Feature: | Resin Pellets |
---|---|
CAS No.: | 25037-45-0 |
Formula: | 25037-45-0 |
Samples: |
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
Good Wear Resistance POM for fire hoses barrels cases for fountain pens Celanese c0304
Product Description | ||||
POM copolymerInformation provided by forever | ||||
General | ||||
Form | Resin Pellets | |||
Physical | Nominal Value | Test Method | ||
Density / Specific Gravity | 1.40 g/cm³ | ISO 1183 | ||
Water Absorption at Saturation | 0.650 % | ISO 62 | ||
Linear Mold Shrinkage, Flow | 1.85 % | ISO 294-4 | ||
Linear Mold Shrinkage, Transverse | 1.75 % | ISO 294-4 | ||
Melt Volume-Flow Rate, MVR(2.16 | kg;190 °C;cm3/10min)26.0 cm³/10 min | ISO 1133 | ||
Mechanical | Nominal Value | Test Method | ||
Tensile Strength, Yield | 56.0 MPa | ISO 527-2/1A | ||
Elongation at Break | 45.0 % | |||
Elongation at Yield | 8.00 % | ISO 527-2/1A | ||
Tensile Modulus | 2600 MPa | ISO 527-2/1A | ||
Flexural Modulus | 2350 MPa | ISO 178 | ||
Charpy Impact Unnotched Temperature; 23 °C Temperature; -30 °C |
150 kJ/m² 145 kJ/m² |
ISO 179 1eU | ||
Charpy Impact, Notched Temperature; 23 °C Temperature; -30 °C |
5.5 kJ/m² 5.5 kJ/m² |
ISO 179 1eA | ||
Thermal | Nominal Value | Test Method | ||
CTE, Flow | 140 µm/m-°C | ISO 11359-2 | ||
CLTE, Transverse | 140 µm/m-°C | ISO 11359-2 | ||
Melting Point(10°C/min) | 166 °C | ISO 11357-1/-2/-3 | ||
Deflection Temperature(Pressure; 1.8 MPa) | 90.0 °C | ISO 75-1/-2 |
Processing | Nominal Value |
Processing Temperature | 80.0 - 120 °C 190 - 200 °C |
Feed Temperature | 60.0 - 80.0 °C |
Middle Barrel Temperature | 20.0 - 30.0 °C |
Zone 1 | 170 - 175 °C |
Barrel - Zone 2 Temperature | 180 - 185 °C |
Barrel - Zone 3 Temperature | 180 - 195 °C |
Zone 4 Temperature | 180 - 200 °C |
Die Temperature | 190 - 200 °C |
Melt Temperature | 180 - 200 °C |
Drying Temperature | 120 - 140 °C |
Dry Time | 3.00 - 4.00 hour |
Moisture Content | < = 0.150 % |
Injection Pressure | 60.0 - 120 MPa |
Hold Pressure | 60.0 - 120 MPa |
Back Pressure | < = 4.00 MPa |
Screw Speed Diameter 55 mm Diameter 40 mm Diameter 25 mm |
70.0 rpm 100 rpm 150 rpm |
Suppliers with verified business licenses