Feature: | Hydrolytic Degradable |
---|---|
CAS No.: | 32131-17-2 |
Formula: | 32131-17-2 |
Samples: |
BAG
|
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
Product Description | ||||
LNP THERMOCOMP MF004S compound is based on Polypropylene (PP) resin containing 20% glass fiber. Added features of this grade include: Heat Stabilized. | ||||
General | ||||
Form | Resin Pellets | |||
Filler | 20 % Glass Fiber | |||
Feature | Good Thermal Good Hardness | Structural | ||
UL Yellow Card | E121562-101283897 | |||
Uses Consumer | Industria | Electrical | ||
Physical | Nominal Value | Test Method | ||
Density / Specific Gravity | 1.04 g/cm³ | ASTM D792 | ||
Mold Shrinkage, Flow(24 hrs) | 0.4 % | ASTM D955 | ||
Mold Shrinkage, XFlow(24 hrs) | 1 % | ASTM D955 | ||
Mechanical | Nominal Value | Test Method | ||
Izod Impact, Unnotched(23 °C) | 534 J/m | ASTM D4812 | ||
Izod Impact, Notched(23 °C) | 42 J/m | ASTM D256 | ||
Tensile Stress, Break | 66 MPa | ASTM D638 | ||
Tensile Strain, Break | 3.1 % | ASTM D638 | ||
Flexural Stress | 106 MPa | ASTM D790 | ||
Flexural Modulus | 4130 MPa | ASTM D790 | ||
Thermal | Nominal Value | Test Method | ||
UL Recognized(≥ 1 mm) | HB | UL 94 | ||
Heat Deflection Temperature[HDT], Unannealed(3.2 mm;1.82 MPa) | 145 °C | ASTM D648 | ||
Relative Temp Index, Elec | 65 °C | UL 746B | ||
Relative Temp Index, Mechanical with Impact | 65 °C | UL 746B | ||
Relative Temp Index, Mechanical without Impact | 65 °C | UL 746B | ||
Electrical | Nominal Value | Test Method | ||
Comparative Tracking Index, CTI | PLC 0 | UL 746A | ||
Hot-wire Ignition, HWI ≥ 3 mm ≥ 1 mm |
PLC 2 PLC 3 |
UL 746A | ||
High Amp Arc Ignition, HAI ≥ 1.5 mm ≥ 1 mm |
PLC 1 PLC 3 |
UL 746A | ||
High Voltage Arc Tracking Rate, HVTR | PLC 1 | UL 746A | ||
Arc Resistance, Tungsten Electrode | PLC 6 | ASTM D495 | ||
Processing | Nominal Value | |||
Drying Temperature<Injection> | 80 °C | |||
Drying Time<Injection> | 4 hrs | |||
Melt Temperature<Injection> | 225 - 250 °C | |||
Front, Zone 3 Temperature<Injection> | 240 - 250 °C | |||
Middle, Zone 2 Temperature<Injection> | 215 - 225 °C | |||
Rear, Zone 1 Temperature<Injection> | 195 - 205 °C | |||
Mold Temperature<Injection> | 30 - 50 °C | |||
Back Pressure<Injection> | 0.2 - 0.3 MPa | |||
Screw Speed <Injection> | 30 - 60 rpm |
Suppliers with verified business licenses