Feature: | Hydrolytic Degradable |
---|---|
CAS No.: | 32131-17-2 |
Formula: | 32131-17-2 |
Samples: |
BAG
|
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
Product Description | ||||
LNP THERMOCOMP MFB63 compound is based on Polypropylene (PP) resin containing 30% glass bead and 15% glass fiber. | ||||
General | ||||
Form | Resin Pellets | |||
Filler 30 % Glass Bead | 15 % Glass Fiber | |||
Feature Low Warpage | Structural | |||
Uses Consumer | Electrical | |||
Physical | Nominal Value | Test Method | ||
Mold Shrinkage, Flow | 0.4 - 0.5 % | Method | ||
Density / Specific Gravity | 1.22 g/cm³ | ISO 1183 | ||
Water Absorption(24 hrs;23 °C) | 0.02 % | ISO 62-1 | ||
Mechanical | Nominal Value | Test Method | ||
Izod Impact, Unnotched(80*10*4;23 °C) | 40 kJ/m² | ISO 180/1U | ||
Izod Impact, Notched(80*10*4;23 °C) | 10 kJ/m² | ISO 180/1A | ||
Tensile Stress, Yield(5 mm/min) | 64 MPa | ISO 527 | ||
Tensile Strain, Break(5 mm/min) | 3.3 % | ISO 527 | ||
Tensile Modulus(1 mm/min) | 5400 MPa | ISO 527 | ||
Flexural Stress, Yield(2 mm/min) | 95 MPa | ISO 178 | ||
Flexural Modulus(2 mm/min) | 4900 MPa | ISO 178 | ||
Thermal | Nominal Value | Test Method | ||
CTE, Flow(23°C to 60°C) | 3.5e-05 1/°C | ISO 11359-2 | ||
CTE, XFlow(23°C to 60°C) | 1.1E-04 1/°C | ISO 11359-2 | ||
HDT/Bf(0.45) | 154 °C | ISO 75/Bf | ||
HDT/Af(1.8) | 133 °C | ISO 75/Af | ||
Processing | Nominal Value | |||
Drying Temperature<Injection> | 80 °C | |||
Drying Time<Injection> | 4 hrs | |||
Melt Temperature<Injection> | 225 - 250 °C | |||
Front, Zone 3 Temperature<Injection> | 240 - 250 °C | |||
Middle, Zone 2 Temperature<Injection> | 215 - 225 °C | |||
Rear, Zone 1 Temperature<Injection> | 195 - 205 °C | |||
Mold Temperature<Injection> | 30 - 50 °C | |||
Back Pressure<Injection> | 0.2 - 0.3 MPa | |||
Screw Speed <Injection> | 30 - 60 rpm |
Suppliers with verified business licenses