Feature: | Oxidative Degradable |
---|---|
CAS No.: | 32131-17-2 |
Formula: | (C12h22n2o2)N |
Samples: |
BAG
|
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
Polyamide6 Mineral Filled 20% Automotive Intake manifold Exterior trim Interior
https://forever-plastics.en.made-in-china.com/product/rJwRvlcdZpWD/China-Nylon-PA6-GF33-PA66-Granules-PA6-with-30GF-Polyamide-PA66-30-GF-PA6-Material.html Heat-conducting nylon
Product Description | |||||
Polyamide 6 - Mineral Filled, 20% Automotive: Intake manifold, Exterior trim, Interior trim, Electrical components and connectors Electrical & Electronic: Low voltage switch gear/power distribution, Lighting, Power connectors , MCB, |
|||||
General | |||||
Form Resin Pellets | |||||
Filler 20 % Mineral | |||||
Feature | Chlorinated Flame R t d t |
||||
e ar an | |||||
Uses | Automotive Connector |
Automotive Exterior Electrical | Automotive Interior | ||
Physical Nominal Value Test Method | |||||
Density / Specific Gravity 1.36 g/cm³ ASTM D792 | |||||
Water Absorption, Saturation(23 °C) 5.5 % ISO 62 | |||||
Water Absorption, Equilibrium(50% RH;23 °C) 0.95 % ISO 62 | |||||
Mechanical Nominal Value Test Method | |||||
Tensile Strength, Break 58.0 MPa ASTM D638 | |||||
Tensile Elongation, Break 3.3 % ASTM D638 | |||||
Flexural Strength 100 MPa ASTM D790 | |||||
Notched Izod Impact 30 J/m ASTM D256A | |||||
Thermal Nominal Value Test Method | |||||
Deflection Temperature Under Load, Unannealed ASTM D648 | |||||
0.45 MPa 185 °C | |||||
1.8 MPa 180 °C | |||||
Glow Wire Flammability Index IEC 60695-2-12 | |||||
1.2 mm 960 °C | |||||
3 mm 960 °C | |||||
Electrical Nominal Value Test Method | |||||
Dielectric Strength(2 mm) 22 kV/mm ASTM D149 | |||||
Comparative Tracking Index 600 V IEC 60112 | |||||
Processing | Nominal Value | ||||
Drying Temperature<Injection> | 85 - 90 °C | ||||
Drying Time<Injection> | 3.0 - 4.0 hr | ||||
Rear Temperature<Injection> | 235 - 245 °C | ||||
Middle Temperature<injection> | 235 - 255 °C | ||||
Nozzle Temperature<Injection> | 235 - 255 °C | ||||
Processing Temp, Melt<Injection> | 235 - 260 °C | ||||
Mold Temperature<Injection> | 55 - 80 °C |
Forever Co.,Ltd
Suppliers with verified business licenses