Feature: | Natural Color |
---|---|
CAS No.: | 9003-54-7 |
Formula: | C33h33n3X2 |
Samples: |
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
Product Description | ||||||
Polypropylene copolymer UL94 V0. Low smoke emission, without halogen and Antimony oxide. | ||||||
General | ||||||
Form Resin Pellets | ||||||
Feature |
Non-Brominated & Non- Chlorinated Flame Retardant |
Antimony Free Ec 1907/2006 (Reach) |
Low Smoke | |||
UL Yellow Card | E477602-102433013 | |||||
Uses Appliances | Electrical | |||||
Physical | Nominal Value | Test Method | ||||
Density / Specific Gravity | 1.05 g/cm³ | ASTM D792 | ||||
Melt Mass-Flow Rate, MFR(230 °C;2.16 kg) | 15 g/10min | ASTM D1238 | ||||
Molding Shrinkage | 1.5 % | Internal Method | ||||
Mechanical | Nominal Value | Test Method | ||||
Tensile Strength, Yield | 23.0 MPa | ASTM D638 | ||||
Tensile Elongation, Yield | 3.2 % | ASTM D638 | ||||
Tensile Elongation, Break | 22 % | ASTM D638 | ||||
Flexural Modulus | 1600 MPa | ASTM D790 | ||||
C harpy Notched Impact Strength(23 °C) | 1.5 kJ/m² | ISO 179 1eA | ||||
C harpy Unnotched Impact Strength(23 °C) | 20 kJ/m² | ISO 179 1eU | ||||
Notched Izod Impact(23 °C) | 35 J/m | ASTM D256 | ||||
Thermal | Nominal Value | Test Method | ||||
Deflection Temperature Under Load, Unannealed(1.8 MPa) | 60.0 °C | ASTM D648 | ||||
Vicat Softening Temperature(50 °C/h;50 N;Rate A;Loading 2) | 77.0 °C | ASTM D1525 | ||||
Ball Pressure Test(125 °C) | Pass | IEC 335 | ||||
Flame Rating 1.6 mm 3.2 mm |
V-0 V-0 |
UL 94 | ||||
Glow Wire Flammability Index(3 mm) | 960 °C | IEC 60695-2-12 | ||||
Glow Wire Ignition Temperature [GWIT](3 mm) | 775 °C | IEC 60695-2-13 | ||||
Oxygen Index | 30 % | ASTM D2863 | ||||
Needle Flame Test | Pass | IEC 60695-11-5 | ||||
Electrical | Nominal Value | Test Method | ||||
Comparative Tracking Index | 600 V | IEC 60112 | ||||
Processing | Nominal Value | |||||
Drying Temperature<Injection> | 80 °C | |||||
Drying Time<Injection> | 2.0 hr | |||||
Rear Temperature<Injection> | 190 °C | |||||
Middle Temperature<injection> | 210 °C | |||||
Front Temperature<Injection> | 220 °C | |||||
Mold Temperature<Injection> | 40 - 60 °C |
Suppliers with verified business licenses