Feature: | Plastics |
---|---|
CAS No.: | 9002-81-7 |
Formula: | C22h42o9si |
Samples: |
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
Product Description | ||||||
Chemical abbreviation according to ISO 1043-1: POM Molding compound ISO 9988- POM-K, M-GNR, 03-002 POM copolymer Standard- Injection molding type with high rigidity, hardness and toughness; good chemical resistance to solvents, fuel and strong alkalis as well as good hydrolysis resistance; high resistance to thermal and oxidative degradation. Monomers and additives are listed in EU-Regulation (EU) 10/2011 FDA compliant according to 21 CFR 177.2470 UL-registration for all colours and a thickness more than 1.5 mm as UL 94 HB, temperature index UL 746 B electrical 110 °C, mechanical 90 °C. Burning rate ISO 3795 and FMVSS 302 < 75 mm/min for a thickness more than 1 mm. Ranges of applications: automotive engineering, precision engineering, electric and electronical industry, domestic appliances. FDA = Food and Drug Administration (USA) FMVSS = Federal Motor Vehicle Safety Standard (USA) UL = Underwriters Laboratories (USA) | ||||||
General | ||||||
Form | Resin Pellets | |||||
Chemical Resistant Fuel Resistant Good Hardness | ||||||
Feature High Impact Hydrolysis Resistance Solvent Resistant | ||||||
Fda | Alkali Resistant | |||||
Appliances Engineered |
Engineering Parts Electrical | Automotive | ||||
Physical | Nominal Value | Test Method | ||||
Density / Specific Gravity | 1.41 g/cm³ | ISO 1183 | ||||
Melt Volume-Flow Rate, MVR(190 °C;2.16 kg) | 8.0 cm³/10 min | ISO 1133 | ||||
Molding Shrinkage, Across Flow | 1.9 % | ISO 294-4 | ||||
Molding Shrinkage, Flow | 2.0 % | ISO 294-4 | ||||
Water Absorption, Saturation(23 °C) | 0.65 % | ISO 62 | ||||
Water Absorption, Equilibrium(50% RH;23 °C) | 0.20 % | ISO 62 | ||||
Ball Indentation Hardness(30s) | 144 MPa | ISO 2039-1 | ||||
Mechanical | Nominal Value | Test Method | ||||
Tensile Modulus | 2850 MPa | ISO 527-2/1A | ||||
Tensile Stress, Yield | 64.0 MPa | ISO 527-2/1A/50 | ||||
Tensile Strain, Yield | 9.0 % | ISO 527-2/1A/50 | ||||
Nominal Tensile Strain at Break | 30 % | ISO 527-2/1A/50 | ||||
Tensile creep modulus 1 hr 1000 hr |
2500 MPa 1300 MPa |
ISO 899-1 | ||||
Flexural Modulus(23 °C) | 2700 MPa | ISO 178 | ||||
Compressive Stress 1% strain 6% Strain |
24.0 MPa 86.0 MPa |
ISO 604 | ||||
Charpy Notched Impact Strength -30 °C 23 °C |
6.0 kJ/m² 6.5 kJ/m² |
ISO 179 1eA | ||||
Charpy Unnotched Impact Strength(-30 °C) | 220 kJ/m² | ISO 179 1eU | ||||
Charpy Unnotched Impact Strength, Partial Break(23 °C) | 220 kJ/m² | ISO 179 1eU | ||||
Thermal | Nominal Value | Test Method | ||||
Heat Deflection Temperature, Unannealed 0.45 MPa 1.8 MPa |
160 °C 104 °C |
ISO 75-2/B ISO 75-2/A |
||||
Vicat Softening Temperature | 150 °C | ISO 306/B50 | ||||
Melting Point(10 °C/min) | 166 °C | ISO 11357-3 | ||||
CLTE, Flow | 1.1E-4 cm/cm/°C | ISO 11359-2 | ||||
CLTE, Transverse | 1.1E-4 cm/cm/°C | ISO 11359-2 | ||||
Effective Thermal Diffusivity | 4.85E-8 m²/s | Internal Method | ||||
Flame Rating 1.5 mm 3 mm |
HB HB |
UL 94 | ||||
Specific Heat Capacity of Melt | 2210 J/kg/°C | |||||
Melt Thermal Conductivity | 0.16 W/m-K | Internal Method |
High quality PC outdoor uses high UV resistant materials for LED lights monitoring lights security lights With almost 20 years in the modified engineering plastics,Forever Plastics is a high-tech manufacture integrating R&D, production and sales of high-performance resin or polymer ,including PC,PP,PA6,PA66, PBT,PET, PC/ABS, PC/PBT, PC/PET alloy compounds,TPE,TPU, PE for rotomolding with the property of the flame retardant, glass fiber reinforced, high glossy, UV resistance.....with the annual output value of USD 65 million in 2021Our customers are Philips,Osram,Cree,Schneider,Siemens,etc. for years in the electrical&electronics components, Automotive parts, House appliance,LED lights.....
1.Are you the manufacture or trader?
"-We are the manufacture actually.
In order to export we register as the trader.
You are warmly welcome to visit our factory.
2. How can I check the quallty of the raw materlals?
"-We will provide you the sample materials for testing.
3. What is your lead tlme?
"-Usually we can ship within 7-15 days
4.What Is your payment term?
"-T/TLC.This is negotiable.
5.What Is the shipping method?
"-It could be shipped by seaby air or byexpress(EMSUPSDHLTNTFEDEX and ect).
6.How do you make our business long-term and good relationship?
"- We are looking partners all over the world.
If you are interested,please kindly contact with us.
Suppliers with verified business licenses