Feature: | Oxidative Degradable |
---|---|
CAS No.: | 32131-17-2 |
Formula: | (C12h22n2o2)N |
Samples: |
BAG
|
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
polyphthalamide (PPA) is a 35% glass reinforced resin that is heat stabilized
https://forever-plastics.en.made-in-china.com/product/rJwRvlcdZpWD/China-Nylon-PA6-GF33-PA66-Granules-PA6-with-30GF-Polyamide-PA66-30-GF-PA6-Material.html Heat-conducting nylon
Product Description | ||||
A-6135 HN polyphthalamide (PPA) is a 35% glass reinforced resin that is heat stabilized, non-lubricated and hot-water moldable. Key properties of the resin are high heat resistance, high strength and stiffness over a broad temperature range. It also exhibits low moisture absorption excellent chemical resistance and excellent electrical properties. A-6135 HN resin is ideal for automotive electrical and electronic applications, including connectors, sockets, switches and sensors. It is also a good choice for under-hood enclosures that protect critical control systems such as anti lock brakes, traction control, steering, electronic engine control, transmission and chassis control units. Black: A-6135 HN BK 324 | ||||
General | ||||
Form Resin Pellets | ||||
Filler 35 % Glass Fiber | ||||
Chemical Resistant | Creep Resistance | Excellent Processability | ||
Feature Enhanced Stiffness | Good Thermal | Good Hardness | ||
Hot Water Moldability | Low Moisture | |||
Automotive Electronics | Automotive Under The Hood | Industrial Applications Industrial Parts |
||
Uses |
Lawn And Garden Equipment |
Metal Replacement | Automotive | |
Connector | Electrical Engineering | |||
Valves/Valve Parts | Mechanical Parts | |||
Physical | Nominal Value | Test Method | ||
Density, dry | 1.45 g/cm³ | ISO 1183/A | ||
Dry: Molding Shrinkage, Flow | ||||
0.60 % | ASTM D955 | |||
0.50 % | ISO 294-4 | |||
Dry: Molding Shrinkage, Across Flow | ||||
0.90 % | ASTM D955 | |||
1.0 % | ISO 294-4 | |||
Dry: Water Absorption | ||||
24 hr | 0.30 % | ASTM D570 | ||
24 hr;23 °C | 0.29 % | ISO 62 | ||
Dry: Rockwell Hardness, R-Scale | 125 | ASTM D785 | ||
Mechanical | Nominal Value | Test Method | ||
Dry: Tensile Modulus | ASTM D638 | |||
23 °C | 13800 MPa | ISO 527-2 | ||
100 °C | 11500 MPa | ISO 527-2 | ||
150 °C | 7310 MPa | ISO 527-2 | ||
175 °C | 6270 MPa | ISO 527-2 | ||
5310 MPa |
Condition: Tensile Modulus | 12200 MPa | ASTM D638 | ||
Dry: Tensile Stress, Break 23 °C 100 °C 150 °C 175 °C |
211 MPa 121 MPa 92.4 MPa 82.0 MPa |
ISO 527-2 | ||
Dry: Tensile Stress | 203 MPa | ASTM D638 | ||
Condition: Tensile Stress | 176 MPa | ASTM D638 | ||
Dry: Tensile Elongation, Break | 1.9 % |
ASTM D638 |
||
23 °C | 2.0 % | ISO 527-2 | ||
100 °C | 4.3 % | ISO 527-2 | ||
150 °C | 4.9 % | ISO 527-2 | ||
175 °C | 4.7 % | ISO 527-2 | ||
Condition: Tensile Elongation, Break | 2.1 % | ASTM D638 | ||
Dry: Flexural Modulus | 11400 MPa |
ASTM D790 |
||
23 °C | 11400 MPa | ISO 178 | ||
100 °C | 6600 MPa | ISO 178 | ||
150 °C | 4900 MPa | ISO 178 | ||
175 °C | 4600 MPa | ISO 178 | ||
Condition: Flexural Modulus | 11000 MPa | ASTM D790 | ||
Dry: Flexural Strength | 310 MPa |
ASTM D790 |
||
3.5% Strain;23 °C | 300 MPa | ISO 178 | ||
3.5% Strain;100 °C | 170 MPa | ISO 178 | ||
3.5% Strain;150 °C | 123 MPa | ISO 178 | ||
3.5% Strain;175 °C | 112 MPa | ISO 178 | ||
Condition: Flexural Strength | 249 MPa | ASTM D790 | ||
Dry: Compressive Strength | 148 MPa | ASTM D695 | ||
Dry: Shear Strength | 87.6 MPa | ASTM D732 | ||
Condition: Shear Strength | 73.8 MPa | ASTM D732 | ||
Dry: Poisson's Ratio | 0.39 | ASTM E132 | ||
Dry: Charpy Notched Impact Strength(23 °C) | 9.2 kJ/m² | ISO 179 1eA | ||
Dry: Charpy Unnotched Impact Strength(23 °C) | 60 kJ/m² | ISO 179 1eU | ||
Dry: Notched Izod Impact | 85 J/m | ASTM D256 | ||
23 °C | 9.1 kJ/m² | ISO 180 | ||
Izod Notched Impact: condition | 69 J/m | ASTM D256 | ||
Dry: Unnotched Izod Impact | 800 J/m | ASTM D256 | ||
23 °C | 62 kJ/m² | ISO 180 | ||
Thermal | Nominal Value | Test Method | ||
Dry: Heat Deflection Temperature, Unannealed | ||||
0.45 MPa | 303 °C | ISO 75-2/B | ||
1.8 MPa | 288 °C | ISO 75-2/A | ||
Dry: Heat Deflection Temperature, Annealed(1.8 MPa;3.2 mm) | 291 °C | ASTM D648 | ||
Dry: Melting Temperature | 310 °C | ASTM D570;ISO 11357-3 | ||
Dry: CLTE, Flow 0 - 100 °C 100 - 200 °C |
2.2E-5 cm/cm/°C 1.6E-5 cm/cm/°C |
ASTM E831 | ||
Dry: CLTE, Transverse 0 - 100 °C 100 - 200 °C |
6.1E-5 cm/cm/°C 1.0E-4 cm/cm/°C |
ASTM E831 | ||
Processing | Nominal Value | |||
Drying Temperature<Injection> | 120 °C | |||
Drying Time<Injection> | 4.0 hr | |||
Suggested Max Moisture<Injection> | 0.030 - 0.060 % | |||
Rear Temperature<Injection> | 316 - 321 °C | |||
Front Temperature<Injection> | 327 - 332 °C | |||
Processing Temp, Melt<Injection> | 321 - 335 °C | |||
Mold Temperature<Injection> | 66 - 93 °C | |||
Injection Rate<Injection> | 3 - 6 in/sec | |||
Holding Pressure<Injection> | 50 of injection pressure % |
Forever Co.,Ltd
Suppliers with verified business licenses