO 75/Af | ||||
Relative Temp Index, Elec 130 °C | UL 746B | ||||
Relative Temp Index, Mechanical with Impact 100 °C | UL 746B | ||||
Relative Temp Index, Mechanical without Impact 130 °C | UL 746B | ||||
Electrical | Nominal Value | Test Method | |||
Surface Resistivity | 4.0E+14 ohms | ASTM D257 | |||
Dielectric Strength, in Oil(1.6 mm) | 7.2 kV/mm | ASTM D149 | |||
Dielectric Strength(1.6 mm) | 6.1 kV/mm | IEC 60243-1 | |||
Comparative Tracking Index, CTI | PLC 0 | UL 746A | |||
Comparative Tracking Index | 600 V | IEC 60112 | |||
Hot-wire Ignition, HWI( ≥ 0.8 mm) | PLC 0 | UL 746A | |||
High Amp Arc Ignition, HAI( ≥ 0.8 mm) | PLC 0 | UL 746A | |||
Processing | Nominal Value | ||||
Drying Temperature<Injection> | 80 °C | ||||
Drying Time<Injection> | 4 hrs | ||||
Maximum Moisture Content<Injection> | 0.25 % | ||||
Minimum Moisture Content<Injection> | 0.15 % | ||||
Melt Temperature<Injection> | 270 - 295 °C | ||||
Front, Zone 3 Temperature<Injection> | 270 - 290 °C | ||||
Middle, Zone 2 Temperature<Injection> | 270 - 290 °C | ||||
Rear, Zone 1 Temperature<Injection> | 260 - 275 °C | ||||
Mold Temperature<Injection> | 85 - 100 °C | ||||
Back Pressure<Injection> | 0.2 - 0.3 MPa | ||||
Screw Speed <Injection> | 20 - 60 rpm |
Forever Co.,Ltd
Suppliers with verified business licenses