Feature: | Plastics |
---|---|
CAS No.: | 25766-59-0 |
Formula: | C6h4c(CH3)2c6h4oco2-]N |
Samples: |
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
Good flame retardancy ABS Heat resistance 5VA Display Chassis Modem Power Panel
https://forever-plastics.en.made-in-china.com/product-list-1.html
Product Description | |||||
Features: Good flame retardancy; Heat resistance; 0.75mm V-2; 1.0mm V-0; 2.5mm 5VA Application: Display; Chassis; Modem; Power Panel; Power Outlet; Car Battery; Cash Register Housing; Printer Housing; Remote controls; light boxes; fax machines; projectors; large MFPs; coffee machines; TV front and rear frames and car audio consoles |
|||||
General | |||||
Form | Resin Pellets | ||||
Feature | Good Thermal | Flame Retardant | Outdoor | ||
UL Yellow Card E56070-103035269 | |||||
Batteries Displays Housing | |||||
Light Covers Printer Parts Panel | |||||
Automotive Printer Chassis Remote Controls | |||||
Coffee Machine | |||||
Physical Nominal Value Test Method | |||||
Density / Specific Gravity(23 °C) 1.22 g/cm³ ISO 1183 | |||||
Melt Volume-Flow Rate, MVR(220 °C;10 kg) 34 cm³/10 min ISO 1133 | |||||
Molding Shrinkage 0.30 - 0.60 % ISO 294-4 | |||||
Mechanical Nominal Value Test Method | |||||
Tensile Stress, Yield(50 mm/min) 34.0 MPa ISO 527-2/50 | |||||
Tensile Stress, Break(50 mm/min) 27.0 MPa ISO 527-2/50 | |||||
Tensile Strain, Break(50 mm/min) 10 % ISO 527-2/50 | |||||
Flexural Modulus(2 mm/min) 1800 MPa ISO 178 | |||||
Flexural Stress(2 mm/min) 54.0 MPa ISO 178 | |||||
C harpy Notched Impact Strength ISO 179 | |||||
-30 °C 7.0 kJ/m² | |||||
23 °C 12 kJ/m² | |||||
Notched Izod Impact Strength ISO 180/1A | |||||
-30 °C 7.0 kJ/m² | |||||
23 °C 13 kJ/m² | |||||
Thermal Nominal Value | Test Method | ||||
Deflection Temperature Under Load, Unannealed(1.8 MPa) | 82.0 °C | ISO 75-2/A | |||
Deflection Temperature Under Load, Annealed(1.8 MPa) | 92.0 °C | ISO 75-2/A | |||
Vicat Softening Temperature | |||||
5 kg;50 ºC/hr | 90.0 °C | ISO 306/B50 | |||
50 ºC/hr;1 kg | 101 °C | ISO 306/A50 | |||
CLTE, Flow | 8.3E-5 cm/cm/°C | ISO 11359-2 | |||
Flame Rating 0.75 mm 1 mm 2.5 mm |
V-2 V-0 5VA |
UL 94 | |||
Processing | Nominal Value | ||||
Drying Time | 80 - 85 °C | ||||
Drying Temperature | 2 - 4 h | ||||
Barrell Temperature - Front | 190 - 220 °C | ||||
Barrell Temperature - Middle | 190 - 220 °C | ||||
Barrell Temperature - Rear | 180 - 210 °C | ||||
Mold Temperature | 40 - 70 °C | ||||
Injection Pressure | 50 - 80 % | ||||
Hold Pressure | 20 - 50 % | ||||
Back Pressure | 0.5 - 1 MPa |
Forever Co.,Ltd
Suppliers with verified business licenses