Feature: | Oxidative Degradable |
---|---|
CAS No.: | 32131-17-2 |
Formula: | (C12h22n2o2)N |
Samples: |
BAG
|
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
PA66-G30 are Flame Rated Good Aesthetics Good Dimensional Stability Heat Resistant
https://forever-plastics.en.made-in-china.com/product/rJwRvlcdZpWD/China-Nylon-PA6-GF33-PA66-Granules-PA6-with-30GF-Polyamide-PA66-30-GF-PA6-Material.html Heat-conducting nylon
Product Description | ||
PA66-G30 is a Polyamide 66 (Nylon 66) material filled with 30% glass fiber. It is available in Asia Pacific or North America for injection molding. Important attributes of PA66-G30 are: Flame Rated Good Aesthetics Good Dimensional Stability Heat Resistant High Strength Typical applications include: Appliances Electrical/Electronic Applications Engineering/Industrial Parts Tools |
||
General | ||
Form Resin Pellets | ||
Filler 30 % Glass Fiber | ||
Feature Good Dimensional Good Surface Appearance Good Thermal | ||
Uses | Appliance Components Electrical Power Mechanical Parts |
|
Physical Nominal Value Test Method | ||
Density / Specific Gravity 1.36 g/cm³ ISO 1183 | ||
Molding Shrinkage, Across Flow 0.90 % ISO 2577 | ||
Molding Shrinkage, Flow 0.30 % ISO 2577 | ||
Water Absorption, Equilibrium(50% RH;23 °C) 1.8 % ISO 62 | ||
Ash Content 30 % ISO 3451-1 | ||
Mechanical Nominal Value Test Method | ||
Tensile Stress 185 MPa ISO 527-2/10 | ||
Tensile Strain, Break 3.0 % ISO 527-2/10 | ||
Flexural Modulus(2 mm/min) 8200 MPa ISO 178 | ||
Flexural Stress(2 mm/min) 270 MPa ISO 178 | ||
Notched Izod Impact Strength(23 °C) 14 kJ/m² ISO 180 | ||
Thermal Nominal Value Test Method | ||
Heat Deflection Temperature, Unannealed | ||
0.45 MPa 255 °C ISO 75-2/B | ||
1.8 MPa 250 °C ISO 75-2/A | ||
Flame Rating HB UL 94 | ||
Electrical Nominal Value Test Method | ||
Volume Resistivity 1.0e+15 ohms ·cm IEC 60093 | ||
Processing | Nominal Value | |
Drying Temperature - Desiccant Dryer<Injection> | 90 - 110 °C | |
Drying Time - Desiccant Dryer<Injection> | 4.0 - 6.0 hr | |
Rear Temperature<Injection> | 260 - 275 °C | |
Middle Temperature<injection> | 270 - 280 °C | |
Front Temperature<Injection> | 280 - 290 °C | |
Processing Temp, Melt<Injection> | 270 - 290 °C | |
Mold Temperature<Injection> | 50 - 120 °C | |
Injection Rate<Injection> | Moderate-Fast |
Forever Co.,Ltd
Suppliers with verified business licenses