Feature: | Natural Color |
---|---|
CAS No.: | 9003-54-7 |
Formula: | C33h33n3X2 |
Samples: |
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
Product Description | |||||
GFAS-10 is an Acrylonitrile Styrene Copolymer (AS) material filled with 10% glass fiber. It is available in Asia Pacific or North America for injection molding. Important attributes of GFAS-10 are: Flame Rated Good Dimensional Stability Low Shrinkage Warp Resistant | |||||
General | |||||
Form | Resin Pellets | ||||
Filler | 10 % Glass Fiber | ||||
Feature | Good Dimensional | ||||
UL Yellow Card | E171666-225779 | ||||
Physical | Nominal Value | Test Method | |||
Density / Specific Gravity(23 °C) | 1.16 g/cm³ | ISO 1183 | |||
Melt Mass-Flow Rate, MFR(220 °C;10 kg) | 20 g/10min | ISO 1133 | |||
Molding Shrinkage(23 °C) | 0.20 - 0.40 % | ISO 2577 | |||
Mechanical | Nominal Value | Test Method | |||
Tensile Stress | 90.0 MPa | ISO 527-2/10 | |||
Tensile Strain, Break | 3.0 % | ISO 527-2/10 | |||
Flexural Modulus(2 mm/min) | 550 MPa | ISO 178 | |||
Flexural Stress(2 mm/min) | 130 MPa | ISO 178 | |||
Notched Izod Impact Strength(23 °C) | 4.5 kJ/m² | ISO 180 | |||
Thermal | Nominal Value | Test Method | |||
Heat Deflection Temperature, Unannealed(1.8 MPa) | 100 °C | ISO 75-2/A | |||
Vicat Softening Temperature | 110 °C | ISO 306/B120 | |||
Flame Rating 1.6 mm 3.2 mm |
HB HB |
UL 94 | |||
Electrical | Nominal Value | Test Method | |||
Volume Resistivity | 1.0E+16 ohms ·cm | IEC 60093 | |||
Electric Strength, in Oil(2 mm) | 23 kV/mm | IEC 60243-1 | |||
Processing | Nominal Value | ||||
Drying Temperature<Injection> | 80 - 90 °C | ||||
Drying Time<Injection> | 2.0 - 4.0 hr | ||||
Rear Temperature<Injection> | 190 - 215 °C | ||||
Middle Temperature<injection> | 210 - 250 °C | ||||
Front Temperature<Injection> | 220 - 260 °C | ||||
Processing Temp, Melt<Injection> | 210 - 250 °C | ||||
Mold Temperature<Injection> | 40 - 90 °C | ||||
Injection Rate<Injection> | Slow-Moderate | ||||
Back Pressure<Injection> | 0.00 - 1.00 MPa |
Suppliers with verified business licenses