Feature: | Oxidative Degradable |
---|---|
CAS No.: | 32131-17-2 |
Formula: | (C12h22n2o2)N |
Samples: |
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
Polyamide 66 30% glass-fiber reinforced polyamide 66 for injection moulding
https://forever-plastics.en.made-in-china.com/product/rJwRvlcdZpWD/China-Nylon-PA6-GF33-PA66-Granules-PA6-with-30GF-Polyamide-PA66-30-GF-PA6-Material.html Heat-conducting nylon
Product Description | ||
Polyamide 66, 30% glass-fiber reinforced polyamide 66 for injection moulding. | ||
General | ||
Form Resin Pellets | ||
Filler 30 % Glass Fiber | ||
Feature | Good Surface Appearance Good Dimensional Good Thermal Abrasion Resistant Good Electrical Properties Outdoor |
|
Physical Nominal Value Test Method | ||
Density / Specific Gravity 1.36 g/cm³ ISO 1183 | ||
Mechanical Nominal Value Test Method | ||
Tensile Stress 180 MPa ISO 527-2 | ||
Tensile Strain, Break 3.0 % ISO 527-2 | ||
Flexural Modulus 8000 MPa ISO 178 | ||
Flexural Stress 260 MPa ISO 178 | ||
C harpy Notched Impact Strength(23 °C) 11 kJ/m² ISO 179 | ||
Thermal Nominal Value Test Method | ||
Deflection Temperature Under Load, Unannealed | ||
0.45 MPa 260 °C ISO 75-2/B | ||
1.8 MPa 250 °C ISO 75-2/A | ||
Melting Temperature(DSC) 263 °C ISO 3146 | ||
Flame Rating HB UL 94 | ||
Electrical Nominal Value Test Method | ||
Surface Resistivity 1.0E+12 ohms IEC 60093 | ||
Volume Resistivity 1.0e+15 ohms ·cm IEC 60093 | ||
Electric Strength(2 mm) 24 kV/mm IEC 60243-1 | ||
Processing | Nominal Value | |
Drying Temperature<Injection> | 80 °C | |
Drying Time<Injection> | 4.0 hr | |
Suggested Max Moisture<Injection> | 0.20 % | |
Rear Temperature | 270 - 275 °C | |
Middle Temperature | 280 - 285 °C | |
Front Temperature | 285 - 290 °C | |
Mold Temperature | 60 - 90 °C | |
Injection Pressure | 35.0 - 125 MPa | |
Injection Rate | Moderate - Fast | |
Back Pressure | 0.138 - 0.345 MPa | |
Screw Speed | 80 - 200 rpm |
Forever Co.,Ltd
Suppliers with verified business licenses